Gracias Gracias:  0
Me Gusta Me Gusta:  0
No me Gusta No me Gusta:  0
Mostrando resultados del 1 al 8 de 8

Tema: lento pero muy lento al arrancar

  1. #1
    Fecha de Ingreso
    24-abril-2007
    Mensajes
    13
    Post Thanks / Like
    Poder de Credibilidad
    0

    lento pero muy lento al arrancar

    hola amigos, desde hace unos dias soy ususario de suse 10.2 y las primeras horas funciono a las mil maravillas pero luego de actualizarlo con los repositorios packman se ha puesto lento pero muy lento al arrancar.... del orden de los 5 minutos, mi maquina no es tan mala es un pentium D de 2.8 con 1 Gbyte de RAM. No se que hacer... estoy a punto de volverme a mandriva desde ya... muchas gracias!!!

  2. #2
    Fecha de Ingreso
    07-febrero-2007
    Ubicación
    Ourense
    Mensajes
    8.609
    Post Thanks / Like
    Poder de Credibilidad
    22
    Postea el registro de arranque...
    /var/log/boot.msg o /var/log/boot.log

    ¿se bloquea en algún lado? ¿Se demora en alguna cosa concreta? ¿probaste a iniciar en modo "verbose" (pulsas ESC mientras está arrancando, para ir viendo lo que hace)?

    Salud!!

  3. #3
    Fecha de Ingreso
    24-abril-2007
    Mensajes
    13
    Post Thanks / Like
    Poder de Credibilidad
    0
    Cita Iniciado por karlggest
    Postea el registro de arranque...
    /var/log/boot.msg o /var/log/boot.log

    ¿se bloquea en algún lado? ¿Se demora en alguna cosa concreta? ¿probaste a iniciar en modo "verbose" (pulsas ESC mientras está arrancando, para ir viendo lo que hace)?

    Salud!!
    Muchas Gracias por tu interés!!!.... lo que pasa es que se torna lento en el momento en que aparece el puntero del mouse en pantalla y el fondo está gris (estoy usando KDE) luego de unos minutos aparece esa pantalla azul de suse nuevamente y al rato vuelve a estar mucho tiempo en ese fondo gris en el cual lento muy lento empiezan a aparecer lo elmentos del escritorio hasta que al final está usable pero esta poco operativo hasta unos 30 segundos más.... aki está mi boot.msg como me pediste.... salud!!!

    Inspecting /boot/System.map-2.6.18.2-34-default
    Loaded 23374 symbols from /boot/System.map-2.6.18.2-34-default.
    Symbols match kernel version 2.6.18.
    No module symbols loaded - kernel modules not enabled.

    klogd 1.4.1, log source = ksyslog started.
    <5>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
    <6>BIOS-provided physical RAM map:
    <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    <4> BIOS-e820: 00000000000c0000 - 0000000000100000 (reserved)
    <4> BIOS-e820: 0000000000100000 - 0000000037d17000 (usable)
    <4> BIOS-e820: 0000000037d17000 - 0000000037d1f000 (reserved)
    <4> BIOS-e820: 0000000037d1f000 - 0000000037da9000 (usable)
    <4> BIOS-e820: 0000000037da9000 - 0000000037dad000 (reserved)
    <4> BIOS-e820: 0000000037dad000 - 0000000037e55000 (usable)
    <4> BIOS-e820: 0000000037e55000 - 0000000037eef000 (ACPI NVS)
    <4> BIOS-e820: 0000000037eef000 - 0000000037f00000 (ACPI data)
    <4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    <5>0MB HIGHMEM available.
    <5>894MB LOWMEM available.
    <6>found SMP MP-table at 000fe6a0
    <7>On node 0 totalpages: 228949
    <7> DMA zone: 4096 pages, LIFO batch:0
    <7> Normal zone: 224853 pages, LIFO batch:31
    <6>DMI 2.4 present.
    <6>Using APIC driver default
    <6>IO/L-APIC allowed because system is MP or new enough
    <7>ACPI: RSDP (v000 INTEL ) @ 0x000fe020
    <7>ACPI: RSDT (v001 INTEL D11020M 0x00000422 0x01000013) @ 0x37efe038
    <7>ACPI: FADT (v001 INTEL D11020M 0x00000422 MSFT 0x01000013) @ 0x37efd000
    <7>ACPI: MADT (v001 INTEL D11020M 0x00000422 MSFT 0x01000013) @ 0x37ef8000
    <7>ACPI: MCFG (v001 INTEL D11020M 0x00000422 MSFT 0x01000013) @ 0x37ef7000
    <7>ACPI: DSDT (v001 INTEL D11020M 0x00000422 MSFT 0x01000013) @ 0x00000000
    <6>ATI board detected. Disabling timer routing over 8254.
    <6>ACPI: PM-Timer IO Port: 0x408
    <7>ACPI: Local APIC address 0xfee00000
    <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    <4>Processor #0 15:4 APIC version 20
    <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    <4>Processor #1 15:4 APIC version 20
    <6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
    <6>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
    <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    <6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    <6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    <6>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    <6>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    <4>IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
    <7>ACPI: IRQ0 used by override.
    <7>ACPI: IRQ2 used by override.
    <4>Enabling APIC mode: Flat. Using 1 I/O APICs
    <6>Using ACPI (MADT) for SMP configuration information
    <4>Allocating PCI resources starting at 40000000 (gap: 37f00000:c8080000)
    <4>Detected 2800.529 MHz processor.
    <4>Built 1 zonelists. Total pages: 228949
    <5>Kernel command line: root=/dev/hda2 vga=0x31a resume=/dev/hda4 splash=silent
    <6>bootsplash: silent mode.
    <7>mapped APIC to ffffd000 (fee00000)
    <7>mapped IOAPIC to ffffc000 (fec00000)
    <6>Enabling fast FPU save and restore... done.
    <6>Enabling unmasked SIMD FPU exception support... done.
    <6>Initializing CPU#0
    <4>PID hash table entries: 4096 (order: 12, 16384 bytes)
    <4>Console: colour dummy device 80x25
    <4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    <4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    <6>Memory: 900392k/915796k available (1697k kernel code, 14588k reserved, 968k data, 196k init, 0k highmem)
    <4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
    <4>Calibrating delay using timer specific routine.. 5606.86 BogoMIPS (lpj=11213730)
    <6>Security Framework v1.0.0 initialized
    <4>Mount-cache hash table entries: 512
    <7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001
    <7>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001
    <4>monitor/mwait feature present.
    <4>using mwait in idle threads.
    <6>CPU: Trace cache: 12K uops, L1 D cache: 16K
    <6>CPU: L2 cache: 1024K
    <6>CPU: Physical Processor ID: 0
    <6>CPU: Processor Core ID: 0
    <7>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000641d 00000000 00000001
    <6>Intel machine check architecture supported.
    <6>Intel machine check reporting enabled on CPU#0.
    <6>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
    <6>CPU0: Thermal monitoring enabled
    <4>Compat vDSO mapped to ffffe000.
    <6>Checking 'hlt' instruction... OK.
    <6>SMP alternatives: switching to UP code
    <6>checking if image is initramfs... it is
    <6>Freeing initrd memory: 3258k freed
    <6>ACPI: Core revision 20060707
    <4>CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
    <6>SMP alternatives: switching to SMP code
    <4>Booting processor 1/1 eip 3000
    <6>Initializing CPU#1
    <4>Calibrating delay using timer specific routine.. 5600.71 BogoMIPS (lpj=11201438)
    <7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001
    <7>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001
    <4>monitor/mwait feature present.
    <6>CPU: Trace cache: 12K uops, L1 D cache: 16K
    <6>CPU: L2 cache: 1024K
    <6>CPU: Physical Processor ID: 0
    <6>CPU: Processor Core ID: 1
    <7>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000641d 00000000 00000001
    <6>Intel machine check architecture supported.
    <6>Intel machine check reporting enabled on CPU#1.
    <6>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
    <6>CPU1: Thermal monitoring enabled
    <4>CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
    <6>Total of 2 processors activated (11207.58 BogoMIPS).
    <4>ENABLING IO-APIC IRQs
    <6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    <3>..MP-BIOS bug: 8254 timer not connected to IO-APIC
    <6>...trying to set up timer (IRQ0) through the 8259A ... failed.
    <6>...trying to set up timer as Virtual Wire IRQ... works.
    <6>checking TSC synchronization across 2 CPUs: passed.
    <6>Brought up 2 CPUs
    <4>migration_cost=1784
    <6>NET: Registered protocol family 16
    <6>ACPI: bus type pci registered
    <3>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
    <3>PCI: Not using MMCONFIG.
    <6>PCI: Using configuration type 1
    <4>Setting up standard PCI resources
    <6>ACPI: Interpreter enabled
    <6>ACPI: Using IOAPIC for interrupt routing
    <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
    <7>PCI: Probing PCI hardware (bus 00)
    <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
    <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
    <7>Boot video device is 0000:01:05.0
    <6>PCI: Transparent bridge - 0000:00:14.4
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    <6>Linux Plug and Play Support v0.97 (c) Adam Belay
    <6>pnp: PnP ACPI init
    <6>pnp: PnP ACPI: found 11 devices
    <6>PnPBIOS: Disabled by ACPI PNP
    <6>PCI: Using ACPI for IRQ routing
    <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    <6>pnp: 00:07: ioport range 0x400-0x4cf could not be reserved
    <6>pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
    <6>PCI: Bridge: 0000:00:01.0
    <6> IO window: 2000-2fff
    <6> MEM window: 60100000-601fffff
    <6> PREFETCH window: 40000000-5fffffff
    <6>PCI: Bridge: 0000:00:14.4
    <6> IO window: 1000-1fff
    <6> MEM window: 60000000-600fffff
    <6> PREFETCH window: disabled.
    <6>NET: Registered protocol family 2
    <4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    <4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    <4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    <6>TCP: Hash tables configured (established 131072 bind 65536)
    <6>TCP reno registered
    <6>Machine check exception polling timer started.
    <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    <5>apm: disabled - APM is not SMP safe.
    <6>audit: initializing netlink socket (disabled)
    <5>audit(1178221957.888:1): initialized
    <4>Total HugeTLB memory allocated, 0
    <5>VFS: Disk quotas dquot_6.5.1
    <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    <6>Initializing Cryptographic API
    <6>io scheduler noop registered
    <6>io scheduler anticipatory registered
    <6>io scheduler deadline registered
    <6>io scheduler cfq registered (default)
    <6>vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 10240k, total 131072k
    <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=50
    <6>vesafb: protected mode interface info at c000:52be
    <6>vesafb: pmi: set display start = c00c532c, set palette = c00c5366
    <6>vesafb: pmi: ports = 2010 2016 2054 2038 203c 205c 2000 2004 20b0 20b2 20b4
    <6>vesafb: scrolling: redraw
    <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 59769 bytes, v3).
    <4>Console: switching to colour frame buffer device 156x60
    <6>fb0: VESA VGA frame buffer device
    <6>isapnp: Scanning for PnP cards...
    <6>isapnp: No Plug & Play device found
    <6>Real Time Clock Driver v1.12ac
    <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    <6>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    <4>floppy0: no floppy controllers found
    <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
    <6>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    <6>serio: i8042 AUX port at 0x60,0x64 irq 12
    <6>serio: i8042 KBD port at 0x60,0x64 irq 1
    <6>mice: PS/2 mouse device common for all mice
    <6>input: PC Speaker as /class/input/input0
    <6>input: AT Translated Set 2 keyboard as /class/input/input1
    <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    <6>md: bitmap version 4.39
    <6>NET: Registered protocol family 1
    <4>Using IPI No-Shortcut mode
    <6>ACPI: (supports S0 S1 S3 S4 S5)
    <6>Freeing unused kernel memory: 196k freed
    <6>Time: tsc clocksource has been installed.
    <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    <5>SCSI subsystem initialized
    <7>libata version 2.00 loaded.
    <7>sata_sil 0000:00:11.0: version 2.0
    <6>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 177
    <6>ata1: SATA max UDMA/100 cmd 0xF8826680 ctl 0xF882668A bmdma 0xF8826600 irq 177
    <6>ata2: SATA max UDMA/100 cmd 0xF88266C0 ctl 0xF88266CA bmdma 0xF8826608 irq 177
    <6>scsi0 : sata_sil
    <6>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
    <6>ata1: SATA link down (SStatus 0 SControl 310)
    <6>scsi1 : sata_sil
    <6>ata2: SATA link down (SStatus 0 SControl 310)
    <6>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 185
    <6>ata3: SATA max UDMA/100 cmd 0xF8828480 ctl 0xF882848A bmdma 0xF8828400 irq 185
    <6>ata4: SATA max UDMA/100 cmd 0xF88284C0 ctl 0xF88284CA bmdma 0xF8828408 irq 185
    <6>scsi2 : sata_sil
    <6>ata3: SATA link down (SStatus 0 SControl 310)
    <6>scsi3 : sata_sil
    <6>ata4: SATA link down (SStatus 0 SControl 310)
    <6>ATIIXP: IDE controller at PCI slot 0000:00:14.1
    <6>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
    <6>ATIIXP: chipset revision 128
    <6>ATIIXP: not 100% native mode: will probe irqs later
    <6> ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hdaMA, hdbio
    <6> ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdcMA, hddio
    <7>Probing IDE interface ide0...
    <4>hda: SAMSUNG SP0802N, ATA DISK drive
    <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    <6>hda: max request size: 512KiB
    <6>hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
    <6>hda: cache flushes supported
    <6> hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > hda4
    <7>Probing IDE interface ide1...
    <4>hdc: HL-DT-ST DVDRAM GSA-H10A, ATAPI CD/DVD-ROM drive
    <4>ide1 at 0x170-0x177,0x376 on irq 15
    <6>ACPI: Processor [CPU0] (supports 8 throttling states)
    <6>ACPI: Processor [CPU1] (supports 8 throttling states)
    <4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
    <3>ACPI: Getting cpuindex for acpiid 0x3
    <4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
    <3>ACPI: Getting cpuindex for acpiid 0x4
    <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
    <6>SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
    <6>SGI XFS Quota Management subsystem
    <4>Attempting manual resume
    <5>XFS mounting filesystem hda2
    <7>Ending clean XFS mount for filesystem: hda2
    <6>parport: PnPBIOS parport detected.
    <6>parport0: PC-style at 0x378 (0x778), irq 7, dma 4 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    <4>parport0: dma 4 in use, resorting to PIO operation
    <6>lp0: using parport0 (interrupt-driven).
    <6>Linux agpgart interface v0.101 (c) Dave Jones
    <6>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
    <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    <6>hdc: ATAPI 79X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
    <6>Uniform CD-ROM driver Revision: 3.20
    <6>usbcore: registered new driver usbfs
    <6>usbcore: registered new driver hub
    <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    <6>8139too Fast Ethernet driver 0.9.27
    <6>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 21 (level, low) -> IRQ 169
    <6>eth0: RealTek RTL8139 at 0xf952e000, 00:16:76:6e:a3:1f, IRQ 169
    <7>eth0: Identified 8139 chip type 'RTL-8101'
    <4>PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
    <6>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 201
    <6>ehci_hcd 0000:00:13.2: EHCI Host Controller
    <6>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
    <6>ehci_hcd 0000:00:13.2: irq 201, io mem 0x60206000
    <6>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    <6>usb usb1: new device found, idVendor=0000, idProduct=0000
    <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    <6>usb usb1: Product: EHCI Host Controller
    <6>usb usb1: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd
    <6>usb usb1: SerialNumber: 0000:00:13.2
    <6>usb usb1: configuration #1 chosen from 1 choice
    <6>hub 1-0:1.0: USB hub found
    <6>hub 1-0:1.0: 8 ports detected
    <7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    <4>PCI: Enabling device 0000:00:13.0 (0000 -> 0002)
    <6>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 201
    <6>ohci_hcd 0000:00:13.0: OHCI Host Controller
    <6>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
    <6>ohci_hcd 0000:00:13.0: irq 201, io mem 0x60204000
    <6>usb usb2: new device found, idVendor=0000, idProduct=0000
    <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    <6>usb usb2: Product: OHCI Host Controller
    <6>usb usb2: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd
    <6>usb usb2: SerialNumber: 0000:00:13.0
    <6>usb usb2: configuration #1 chosen from 1 choice
    <6>hub 2-0:1.0: USB hub found
    <6>hub 2-0:1.0: 4 ports detected
    <4>PCI: Enabling device 0000:00:13.1 (0000 -> 0002)
    <6>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 201
    <6>ohci_hcd 0000:00:13.1: OHCI Host Controller
    <6>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
    <6>ohci_hcd 0000:00:13.1: irq 201, io mem 0x60205000
    <6>usb usb3: new device found, idVendor=0000, idProduct=0000
    <6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    <6>usb usb3: Product: OHCI Host Controller
    <6>usb usb3: Manufacturer: Linux 2.6.18.2-34-default ohci_hcd
    <6>usb usb3: SerialNumber: 0000:00:13.1
    <6>usb usb3: configuration #1 chosen from 1 choice
    <6>hub 3-0:1.0: USB hub found
    <6>hub 3-0:1.0: 4 ports detected
    <6>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 193
    <6>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
    <7>ALSA sound/pci/hda/hda_codec.c:2117: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
    <7>ALSA sound/pci/hda/hda_codec.c:2121: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    <7>ALSA sound/pci/hda/hda_codec.c:2123: hp=0x1b, dig_out=0x0, din_in=0x0
    <7>ALSA sound/pci/hda/hda_codec.c:2131: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0
    <6>Adding 3807396k swap on /dev/hda4. Priority:-1 extents:1 across:3807396k
    <6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
    <6>loop: loaded (max 8 devices)
    <5>XFS mounting filesystem hda7
    <7>Ending clean XFS mount for filesystem: hda7
    <6>AppArmor: AppArmor initialized
    <5>audit(1178221975.861:2): AppArmor initialized
    <4>
    Kernel logging (ksyslog) stopped.
    Kernel log daemon terminating.

    Boot logging started on /dev/tty1(/dev/console) at Thu May 3 19:52:41 2007

    Trying manual resume from /dev/hda4
    Creating device nodes with udev
    Loading ide-core
    Loading ide-disk
    Loading scsi_mod
    Loading sd_mod
    Loading libata
    Loading sata_sil
    Loading atiixp
    Loading processor
    Loading thermal
    Loading fan
    Loading edd
    Loading xfs
    Invoking userspace resume from /dev/hda4
    resume: Could not stat configuration file
    resume: libgcrypt version: 1.2.3
    resume: Could not read the image
    Invoking in-kernel resume from /dev/hda4
    Waiting for device /dev/hda2 to appear: ok
    fsck 1.39 (29-May-2006)
    [/bin/fsck.xfs (1) -- /] fsck.xfs -a /dev/hda2
    /bin/fsck.xfs: XFS file system.
    fsck succeeded. Mounting root device read-write.
    Mounting root /dev/hda2

    Boot logging started on /dev/tty1(/dev/console (deleted)) at Thu May 3 15:52:48 2007

    boot.udev start
    Starting udevd done
    'boot.udev start' exits with status 0
    boot.rootfsck start
    Activating swap-devices in /etc/fstab...
    done'boot.rootfsck start' exits with status 0
    boot.loadmodules start
    Loading required kernel modules
    done'boot.loadmodules start' exits with status 0
    boot.preload_early start
    done
    'boot.preload_early start' exits with status 0
    boot.scpm start
    'boot.scpm start' exits with status 0
    boot.device-mapper start
    Activating device mapper...
    done
    'boot.device-mapper start' exits with status 0
    boot.md start
    Starting MD Raid done
    'boot.md start' exits with status 0
    boot.lvm start
    Waiting for udev to settle...
    Scanning for LVM volume groups...
    Reading all physical volumes. This may take a while...
    No volume groups found
    No volume groups found
    Activating LVM volume groups...
    No volume groups found
    done
    'boot.lvm start' exits with status 0
    boot.localfs start
    Checking file systems...
    fsck 1.39 (29-May-2006)
    /sbin/fsck.xfs: XFS file system.
    donedone
    Mounting local file systems...
    proc on /proc type proc (rw)
    sysfs on /sys type sysfs (rw)
    debugfs on /sys/kernel/debug type debugfs (rw)
    udev on /dev type tmpfs (rw)
    devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
    /dev/hda1 on /windows/C type vfat (rw,nosuid,nodev)
    /dev/hda5 on /windows/D type vfat (rw,nosuid,nodev)
    /dev/hda6 on /windows/E type vfat (rw,nosuid,nodev)
    /dev/hda8 on /windows/F type vfat (rw,nosuid,nodev)
    /dev/hda7 on /home type xfs (rw)
    done'boot.localfs start' exits with status 0
    boot.apparmor start
    Loading AppArmor module done
    Mounting securityfs on /sys/kernel/security done
    Loading AppArmor profiles done
    'boot.apparmor start' exits with status 0
    boot.cleanup start
    'boot.cleanup start' exits with status 0
    boot.clock start
    Setting up the hardware clockdone
    'boot.clock start' exits with status 0
    boot.klog start
    Creating /var/log/boot.msg
    donekillproc: kill(877,29)
    'boot.klog start' exits with status 0
    boot.proc start
    'boot.proc start' exits with status 0
    boot.sysctl start
    Setting current sysctl status from /etc/sysctl.conf
    net.ipv4.icmp_echo_ignore_broadcasts = 1
    net.ipv4.conf.all.rp_filter = 1
    done
    'boot.sysctl start' exits with status 0
    boot.udev_retry start
    'boot.udev_retry start' exits with status 0
    boot.videobios start
    'boot.videobios start' exits with status 0
    boot.crypto start
    'boot.crypto start' exits with status 0
    boot.ipconfig start
    Enabling syn flood protectiondone
    Disabling IP forwardingdone
    done
    'boot.ipconfig start' exits with status 0
    boot.localnet start
    Setting up hostname 'linux-machine'done
    Setting up loopback interface lo
    lo IP address: 127.0.0.1/8
    done
    'boot.localnet start' exits with status 0
    boot.preload start
    done
    'boot.preload start' exits with status 0
    boot.swap start
    Activating remaining swap-devices in /etc/fstab...
    done'boot.swap start' exits with status 0
    SuSEfirewall2_init start
    Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    done
    'SuSEfirewall2_init start' exits with status 0
    boot.ldconfig start
    'boot.ldconfig start' exits with status 0
    System Boot Control: The system has been set up
    System Boot Control: Running /etc/init.d/boot.local
    donekillproc: kill(877,3)

    INIT:
    Boot logging started on /dev/tty1(/dev/console) at Thu May 3 19:53:06 2007

    Master Resource Control: previous runlevel: N, switching to runlevel: 5
    Loading AppArmor profiles - AppArmor already loaded with profiles.skipped
    Entering runlevel: 5


    ], [ CONSOLE=/ddone
    startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ngev/console ROOTFS_FSTYPE=xfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
    startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
    startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/klogd ]
    Starting syslog servicesdone
    startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/acpid ]
    Starting irqbalance unused
    startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
    acpid: loading ACPI modules ( ac battery button ) done
    acpid: will not skip unsupported modules
    acpid: loading ACPI laptop modules ( ) done
    Starting acpid done
    Initializing random number generatordone
    Starting resource managerdone
    Starting D-Bus daemondone
    Unknown group "netdev" in message bus configuration file
    startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ]
    Starting PolicyKit daemondone
    startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
    Loading keymap i386/qwerty/es.map.gz
    doneLoading compose table latin1.adddone
    Start Unicode mode
    doneLoading console font lat9w-16.psfu -m trivial G0:loadable
    doneStarting HAL daemondone
    Loading CPUFreq modules (CPUFreq not supported)
    Setting up network interfaces:
    lo
    lo IP address: 127.0.0.1/8
    done eth0 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    eth0 configuration: eth-id-00:16:76:6e:a3:1f
    eth0 (DHCP) . . killproc: kill(2449,20)
    killproc: kill(2445,1)
    killproc: kill(2449,18)
    killproc: kill(2449,12)
    IP/Netmask: 192.168.0.21 / 255.255.255.0
    doneSetting up service network . . . . . . . . . . . . . . . .done
    startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
    Starting mdnsddone
    Mount SMB/ CIFS File Systems unused
    startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/portmap ]
    Starting RPC portmap daemondone
    Importing Net File System (NFS)unused
    Starting nfsboot (sm-notify) done
    startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/auditd ]
    startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
    Checking/updating CPU microcode done
    Starting cupsddone
    startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
    Starting Name Service Cache Daemondone
    startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
    Starting auditd done
    Starting SSH daemondone
    Starting ZENworks Management Daemondone
    startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
    Starting powersaved: done
    Starting VMware services:
    Virtual machine monitor done
    Virtual ethernet done
    Bridged networking on /dev/vmnet0 done
    Host-only networking on /dev/vmnet1 (background) done
    Host-only networking on /dev/vmnet2 (background) done
    Host-only networking on /dev/vmnet8 (background) done
    NAT service on /dev/vmnet8 done
    Starting mail service (Postfix)done
    startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
    Starting CRON daemondone
    Starting service gdmstartproc: execve (/opt/gnome/sbin/gdm) [ /opt/gnome/sbin/gdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=xfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg LANG=es_ES.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=Industrial WINDOWMANAGER=/usr/bin/gnome splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/opt/gnome/sbin/gdm ]
    done
    Starting atieventsddone
    Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
    done
    Master Resource Control: runlevel 5 has been reached
    Skipped services in runlevel 5: irq_balancer smbfs nfs
    killproc: kill(2334,3)

  4. #4
    Fecha de Ingreso
    07-febrero-2007
    Ubicación
    Ourense
    Mensajes
    8.609
    Post Thanks / Like
    Poder de Credibilidad
    22
    Hola!!

    Por lo que dices en el post, el problema está al inicar el modo gráfico. Podemos probar varias cosas. Te adelanto que el registro de inicio gráfico también está en /var/log y que quizás convenga echarle un ojo...

    Puedes probar varias cosas:

    1. Intentar cerrar el modo gráfico (cerrar sessión->iniciar sesión consola si lo tienes configurado así, o ejecutando init 3 como usuario root)
    2. Intentar volver a iniciarlo (bien con xinit o startx o ejecutando como root init 5; yo prefiero intentar iniciar con xinit, es más rápido: comprueba que puede iniciar una sesión gráfica e inicia un terminal, nada más. Se cierra esa sesión escribiendo exit en el terminal. Hay que tener el foco en el terminal posando el puntero del mouse en su ventana...)
    3. Quizás intentar reconfigurar el sistema con sax2 o puede que el problema sea simplemente de kde. Puedes borrar sus archivos de configuración si no tienes ninguna configuración en kde que quieras guardar, o simplemente cambiarle el nombre e iniciar una nueva sesión kde...
    4. Si fuese el kde, podrías borrar el socket que tiene en /tmp (también puedes aprovechar para eliminar el contenido de /tmp)
    5. Si tengo que elegir, apuesto por un fallo de configuración del servidor gráfico. Tiene aspecto de ser un inicio erróneo y luego un reinicio del servidor... no sé, mira los archivos de registro de /var/log del entorno gráfico. Si tal postealos aquí...

    Salud!!

  5. #5
    Fecha de Ingreso
    24-abril-2007
    Mensajes
    13
    Post Thanks / Like
    Poder de Credibilidad
    0
    He hecho lo que mas dicho y no he encontrado nada.... nada q pueda identificar yo por lo menos... aki estás el log que me pides...


    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.

    X Window System Version 7.1.99.902 (7.2.0 RC 2)
    Release Date: 13 November 2006
    X Protocol Version 11, Revision 0, Release 7.1.99.902
    Build Operating System: openSUSE SUSE LINUX
    Current Operating System: Linux linux-machine 2.6.18.2-34-default #1 SMP Mon Nov 27 11:46:27 UTC 2006 i686
    Build Date: 28 November 2006
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 3 20:53:39 2007
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Layout[all]"
    (**) |-->Screen "Screen[0]" (0)
    (**) | |-->Monitor "Monitor[0]"
    (**) | |-->Device "Device[0]"
    (**) |-->Input Device "Keyboard[0]"
    (**) |-->Input Device "Mouse[1]"
    (WW) The directory "/usr/share/fonts/local" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latin2/misc" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latin2/75dpi" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latin2/100dpi" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latin2/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latin7/75dpi" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/baekmuk" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/japanese" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/kwintv" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ucs/misc" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ucs/75dpi" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ucs/100dpi" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/hellas/misc" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/hellas/75dpi" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/hellas/100dpi" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/hellas/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/xtest" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/Type1,
    /usr/share/fonts/URW,
    /usr/share/fonts/Speedo,
    /usr/share/fonts/cyrillic,
    /usr/share/fonts/truetype,
    /usr/share/fonts/uni:unscaled,
    /opt/kde3/share/fonts,
    unix/:7100
    (==) RgbPath set to "/usr/share/X11/rgb"
    (**) Input device list set to "/dev/gpmdata,/dev/input/mice"
    (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
    (**) Option "AllowMouseOpenFail" "on"
    (**) Option "Xinerama" "off"
    (**) Option "IgnoreABI" "on"
    (**) Ignoring ABI Version
    (**) Extension "DAMAGE" is disabled
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81c55c0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.0
    X.Org XInput driver : 0.6
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.0
    (++) using VT number 7

    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1002,5a33 card 8086,d601 rev 01 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 1002,5a3f card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:11:0: chip 1002,437a card 8086,d601 rev 80 class 01,01,8f hdr 00
    (II) PCI: 00:12:0: chip 1002,4379 card 8086,d601 rev 80 class 01,01,8f hdr 00
    (II) PCI: 00:13:0: chip 1002,4374 card 8086,d601 rev 80 class 0c,03,10 hdr 80
    (II) PCI: 00:13:1: chip 1002,4375 card 8086,d601 rev 80 class 0c,03,10 hdr 00
    (II) PCI: 00:13:2: chip 1002,4373 card 8086,d601 rev 80 class 0c,03,20 hdr 00
    (II) PCI: 00:14:0: chip 1002,4372 card 8086,d601 rev 81 class 0c,05,00 hdr 80
    (II) PCI: 00:14:1: chip 1002,4376 card 8086,d601 rev 80 class 01,01,8a hdr 00
    (II) PCI: 00:14:2: chip 1002,437b card 8086,d601 rev 01 class 04,03,00 hdr 00
    (II) PCI: 00:14:3: chip 1002,4377 card 8086,d601 rev 80 class 06,01,00 hdr 80
    (II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 80 class 06,04,01 hdr 81
    (II) PCI: 01:05:0: chip 1002,5a61 card 8086,d601 rev 00 class 03,00,00 hdr 00
    (II) PCI: 02:02:0: chip 10ec,8139 card 8086,d601 rev 10 class 02,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x00002000 - 0x00002fff (0x1000) IX[B]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0x60100000 - 0x601fffff (0x100000) MX[B]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0x40000000 - 0x5fffffff (0x20000000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:20:4), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [1] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
    [2] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
    [3] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0x60000000 - 0x600fffff (0x100000) MX[B]
    (--) PCI:*(1:5:0) ATI Technologies Inc RC410 [Radeon Xpress 200] rev 0, Mem @ 0x40000000/28, 0x60100000/16, I/O @ 0x2000/8
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) Active PCI resource ranges:
    [0] -1 0 0x60000000 - 0x600000ff (0x100) MX[B]
    [1] -1 0 0x60200000 - 0x60203fff (0x4000) MX[B]
    [2] -1 0 0x60207000 - 0x602073ff (0x400) MX[B]
    [3] -1 0 0x60206000 - 0x60206fff (0x1000) MX[B]
    [4] -1 0 0x60205000 - 0x60205fff (0x1000) MX[B]
    [5] -1 0 0x60204000 - 0x60204fff (0x1000) MX[B]
    [6] -1 0 0x60207400 - 0x602075ff (0x200) MX[B]
    [7] -1 0 0x60207600 - 0x602077ff (0x200) MX[B]
    [8] -1 0 0x60100000 - 0x6010ffff (0x10000) MX[B](B)
    [9] -1 0 0x40000000 - 0x4fffffff (0x10000000) MX[B](B)
    [10] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [11] -1 0 0x00003000 - 0x0000300f (0x10) IX[B]
    [12] -1 0 0x00003010 - 0x0000301f (0x10) IX[B]
    [13] -1 0 0x00003020 - 0x0000302f (0x10) IX[B]
    [14] -1 0 0x00003078 - 0x0000307b (0x4) IX[B]
    [15] -1 0 0x00003050 - 0x00003057 (0x8) IX[B]
    [16] -1 0 0x0000307c - 0x0000307f (0x4) IX[B]
    [17] -1 0 0x00003058 - 0x0000305f (0x8) IX[B]
    [18] -1 0 0x00003030 - 0x0000303f (0x10) IX[B]
    [19] -1 0 0x00003080 - 0x00003083 (0x4) IX[B]
    [20] -1 0 0x00003060 - 0x00003067 (0x8) IX[B]
    [21] -1 0 0x00003084 - 0x00003087 (0x4) IX[B]
    [22] -1 0 0x00003068 - 0x0000306f (0x8) IX[B]
    [23] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0x60000000 - 0x600000ff (0x100) MX[B]
    [1] -1 0 0x60200000 - 0x60203fff (0x4000) MX[B]
    [2] -1 0 0x60207000 - 0x602073ff (0x400) MX[B]
    [3] -1 0 0x60206000 - 0x60206fff (0x1000) MX[B]
    [4] -1 0 0x60205000 - 0x60205fff (0x1000) MX[B]
    [5] -1 0 0x60204000 - 0x60204fff (0x1000) MX[B]
    [6] -1 0 0x60207400 - 0x602075ff (0x200) MX[B]
    [7] -1 0 0x60207600 - 0x602077ff (0x200) MX[B]
    [8] -1 0 0x60100000 - 0x6010ffff (0x10000) MX[B](B)
    [9] -1 0 0x40000000 - 0x4fffffff (0x10000000) MX[B](B)
    [10] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [11] -1 0 0x00003000 - 0x0000300f (0x10) IX[B]
    [12] -1 0 0x00003010 - 0x0000301f (0x10) IX[B]
    [13] -1 0 0x00003020 - 0x0000302f (0x10) IX[B]
    [14] -1 0 0x00003078 - 0x0000307b (0x4) IX[B]
    [15] -1 0 0x00003050 - 0x00003057 (0x8) IX[B]
    [16] -1 0 0x0000307c - 0x0000307f (0x4) IX[B]
    [17] -1 0 0x00003058 - 0x0000305f (0x8) IX[B]
    [18] -1 0 0x00003030 - 0x0000303f (0x10) IX[B]
    [19] -1 0 0x00003080 - 0x00003083 (0x4) IX[B]
    [20] -1 0 0x00003060 - 0x00003067 (0x8) IX[B]
    [21] -1 0 0x00003084 - 0x00003087 (0x4) IX[B]
    [22] -1 0 0x00003068 - 0x0000306f (0x8) IX[B]
    [23] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x60000000 - 0x600000ff (0x100) MX[B]
    [5] -1 0 0x60200000 - 0x60203fff (0x4000) MX[B]
    [6] -1 0 0x60207000 - 0x602073ff (0x400) MX[B]
    [7] -1 0 0x60206000 - 0x60206fff (0x1000) MX[B]
    [8] -1 0 0x60205000 - 0x60205fff (0x1000) MX[B]
    [9] -1 0 0x60204000 - 0x60204fff (0x1000) MX[B]
    [10] -1 0 0x60207400 - 0x602075ff (0x200) MX[B]
    [11] -1 0 0x60207600 - 0x602077ff (0x200) MX[B]
    [12] -1 0 0x60100000 - 0x6010ffff (0x10000) MX[B](B)
    [13] -1 0 0x40000000 - 0x4fffffff (0x10000000) MX[B](B)
    [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [16] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [17] -1 0 0x00003000 - 0x0000300f (0x10) IX[B]
    [18] -1 0 0x00003010 - 0x0000301f (0x10) IX[B]
    [19] -1 0 0x00003020 - 0x0000302f (0x10) IX[B]
    [20] -1 0 0x00003078 - 0x0000307b (0x4) IX[B]
    [21] -1 0 0x00003050 - 0x00003057 (0x8) IX[B]
    [22] -1 0 0x0000307c - 0x0000307f (0x4) IX[B]
    [23] -1 0 0x00003058 - 0x0000305f (0x8) IX[B]
    [24] -1 0 0x00003030 - 0x0000303f (0x10) IX[B]
    [25] -1 0 0x00003080 - 0x00003083 (0x4) IX[B]
    [26] -1 0 0x00003060 - 0x00003067 (0x8) IX[B]
    [27] -1 0 0x00003084 - 0x00003087 (0x4) IX[B]
    [28] -1 0 0x00003068 - 0x0000306f (0x8) IX[B]
    [29] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
    (II) Module type1: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Type1
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 7.1.99.902, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "v4l"
    (II) Loading /usr/lib/xorg/modules/drivers//v4l_drv.so
    (II) Module v4l: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 0.1.1
    ABI class: X.Org Video Driver, version 1.0
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading sub module "drm"
    (II) LoadModule: "drm"
    (II) Loading /usr/lib/xorg/modules/linux//libdrm.so
    (II) Module drm: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.36.5
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 1.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.6
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.1.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.6
    (II) v4l driver for Video4Linux
    (II) Primary Device is: PCI 01:05:0
    (II) ATI Proprietary Linux Driver Version Identifier:8.36.5
    (II) ATI Proprietary Linux Driver Release Identifier: LGDr8.36g1
    (II) ATI Proprietary Linux Driver Build Date: Apr 17 2007 10:04:24
    (II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.36.1.1.2.3-driver-lnx-x86-x86_64-338188
    (--) Chipset Supported AMD Graphics Processor (0x5A61) found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x60000000 - 0x600000ff (0x100) MX[B]
    [5] -1 0 0x60200000 - 0x60203fff (0x4000) MX[B]
    [6] -1 0 0x60207000 - 0x602073ff (0x400) MX[B]
    [7] -1 0 0x60206000 - 0x60206fff (0x1000) MX[B]
    [8] -1 0 0x60205000 - 0x60205fff (0x1000) MX[B]
    [9] -1 0 0x60204000 - 0x60204fff (0x1000) MX[B]
    [10] -1 0 0x60207400 - 0x602075ff (0x200) MX[B]
    [11] -1 0 0x60207600 - 0x602077ff (0x200) MX[B]
    [12] -1 0 0x60100000 - 0x6010ffff (0x10000) MX[B](B)
    [13] -1 0 0x40000000 - 0x4fffffff (0x10000000) MX[B](B)
    [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [16] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [17] -1 0 0x00003000 - 0x0000300f (0x10) IX[B]
    [18] -1 0 0x00003010 - 0x0000301f (0x10) IX[B]
    [19] -1 0 0x00003020 - 0x0000302f (0x10) IX[B]
    [20] -1 0 0x00003078 - 0x0000307b (0x4) IX[B]
    [21] -1 0 0x00003050 - 0x00003057 (0x8) IX[B]
    [22] -1 0 0x0000307c - 0x0000307f (0x4) IX[B]
    [23] -1 0 0x00003058 - 0x0000305f (0x8) IX[B]
    [24] -1 0 0x00003030 - 0x0000303f (0x10) IX[B]
    [25] -1 0 0x00003080 - 0x00003083 (0x4) IX[B]
    [26] -1 0 0x00003060 - 0x00003067 (0x8) IX[B]
    [27] -1 0 0x00003084 - 0x00003087 (0x4) IX[B]
    [28] -1 0 0x00003068 - 0x0000306f (0x8) IX[B]
    [29] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
    (II) fglrx(0): pEnt->device->identifier=0x81e1930
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x60000000 - 0x600000ff (0x100) MX[B]
    [5] -1 0 0x60200000 - 0x60203fff (0x4000) MX[B]
    [6] -1 0 0x60207000 - 0x602073ff (0x400) MX[B]
    [7] -1 0 0x60206000 - 0x60206fff (0x1000) MX[B]
    [8] -1 0 0x60205000 - 0x60205fff (0x1000) MX[B]
    [9] -1 0 0x60204000 - 0x60204fff (0x1000) MX[B]
    [10] -1 0 0x60207400 - 0x602075ff (0x200) MX[B]
    [11] -1 0 0x60207600 - 0x602077ff (0x200) MX[B]
    [12] -1 0 0x60100000 - 0x6010ffff (0x10000) MX[B](B)
    [13] -1 0 0x40000000 - 0x4fffffff (0x10000000) MX[B](B)
    [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
    [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
    [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [19] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [20] -1 0 0x00003000 - 0x0000300f (0x10) IX[B]
    [21] -1 0 0x00003010 - 0x0000301f (0x10) IX[B]
    [22] -1 0 0x00003020 - 0x0000302f (0x10) IX[B]
    [23] -1 0 0x00003078 - 0x0000307b (0x4) IX[B]
    [24] -1 0 0x00003050 - 0x00003057 (0x8) IX[B]
    [25] -1 0 0x0000307c - 0x0000307f (0x4) IX[B]
    [26] -1 0 0x00003058 - 0x0000305f (0x8) IX[B]
    [27] -1 0 0x00003030 - 0x0000303f (0x10) IX[B]
    [28] -1 0 0x00003080 - 0x00003083 (0x4) IX[B]
    [29] -1 0 0x00003060 - 0x00003067 (0x8) IX[B]
    [30] -1 0 0x00003084 - 0x00003087 (0x4) IX[B]
    [31] -1 0 0x00003068 - 0x0000306f (0x8) IX[B]
    [32] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
    [33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
    [34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin, [x]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.0
    (II) fglrx(0): PCI bus 1 card 5 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "NoAccel" "no"
    (**) fglrx(0): Option "NoDRI" "no"
    (**) fglrx(0): Option "Capabilities" "0x00000000"
    (**) fglrx(0): Option "CapabilitiesEx" "0x00000000"
    (**) fglrx(0): Option "KernelModuleParm" "locked-userpages=0"
    (**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
    (**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
    (**) fglrx(0): Option "OpenGLOverlay" "off"
    (**) fglrx(0): Option "VideoOverlay" "on"
    (**) fglrx(0): Option "ScreenOverlap" "0"
    (**) fglrx(0): Option "UseInternalAGPGART" "no"
    (**) fglrx(0): Option "Stereo" "off"
    (**) fglrx(0): Option "StereoSyncEnable" "1"
    (**) fglrx(0): Option "UseFastTLS" "0"
    (**) fglrx(0): Option "BlockSignalsOnLock" "on"
    (**) fglrx(0): Option "ForceGenericCPU" "no"
    (**) fglrx(0): Option "CenterMode" "off"
    (**) fglrx(0): Option "FSAAScale" "1"
    (**) fglrx(0): Option "FSAAEnable" "no"
    (**) fglrx(0): Option "FSAADisableGamma" "no"
    (**) fglrx(0): Option "FSAACustomizeMSPos" "no"
    (**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
    (**) fglrx(0): Option "PseudoColorVisuals" "off"
    (**) fglrx(0): Option "DPMS"
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (**) fglrx(0): Gamma Correction for I is 0x00000000
    (**) fglrx(0): Gamma Correction for II is 0x00000000
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.0
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (**) fglrx(0): Option "mtrr" "off"
    (--) fglrx(0): Chipset: "ATI Radeon Xpress Series" (Chipset = 0x5a61)
    (--) fglrx(0): (PciSubVendor = 0x8086, PciSubDevice = 0xd601)
    (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0x40000000
    (--) fglrx(0): MMIO registers at 0x60100000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.1.0
    ABI class: X.Org Video Driver, version 1.0
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 2.0
    (II) fglrx(0): VESA VBE Total Mem: 131072 kB
    (II) fglrx(0): VESA VBE OEM: ATI RADEON XPRESS 200 Series
    (II) fglrx(0): VESA VBE OEM Software Rev: 1.0
    (II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: MS4
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmGetBusid returned ''
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.36.5
    ABI class: X.Org Server Extension, version 0.3
    (--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
    (II) fglrx(0): PCIE card detected
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Loading /usr/lib/xorg/modules//libddc.so
    (II) Module ddc: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.0
    (II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: SAM Model: 117 Serial#: 1279406391
    (II) fglrx(0): Year: 2006 Week: 12
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    (II) fglrx(0): Sync: Separate
    (II) fglrx(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
    (II) fglrx(0): Default color space is primary color space
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    (II) fglrx(0): Supported VESA Video Modes:
    (II) fglrx(0): 720x400@70Hz
    (II) fglrx(0): 640x480@60Hz
    (II) fglrx(0): 640x480@67Hz
    (II) fglrx(0): 640x480@72Hz
    (II) fglrx(0): 640x480@75Hz
    (II) fglrx(0): 800x600@56Hz
    (II) fglrx(0): 800x600@60Hz
    (II) fglrx(0): 800x600@72Hz
    (II) fglrx(0): 800x600@75Hz
    (II) fglrx(0): 832x624@75Hz
    (II) fglrx(0): 1024x768@60Hz
    (II) fglrx(0): 1024x768@70Hz
    (II) fglrx(0): 1024x768@75Hz
    (II) fglrx(0): 1152x870@75Hz
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported Future Video Modes:
    (II) fglrx(0): #0: hsize: 1024 vsize 768 refresh: 85 vid: 22881
    (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
    (II) fglrx(0): #2: hsize: 640 vsize 480 refresh: 85 vid: 22833
    (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 94.5 MHz Image Size: 312 x 234 mm
    (II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
    (II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
    (II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 71 kHz, PixClock max 110 MHz
    (II) fglrx(0): Monitor name: SyncMaster
    (II) fglrx(0): Serial No: H9LL346035
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff004c2d17013731424c
    (II) fglrx(0): 0c100103681f17782eee91a3544c9926
    (II) fglrx(0): 0f5054bfee806159455931598180714f
    (II) fglrx(0): 010101010101ea240060410028303060
    (II) fglrx(0): 130038ea1000001e000000fd0032a01e
    (II) fglrx(0): 470b000a202020202020000000fc0053
    (II) fglrx(0): 796e634d61737465720a2020000000ff
    (II) fglrx(0): 0048394c4c3334363033350a20200028
    (II) fglrx(0): End of Display1 EDID data --------------------
    (II) fglrx(0): Primary Controller - CRT on primary DAC
    (II) fglrx(0): Internal Desktop Setting: 0x00000008
    (II) fglrx(0): POWERplay version 3. 1 power state available:
    (II) fglrx(0): 1. 301/133MHz @ 50Hz [enable load balancing]
    (**) fglrx(0): Qbs disabled
    (==) fglrx(0): FAST_SWAP disabled
    (**) fglrx(0): PseudoColor visuals disabled
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) fglrx(0): Center Mode is disabled
    (==) fglrx(0): TMDS coherent mode is enabled
    (II) fglrx(0): Total of 29 modes found for primary display.
    (--) fglrx(0): Virtual size is 1024x768 (pitch 0)
    (**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
    (II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
    (**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
    (**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
    (**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
    (**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
    (**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
    (II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
    (**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
    (**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
    (**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
    (**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
    (**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
    (II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
    (**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
    (II) fglrx(0): Modeline "800x600" 68.17 800 848 936 1072 600 601 604 636 +hsync
    (**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
    (II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 +hsync
    (**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
    (II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 +hsync +vsync
    (**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
    (**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
    (**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
    (**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
    (II) fglrx(0): Modeline "640x480" 52.40 640 680 744 848 480 481 484 515 +hsync
    (**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
    (II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484 509 +hsync
    (**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
    (II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 +hsync
    (**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
    (**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
    (**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
    (**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
    (**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
    (**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
    (**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
    (**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
    (**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
    (**) fglrx(0): Display dimensions: (345, 259) mm
    (WW) fglrx(0): Probed monitor is 310x230 mm, using Displaysize 345x259 mm
    (**) fglrx(0): DPI set to (75, 75)
    (--) fglrx(0): Virtual size is 1024x768 (pitch 1024)
    (**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
    (II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
    (**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
    (**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
    (**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
    (**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
    (**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
    (II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
    (**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
    (**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
    (**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
    (**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
    (**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
    (II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
    (**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
    (II) fglrx(0): Modeline "800x600" 68.17 800 848 936 1072 600 601 604 636 +hsync
    (**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
    (II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 +hsync
    (**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
    (II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 +hsync +vsync
    (**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
    (**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
    (**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
    (**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
    (II) fglrx(0): Modeline "640x480" 52.40 640 680 744 848 480 481 484 515 +hsync
    (**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
    (II) fglrx(0): Modeline "640x480" 43.16 640 680 744 848 480 481 484 509 +hsync
    (**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
    (II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 +hsync
    (**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
    (**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
    (**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
    (**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
    (**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
    (**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
    (**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
    (**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
    (**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/lib/xorg/modules//libramdac.so
    (II) Module ramdac: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.0
    (**) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.2.0
    ABI class: X.Org Video Driver, version 1.0
    (==) fglrx(0): HPV inactive
    (==) fglrx(0): FSAA enabled: NO
    (**) fglrx(0): FSAA Gamma enabled
    (**) fglrx(0): FSAA Multisample Position is fix
    (**) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) fglrx(0): Depth moves disabled by default
    (**) fglrx(0): Capabilities: 0x00000000
    (**) fglrx(0): CapabilitiesEx: 0x00000000
    (**) fglrx(0): cpuFlags: 0x8000001d
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (**) fglrx(0): KernelModuleParm: "locked-userpages=0"
    (**) fglrx(0): ATI GART size: 128 MB
    (II) fglrx(0): [pcie] 126976 kB allocated with handle 0xdeadbeef
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (**) fglrx(0): UseFastTLS=0
    (**) fglrx(0): BlockSignalsOnLock=1
    (==) fglrx(0): EnablePrivateBackZ = NO
    (II) LoadModule: "glesx.so" (glesx)
    (WW) LoadModule: given non-canonical module name "glesx.so"
    (II) Loading /usr/lib/xorg/modules//glesx.so
    (II) Module glesx: vendor="X.Org Foundation"
    compiled for 7.1.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension GLESX
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0x60100000 - 0x6010ffff (0x10000) MX[B]
    [1] 0 0 0x40000000 - 0x4fffffff (0x10000000) MX[B]
    [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [6] -1 0 0x60000000 - 0x600000ff (0x100) MX[B]
    [7] -1 0 0x60200000 - 0x60203fff (0x4000) MX[B]
    [8] -1 0 0x60207000 - 0x602073ff (0x400) MX[B]
    [9] -1 0 0x60206000 - 0x60206fff (0x1000) MX[B]
    [10] -1 0 0x60205000 - 0x60205fff (0x1000) MX[B]
    [11] -1 0 0x60204000 - 0x60204fff (0x1000) MX[B]
    [12] -1 0 0x60207400 - 0x602075ff (0x200) MX[B]
    [13] -1 0 0x60207600 - 0x602077ff (0x200) MX[B]
    [14] -1 0 0x60100000 - 0x6010ffff (0x10000) MX[B](B)
    [15] -1 0 0x40000000 - 0x4fffffff (0x10000000) MX[B](B)
    [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
    [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
    [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
    [19] 0 0 0x00002000 - 0x000020ff (0x100) IX[B]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [22] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [23] -1 0 0x00003000 - 0x0000300f (0x10) IX[B]
    [24] -1 0 0x00003010 - 0x0000301f (0x10) IX[B]
    [25] -1 0 0x00003020 - 0x0000302f (0x10) IX[B]
    [26] -1 0 0x00003078 - 0x0000307b (0x4) IX[B]
    [27] -1 0 0x00003050 - 0x00003057 (0x8) IX[B]
    [28] -1 0 0x0000307c - 0x0000307f (0x4) IX[B]
    [29] -1 0 0x00003058 - 0x0000305f (0x8) IX[B]
    [30] -1 0 0x00003030 - 0x0000303f (0x10) IX[B]
    [31] -1 0 0x00003080 - 0x00003083 (0x4) IX[B]
    [32] -1 0 0x00003060 - 0x00003067 (0x8) IX[B]
    [33] -1 0 0x00003084 - 0x00003087 (0x4) IX[B]
    [34] -1 0 0x00003068 - 0x0000306f (0x8) IX[B]
    [35] -1 0 0x00002000 - 0x000020ff (0x100) IX[B](B)
    [36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [37] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
    (II) fglrx(0): detected X.org 7.1.-1.902
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:5:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports
    drmOpenDevice: node name is /dev/dri/card1
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card2
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card3
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card4
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card5
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card6
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card7
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card8
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card9
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card10
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card11
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card12
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card13
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card14
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmGetBusid returned ''
    (II) fglrx(0): [drm] DRM interface version 1.0
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:5:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
    (II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7888000
    (II) fglrx(0): [drm] framebuffer handle = 0x3000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 8.36.5
    (II) fglrx(0): Date: Apr 17 2007
    (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.18.2-34-default
    (II) fglrx(0): Build-Kernel MODVERSIONS: yes
    (II) fglrx(0): Build-Kernel __SMP__: yes
    (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    (II) fglrx(0): [drm] register handle = 0x00004000
    (II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
    (II) fglrx(0): [drm] texture shared area handle = 0x00008000
    (II) fglrx(0): shared FSAAScale=1
    (II) fglrx(0): DRI initialization successfull!
    (II) fglrx(0): FBADPhys: 0x38000000 FBMappedSize: 0x00501000
    (II) fglrx(0): FBMM initialized for area (0,0)-(1024,1281)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 1024 x 513
    (==) fglrx(0): Backing store disabled
    (==) fglrx(0): Silken mouse enabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (**) fglrx(0): DPMS enabled
    (**) fglrx(0): Video overlay enabled on CRTC1
    (II) fglrx(0): GLESX enableFlags = 0
    (II) fglrx(0): GLESX is enabled
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Solid Lines
    Dashed Lines
    Offscreen Pixmaps
    Setting up tile and stipple cache:
    16 128x128 slots
    4 256x256 slots
    (II) fglrx(0): Acceleration enabled
    (WW) fglrx(0): Option "CalcAlgorithm" is not used
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): [DRI] installation complete
    (II) fglrx(0): Direct rendering enabled
    (==) fglrx(0): Using hardware cursor
    (II) fglrx(0): Interrupt handler installed at IRQ 209.
    (II) fglrx(0): Exposed events to the /proc interface
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:5:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports PCI:1:5:0
    (EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
    (EE) AIGLX: reverting to software rendering
    (II) Loading local sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
    (II) Module GLcore: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) GLX: Initialized MESA-PROXY GL provider for screen 0
    (**) Option "CoreKeyboard"
    (**) Keyboard[0]: Core Keyboard
    (**) Option "Protocol" "Standard"
    (**) Keyboard[0]: Protocol: Standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xfree86"
    (**) Keyboard[0]: XkbRules: "xfree86"
    (**) Option "XkbModel" "pc102"
    (**) Keyboard[0]: XkbModel: "pc102"
    (**) Option "XkbLayout" "es"
    (**) Keyboard[0]: XkbLayout: "es"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard[0]: CustomKeycodes disabled
    (**) Option "Protocol" "explorerps/2"
    (**) Mouse[1]: Device: "/dev/input/mice"
    (**) Mouse[1]: Protocol: "explorerps/2"
    (**) Option "CorePointer"
    (**) Mouse[1]: Core Pointer
    (**) Option "Device" "/dev/input/mice"
    (**) Option "Buttons" "5"
    (==) Mouse[1]: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) Mouse[1]: ZAxisMapping: buttons 4 and 5
    (**) Mouse[1]: Buttons: 9
    (II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE)
    (II) XINPUT: Adding extended input device "Keyboard[0]" (type: KEYBOARD)
    (II) Mouse[1]: ps2EnableDataReporting: succeeded
    Could not init font path element /usr/share/fonts/Speedo, removing from list!
    Could not init font path element unix/:7100, removing from list!
    SetClientVersion: 0 9
    SetGrabKeysState - disabled
    SetGrabKeysState - enabled
    SetClientVersion: 0 9
    SetGrabKeysState - disabled
    SetGrabKeysState - enabled
    SetClientVersion: 0 9
    SetGrabKeysState - disabled
    SetGrabKeysState - enabled
    SetClientVersion: 0 9
    SetGrabKeysState - disabled
    SetGrabKeysState - enabled

    muchas gracias amigo eres muy amable!!!!!

  6. #6
    Fecha de Ingreso
    07-febrero-2007
    Ubicación
    Ourense
    Mensajes
    8.609
    Post Thanks / Like
    Poder de Credibilidad
    22
    Hola!

    ¿Probaste a reiniciar el modo gráfico? ¿y a reconfigurarlo? ¿a desactivar el 3D?

    ¿Y qué sucedió en cada caso?

    Yo creo que desactivando el 3D, y reconfigurando el servidor X si es necesario, debiera ser suficiente.

    Salud!!

  7. #7
    Fecha de Ingreso
    19-marzo-2005
    Ubicación
    En un lugar del planeta Tierra
    Mensajes
    17.376
    Post Thanks / Like
    Poder de Credibilidad
    10
    (EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/dri/fglrx_dri.so: undefined symbol: __driCreateNewScreen_20050727)
    (EE) AIGLX: reverting to software rendering
    Este es el error, buscarlo en el mejor foro de ATI sobre Linux: www.rage3d.com/board
    NORMAS A CUMPLIR EN LOS FOROS (Lectura obligatoria) Lo siento, no contesto privados sobre problemas con GNU/Linux.
    Síguenos en TWITTER y en FACEBOOK
    Código:
    Buscador de   Alojamiento      Alojamiento     Otros
     paquetes:    de imágenes:     de ficheros:    buscadores:
    Search        TinyPic          Ifile Wuala     Simple y Facil
    Webpinstant   Paste Suse       SendSpace       TextSnip  Cl1p

  8. #8
    kaeltas Invitado
    hola amigo mira ami tambien se me ponia lento super lento al iniciar y ese problema se soluciona activando el 3d en el sax2

    saludos!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Temas Similares

  1. Respuestas: 4
    Último mensaje: 27-dic-2006, 02:04
  2. no me carga suse al arrancar
    By kiko in forum General OpenSUSE
    Respuestas: 0
    Último mensaje: 25-dic-2006, 21:06
  3. Arrancar interfaz grafico
    By jamesdidier in forum Escritorios: KDE, Gnome, otros...
    Respuestas: 2
    Último mensaje: 25-dic-2006, 02:31
  4. Respuestas: 10
    Último mensaje: 10-may-2005, 23:33
  5. Que Susto!! Pero que Bueno el SUSE
    By Goltnor in forum La cafetería
    Respuestas: 7
    Último mensaje: 19-mar-2005, 11:18

Marcadores

Normas de Publicación

  • No puedes crear nuevos temas
  • No puedes responder mensajes
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •