Registrarse
Home
Foros
Miembros
Calendario
Normas
Ayuda

Foros de usuarios de openSUSE
Retroceder   ForoSUSE > Zona Software > General OpenSUSE


Síguenos en Twitter Suscríbete a nuestras noticias Acompáñanos en Facebook

Respuesta
 
Herramientas Desplegado

No Inicia openSUSE al habiltar AMD Dual Graphics
  #1  
Antiguo 12-jun-2015, 18:59
Avatar de zorro_87
zorro_87 zorro_87 está desconectado
Aforado
 
Fecha de Ingreso: 18-noviembre-2010
Ubicación: Venezuela
Versión: Leap 42.1
Mensajes: 44
Agradecimientos: 9
Agradecido 1 Vez en 1 Mensaje
Poder de Credibilidad: 0
zorro_87 está en el buen camino
No Inicia openSUSE al habiltar AMD Dual Graphics

Buen día a todos los usuarios de forosuse, tengo una duda con respecto a la Tecnología de Gráficos dobles AMD Radeon o AMD Dual Graphics Technology, el asunto es el siguiente, tengo configurada la Bios para que haga la función de Dual Graphics, tengo un sistema dual en mi Computadora de sobre mesa osea openSUSE 13.1 y windows 7, cuando ingreso a openSUSE con la configuración que hice en la Bios empieza a cargar el sistema pero este se queda trabado en la pantalla del camaleon y no sigue. En cambio al ingresar a Windows 7 la configuración que hice en la Bios si hace funcionar el AMD Dual Graphics y me permite habilitar desde el programa de AMD Catalyst Control Center la opción de Crossfire. Alguien me puede decir si ha hecho funcionar el AMD Dual Graphics en openSUSE. Ya tengo instalado el AMD Catalyst Control Center en openSUSE.

amd dual graphics.png

Información de mi Equipo:
Sistema openSUSE Leap 42.1 64 Bits
Tarjeta madre ASUS F1A75M_LE
Procesador AMD A4-3400 APU 2.7 Ghz
Tarjeta Gráfica ASUS HD 6450 1GB
Memoria Ram 4GB

De ante mano muchas gracias y espero poder recibir alguna solución de los usuarios de esta gran comunidad.
__________________

Última edición por zorro_87; 14-jul-2016 a las 16:49
Responder Citando
  #2  
Antiguo 13-jun-2015, 13:27
Avatar de DiabloRojo
DiabloRojo DiabloRojo está desconectado
Super Moderador
 
Fecha de Ingreso: 19-marzo-2005
Ubicación: En un lugar del planeta Tierra
Versión: La ultima estable
Mensajes: 16.478
Agradecimientos: 563
Agradecido 2.416 Veces en 1.627 Mensajes
Poder de Credibilidad: 10
DiabloRojo llegará a ser famoso muy pronto
Debería funcionarte porque la tecnología ya tiene sus dos años: https://forums.opensuse.org/showthre...Graphics-on-HP
__________________
NORMAS A CUMPLIR EN LOS FOROS (Lectura obligatoria) Lo siento, no contesto privados sobre problemas con GNU/Linux.
Síguenos en TWITTER y en FACEBOOK
Código:
Buscador de   Alojamiento      Alojamiento     Otros
 paquetes:    de imágenes:     de ficheros:    buscadores:
Search        TinyPic          Ifile Wuala     Simple y Facil
Webpinstant   Paste Suse       SendSpace       TextSnip  Cl1p
Responder Citando
  #3  
Antiguo 13-jun-2015, 17:05
Avatar de zorro_87
zorro_87 zorro_87 está desconectado
Aforado
 
Fecha de Ingreso: 18-noviembre-2010
Ubicación: Venezuela
Versión: Leap 42.1
Mensajes: 44
Agradecimientos: 9
Agradecido 1 Vez en 1 Mensaje
Poder de Credibilidad: 0
zorro_87 está en el buen camino
Cita:
Iniciado por DiabloRojo Ver Mensaje
Debería funcionarte porque la tecnología ya tiene sus dos años: https://forums.opensuse.org/showthre...Graphics-on-HP
Saludos DiabloRojo, gracias por responder, bueno como mencionas deberia funcionar esta tecnología, pero a mi no me inicia el escritorio o entorno gráfico . El sistema se queda en la pantalla del camaleon y de allí no pasa, he revisado el enlace que me indicaste pero no veo ninguna solución, lo del AMDOverdriverCtrl es una de las funciones que incorpora el AMD Catalyst en Windows 7 para configuraciones del CPU y GPU como Rendimiento y otras cosas. He buscado en internet informacion referente a AMD Dual Graphics en Linux y lo que mas se asemeja a lo que busco es esto: http://askubuntu.com/questions/20202...-dual-graphics

Pero me gustaria que alguien de la comunidad me dijera si han podido hacer funcionar esta tecnología y que tipo de configuración han hecho a parte de la Bios para iniciar el sistema con el escritorio.
__________________
Responder Citando
  #4  
Antiguo 13-jun-2015, 17:31
Avatar de Defton
Defton Defton está desconectado
Miembro Senior
 
Fecha de Ingreso: 03-abril-2007
Ubicación: Mexico/SanLuisPotosi
Versión: 42.1
Mensajes: 856
Agradecimientos: 7
Agradecido 149 Veces en 93 Mensajes
Poder de Credibilidad: 11
Defton está en el buen camino
Enviar un mensaje por MSN a Defton Enviar un mensaje por Skype™ a Defton
cuando este cargando playmoud (el camaleon que aparece durante el arranque) presiona la tecla esc y podrás ver lo que sucede, si te marca algún error o si se queda atorado en alguna parte y así podrás saber mas acertadamente por donde van los tiros.
Saludos.
__________________
__________________________________________________

Mi Blog:
http://elblogdedarkspark.blogspot.mx/
Canales de Youtube:
http://www.youtube.com/user/DarkSpark2099
http://www.youtube.com/user/defton En des-uso
Responder Citando
  #5  
Antiguo 13-jun-2015, 23:28
Avatar de mikrios
mikrios mikrios está desconectado
Miembro FOROSuSE
 
Fecha de Ingreso: 02-marzo-2013
Ubicación: Lat. 27.994547-Lon -15.405127-160m nivel del mar
Versión: 13.1-2,TW,Leap
Mensajes: 4.530
Agradecimientos: 1.911
Agradecido 1.402 Veces en 1.175 Mensajes
Poder de Credibilidad: 9
mikrios llegará a ser famoso muy pronto
También puede hacerlo en modo depuración (así se evita el plymouth) y si no como dicen Ctrl+Alt+F1 y para regresar a modo gráfico Ctrl+Alt+F7 .

Saludos cordiales
Responder Citando
  #6  
Antiguo 14-jun-2015, 01:53
Avatar de zorro_87
zorro_87 zorro_87 está desconectado
Aforado
 
Fecha de Ingreso: 18-noviembre-2010
Ubicación: Venezuela
Versión: Leap 42.1
Mensajes: 44
Agradecimientos: 9
Agradecido 1 Vez en 1 Mensaje
Poder de Credibilidad: 0
zorro_87 está en el buen camino
Cita:
Iniciado por Defton Ver Mensaje
cuando este cargando playmoud (el camaleon que aparece durante el arranque) presiona la tecla esc y podrás ver lo que sucede, si te marca algún error o si se queda atorado en alguna parte y así podrás saber mas acertadamente por donde van los tiros.
Saludos.
Saludos Defton, hice lo que me indicaste, y en el arranque no da error alguno pero si se queda atorado en la ultima linea de arranque la cual dice: [OK] Started Command Scheduler. y de allí no pasa. Adjunto una imagen para que se pueda apreciar hasta donde llega el arranque.

arranque del sistema.jpg
__________________
Responder Citando
  #7  
Antiguo 14-jun-2015, 02:18
Avatar de zorro_87
zorro_87 zorro_87 está desconectado
Aforado
 
Fecha de Ingreso: 18-noviembre-2010
Ubicación: Venezuela
Versión: Leap 42.1
Mensajes: 44
Agradecimientos: 9
Agradecido 1 Vez en 1 Mensaje
Poder de Credibilidad: 0
zorro_87 está en el buen camino
Cita:
Iniciado por mikrios Ver Mensaje
También puede hacerlo en modo depuración (así se evita el plymouth) y si no como dicen Ctrl+Alt+F1 y para regresar a modo gráfico Ctrl+Alt+F7 .

Saludos cordiales
Saludos mikrios, intente lo del modo de depuración al arrancar el sistema, pero la pantalla se que queda totalmente en negro. No hay señal del terminal o Consola.
__________________
Responder Citando
  #8  
Antiguo 14-jun-2015, 06:49
Avatar de lusadi
lusadi lusadi está desconectado
Aforado
 
Fecha de Ingreso: 17-abril-2007
Ubicación: México
Versión: Leap 42.1
Mensajes: 15
Agradecimientos: 7
Agradecido 5 Veces en 5 Mensajes
Poder de Credibilidad: 0
lusadi está en el buen camino
Enviar un mensaje por ICQ a lusadi Enviar un mensaje por AIM a lusadi Enviar un mensaje por MSN a lusadi Enviar un mensaje por Yahoo  a lusadi
¿Haz intentado instalar los drivers privatidos, desde consola o mediante otro equipo por ssh?
Yo tengo un equipo de escritorio con nvidia arranca y se quedaba congelado, lo instale los repositorios y el driver por ssh desde otro equipo y se soluciono.
__________________
Ultrabook HP Folio 13-1050la
Responder Citando
  #9  
Antiguo 14-jun-2015, 17:06
Avatar de mikrios
mikrios mikrios está desconectado
Miembro FOROSuSE
 
Fecha de Ingreso: 02-marzo-2013
Ubicación: Lat. 27.994547-Lon -15.405127-160m nivel del mar
Versión: 13.1-2,TW,Leap
Mensajes: 4.530
Agradecimientos: 1.911
Agradecido 1.402 Veces en 1.175 Mensajes
Poder de Credibilidad: 9
mikrios llegará a ser famoso muy pronto
Hola:

Cita:
Saludos Defton, hice lo que me indicaste, y en el arranque no da error alguno pero si se queda atorado en la ultima linea de arranque la cual dice: [OK] Started Command Scheduler. y de allí no pasa. Adjunto una imagen para que se pueda apreciar hasta donde llega el arranque.
Esas líneas a las que te refieres, son del arranque de systemd y por lo que veo están casi al final del proceso de systemd, por lo que no creo que el fallo este ahí ; si no después de systemd ( entre la carga de multi-user.target,graphical.target y la carga del sistema gráfico que estés usando ) , puede que provocado por los drivers de la gráfica y xorg .

Aunque no puedas iniciar un Ctrl+Alt+F1 porque es la que usa el sistema (TTY1) , puedes probar a arrancar otra consola o terminal TTY por ejemplo la 2, con Ctrl+ALT+F2 y una vez que hagas login prueba a ejecutar estos comandos para descartar fallos en systemd :

1º systemctl --failed para ver si hay algún fallo en alguna de las unidades que carga de systemd .

2º systemctl list-jobs por si ha quedado alguna unidad atascada o bloqueada y aún no ha finalizado .

Si en esa parte no hay problema y como la tty1 puede estar ocupada por el servidor x , mira si puedes ejecutar el arranque desde la tty2 ( ya sea con un init o con startx , etc..., por ejemplo el arrancar un login gráfico en plasma 5 lo hago ejecutando un sddm , pero no se si puede ir kdm etc..) .

No estoy usando gráfica amd , pero si se me hubiese presentado un problema gráfico con nvidia, también me es algo difícil resolver estos problemas (excepto por que uso btrfs y puedo des-hacer los cambios) .

Pero para poder investigar algo de los errores, seria cuestión de mirar los logs ( /var/log) y la configuración de xorg y también en tu directorio /home el archivo oculto de .xsession-errors .

Creo recordar de que alguien usa varias gráficas de amd en el foro, pero esto se ha comentado poco o fue hace mucho tiempo (de todas formas voy a mandar un PV a un compañero y le pregunto ) .

Edito:

Has intentado entrar en modo root ?

Saludos cordiales

Última edición por mikrios; 14-jun-2015 a las 17:12 Razón: añadir
Responder Citando
  #10  
Antiguo 16-jun-2015, 06:22
Avatar de zorro_87
zorro_87 zorro_87 está desconectado
Aforado
 
Fecha de Ingreso: 18-noviembre-2010
Ubicación: Venezuela
Versión: Leap 42.1
Mensajes: 44
Agradecimientos: 9
Agradecido 1 Vez en 1 Mensaje
Poder de Credibilidad: 0
zorro_87 está en el buen camino
Cita:
Iniciado por mikrios Ver Mensaje
Hola:



Esas líneas a las que te refieres, son del arranque de systemd y por lo que veo están casi al final del proceso de systemd, por lo que no creo que el fallo este ahí ; si no después de systemd ( entre la carga de multi-user.target,graphical.target y la carga del sistema gráfico que estés usando ) , puede que provocado por los drivers de la gráfica y xorg .

Aunque no puedas iniciar un Ctrl+Alt+F1 porque es la que usa el sistema (TTY1) , puedes probar a arrancar otra consola o terminal TTY por ejemplo la 2, con Ctrl+ALT+F2 y una vez que hagas login prueba a ejecutar estos comandos para descartar fallos en systemd :

1º systemctl --failed para ver si hay algún fallo en alguna de las unidades que carga de systemd .

2º systemctl list-jobs por si ha quedado alguna unidad atascada o bloqueada y aún no ha finalizado .

Si en esa parte no hay problema y como la tty1 puede estar ocupada por el servidor x , mira si puedes ejecutar el arranque desde la tty2 ( ya sea con un init o con startx , etc..., por ejemplo el arrancar un login gráfico en plasma 5 lo hago ejecutando un sddm , pero no se si puede ir kdm etc..) .

No estoy usando gráfica amd , pero si se me hubiese presentado un problema gráfico con nvidia, también me es algo difícil resolver estos problemas (excepto por que uso btrfs y puedo des-hacer los cambios) .

Pero para poder investigar algo de los errores, seria cuestión de mirar los logs ( /var/log) y la configuración de xorg y también en tu directorio /home el archivo oculto de .xsession-errors .

Creo recordar de que alguien usa varias gráficas de amd en el foro, pero esto se ha comentado poco o fue hace mucho tiempo (de todas formas voy a mandar un PV a un compañero y le pregunto ) .

Edito:

Has intentado entrar en modo root ?

Saludos cordiales
Hola mikrios, gracias por responder, hice lo que me dijiste en el mensaje, esta vez pude entrar en modo consola usando Ctrl+Alt+F1 y ejecute los comandos:

1º systemctl --failed

2º systemctl list-jobs

y me sale esto:

Terminal tty1.jpg

No tuve problemas por esa parte, lo que si no pude fue iniciar el entorno gráfico, use el comando init y startx y no me funcionó.

El arranque del sistema queda hasta aquí:

Sistema Cargando.jpg

El archivo Xorg.1.log

Código:
[  1019.987] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[  1019.987] 
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
[  1019.987] X Protocol Version 11, Revision 0
[  1019.987] Build Operating System: openSUSE SUSE LINUX
[  1019.987] Current Operating System: Linux linux-DarkLion 3.11.10-29-desktop #1 SMP PREEMPT Thu Mar 5 16:24:00 UTC 2015 (338c513) x86_64
[  1019.987] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-29-desktop root=UUID=66c94841-a244-436d-99a3-c4222e6824f5 resume=/dev/disk/by-id/ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F4055080-part5 splash=silent quiet showopts
[  1019.987] Build Date: 24 April 2015  02:26:18PM
[  1019.987]  
[  1019.987] Current version of pixman: 0.30.2
[  1019.987] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1019.987] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1019.988] (==) Log file: "/var/log/Xorg.1.log", Time: Mon Jun 15 14:16:38 2015
[  1019.990] (==) Using config file: "/etc/X11/xorg.conf"
[  1019.990] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1019.990] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1019.991] (==) ServerLayout "aticonfig Layout"
[  1019.991] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[  1019.991] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[  1019.992] (**) |   |-->Device "aticonfig-Device[0]-0"
[  1019.992] (==) Automatically adding devices
[  1019.992] (==) Automatically enabling devices
[  1019.992] (==) Automatically adding GPU devices
[  1019.992] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[  1019.992] 	Entry deleted from font path.
[  1019.992] (==) FontPath set to:
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/ghostscript/,
	/usr/share/fonts/cyrillic:unscaled,
	/usr/share/fonts/truetype/,
	built-ins
[  1019.992] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[  1019.992] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1019.992] (II) Loader magic: 0x804c20
[  1019.992] (II) Module ABI versions:
[  1019.992] 	X.Org ANSI C Emulation: 0.4
[  1019.992] 	X.Org Video Driver: 14.1
[  1019.992] 	X.Org XInput driver : 19.1
[  1019.992] 	X.Org Server Extension : 7.0
[  1019.994] (--) PCI:*(0:0:1:0) 1002:9644:1043:84c8 rev 0, Mem @ 0xb0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[  1019.995] (--) PCI: (0:1:0:0) 1002:6779:1043:04b5 rev 0, Mem @ 0xc0000000/268435456, 0xfea20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[  1019.995] Initializing built-in extension Generic Event Extension
[  1019.995] Initializing built-in extension SHAPE
[  1019.995] Initializing built-in extension MIT-SHM
[  1019.995] Initializing built-in extension XInputExtension
[  1019.995] Initializing built-in extension XTEST
[  1019.995] Initializing built-in extension BIG-REQUESTS
[  1019.995] Initializing built-in extension SYNC
[  1019.995] Initializing built-in extension XKEYBOARD
[  1019.995] Initializing built-in extension XC-MISC
[  1019.995] Initializing built-in extension SECURITY
[  1019.995] Initializing built-in extension XINERAMA
[  1019.995] Initializing built-in extension XFIXES
[  1019.995] Initializing built-in extension RENDER
[  1019.995] Initializing built-in extension RANDR
[  1019.995] Initializing built-in extension COMPOSITE
[  1019.995] Initializing built-in extension DAMAGE
[  1019.995] Initializing built-in extension MIT-SCREEN-SAVER
[  1019.995] Initializing built-in extension DOUBLE-BUFFER
[  1019.995] Initializing built-in extension RECORD
[  1019.995] Initializing built-in extension DPMS
[  1019.995] Initializing built-in extension X-Resource
[  1019.995] Initializing built-in extension XVideo
[  1019.995] Initializing built-in extension XVideo-MotionCompensation
[  1019.995] Initializing built-in extension XFree86-VidModeExtension
[  1019.995] Initializing built-in extension XFree86-DGA
[  1019.995] Initializing built-in extension XFree86-DRI
[  1019.995] Initializing built-in extension DRI2
[  1019.995] (II) "glx" will be loaded by default.
[  1019.995] (II) LoadModule: "glx"
[  1019.995] (II) Loading /usr/lib64/xorg/modules/updates/extensions/libglx.so
[  1019.995] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[  1019.995] 	compiled for 6.9.0, module version = 1.0.0
[  1020.000] Loading extension GLX
[  1020.000] (II) LoadModule: "fglrx"
[  1020.001] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[  1020.024] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[  1020.024] 	compiled for 1.4.99.906, module version = 14.50.2
[  1020.024] 	Module class: X.Org Video Driver
[  1020.027] (II) Loading sub module "fglrxdrm"
[  1020.027] (II) LoadModule: "fglrxdrm"
[  1020.028] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[  1020.028] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[  1020.028] 	compiled for 1.4.99.906, module version = 14.50.2
[  1020.028] (II) AMD Proprietary Linux Driver Version Identifier:14.50.2
[  1020.028] (II) AMD Proprietary Linux Driver Release Identifier: 14.501.1003                          
[  1020.028] (II) AMD Proprietary Linux Driver Build Date: Nov 20 2014 21:22:54
[  1020.028] (--) using VT number 3

[  1020.038] (WW) Falling back to old probe method for fglrx
[  1020.050] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[  1020.061] ukiDynamicMajor: found major device number 250
[  1020.061] ukiDynamicMajor: found major device number 250
[  1020.061] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1020.061] ukiOpenDevice: node name is /dev/ati/card0
[  1020.061] ukiOpenDevice: open result is 9, (OK)
[  1020.061] ukiOpenByBusid: ukiOpenMinor returns 9
[  1020.061] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1020.061] ukiOpenDevice: node name is /dev/ati/card1
[  1020.061] ukiOpenDevice: open result is 9, (OK)
[  1020.061] ukiOpenByBusid: ukiOpenMinor returns 9
[  1020.061] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1020.065] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:0) found
[  1020.065] (--) Chipset Supported AMD Graphics Processor (0x6779) found
[  1020.065] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[  1020.065] (**) ChipID override: 0x9644
[  1020.065] (**) Chipset Supported AMD Graphics Processor (0x9644) found
[  1020.066] (II) fglrx(0): pEnt->device->identifier=0x1610270
[  1020.066] (II) pEnt->device->identifier=(nil)
[  1020.066] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[  1020.066] (II) fglrx(0): FB driver is enabled
[  1020.066] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[  1020.066] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  1020.066] (==) fglrx(0): Default visual is TrueColor
[  1020.066] (**) fglrx(0): Option "DPMS" "true"
[  1020.066] (==) fglrx(0): RGB weight 888
[  1020.066] (II) fglrx(0): Using 8 bits per RGB 
[  1020.066] (==) fglrx(0): Buffer Tiling is ON
[  1020.066] (II) Loading sub module "fglrxdrm"
[  1020.066] (II) LoadModule: "fglrxdrm"
[  1020.066] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[  1020.067] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[  1020.067] 	compiled for 1.4.99.906, module version = 14.50.2
[  1020.072] ukiDynamicMajor: found major device number 250
[  1020.072] ukiDynamicMajor: found major device number 250
[  1020.072] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1020.072] ukiOpenDevice: node name is /dev/ati/card0
[  1020.072] ukiOpenDevice: open result is 11, (OK)
[  1020.072] ukiOpenByBusid: ukiOpenMinor returns 11
[  1020.072] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1020.072] ukiOpenDevice: node name is /dev/ati/card1
[  1020.072] ukiOpenDevice: open result is 11, (OK)
[  1020.072] ukiOpenByBusid: ukiOpenMinor returns 11
[  1020.072] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1020.072] ukiDynamicMajor: found major device number 250
[  1020.072] ukiDynamicMajor: found major device number 250
[  1020.072] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[  1020.072] ukiOpenDevice: node name is /dev/ati/card0
[  1020.072] ukiOpenDevice: open result is 12, (OK)
[  1020.072] ukiOpenByBusid: ukiOpenMinor returns 12
[  1020.072] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1020.073] (**) fglrx(0): NoAccel = NO
[  1020.073] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[  1020.073] (--) fglrx(0): Chipset: "AMD Radeon HD 6450  " (Chipset = 0x6779)
[  1020.073] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x04b5)
[  1020.073] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[  1020.073] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[  1020.073] (--) fglrx(0): MMIO registers at 0xfea20000
[  1020.073] (--) fglrx(0): I/O port at 0x0000e000
[  1020.073] (==) fglrx(0): ROM-BIOS at 0x000c0000
[  1020.073] (II) fglrx(0): AC Adapter is used
[  1020.073] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[  1020.073] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[  1020.073] (II) fglrx(0): PCIE card detected
[  1020.073] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[  1020.073] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[  1020.073] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x84c8)
[  1020.073] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[  1020.073] (--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
[  1020.073] (--) fglrx(0): MMIO registers at 0xfeb00000
[  1020.073] (--) fglrx(0): I/O port at 0x0000f000
[  1020.073] (==) fglrx(0): ROM-BIOS at 0x000c0000
[  1020.073] (II) fglrx(0): AC Adapter is used
[  1020.074] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[  1020.074] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[  1020.074] (II) fglrx(0): PCIE card detected
[  1020.074] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[  1020.074] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[  1020.074] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[  1020.074] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[  1020.074] (II) fglrx(0): RandR 1.2 support is enabled!
[  1020.074] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[  1020.074] (II) Loading sub module "fb"
[  1020.074] (II) LoadModule: "fb"
[  1020.074] (II) Loading /usr/lib64/xorg/modules/libfb.so
[  1020.074] (II) Module fb: vendor="X.Org Foundation"
[  1020.074] 	compiled for 1.14.3.901, module version = 1.0.0
[  1020.074] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1020.074] (II) fglrx(0): EDID Management option: EDID Management is enabled
[  1020.074] (II) Loading sub module "ddc"
[  1020.074] (II) LoadModule: "ddc"
[  1020.074] (II) Module "ddc" already built-in
[  1020.214] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[  1020.214] (II) fglrx(0): Output DFP2 has no monitor section
[  1020.214] (II) fglrx(0): Output CRT1 has no monitor section
[  1020.214] (II) Loading sub module "ddc"
[  1020.214] (II) LoadModule: "ddc"
[  1020.214] (II) Module "ddc" already built-in
[  1020.214] (II) fglrx(0): Dynamic Surface Resizing Enabled
[  1020.215] (II) fglrx(0): EDID for output DFP1
[  1020.215] (II) fglrx(0): EDID for output DFP2
[  1020.215] (II) fglrx(0): Printing probed modes for output CRT1
[  1020.215] (II) fglrx(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP)
[  1020.215] (II) fglrx(0): Modeline "1400x1050"x60.0  122.61  1400 1488 1640 1880  1050 1051 1054 1087 -hsync +vsync (65.2 kHz e)
[  1020.215] (II) fglrx(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[  1020.215] (II) fglrx(0): Modeline "1360x1024"x60.0  116.01  1360 1448 1592 1824  1024 1025 1028 1060 -hsync +vsync (63.6 kHz e)
[  1020.215] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  1020.215] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[  1020.215] (II) fglrx(0): Modeline "1280x960"x60.0  102.10  1280 1360 1496 1712  960 961 964 994 -hsync +vsync (59.6 kHz e)
[  1020.215] (II) fglrx(0): Modeline "1366x768"x60.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
[  1020.215] (II) fglrx(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[  1020.215] (II) fglrx(0): Modeline "1280x800"x60.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[  1020.215] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[  1020.215] (II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[  1020.215] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  1020.215] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  1020.215] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  1020.215] (II) fglrx(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[  1020.215] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  1020.215] (II) fglrx(0): Output DFP1 disconnected
[  1020.215] (II) fglrx(0): Output DFP2 disconnected
[  1020.215] (II) fglrx(0): Output CRT1 connected
[  1020.215] (II) fglrx(0): Using exact sizes for initial modes
[  1020.215] (II) fglrx(0): Output CRT1 using initial mode 1600x1200
[  1020.215] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  1020.215] (II) fglrx(0): DPI set to (96, 96)
[  1020.215] (II) fglrx(0): Eyefinity capable adapter detected.
[  1020.215] (II) fglrx(0): Adapter AMD Radeon HD 6450   has 3 configurable heads and 0 displays connected.
[  1020.215] (==) fglrx(0):  PseudoColor visuals disabled
[  1020.215] (II) Loading sub module "ramdac"
[  1020.215] (II) LoadModule: "ramdac"
[  1020.215] (II) Module "ramdac" already built-in
[  1020.215] (==) fglrx(0): NoDRI = NO
[  1020.215] (==) fglrx(0): Capabilities: 0x00000000
[  1020.215] (==) fglrx(0): CapabilitiesEx: 0x00000000
[  1020.215] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[  1020.215] (==) fglrx(0): UseFastTLS=0
[  1020.215] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[  1020.216] (--) Depth 24 pixmap format is 32 bpp
[  1020.216] Loading extension ATIFGLRXDRI
[  1020.216] (II) fglrx(0): doing swlDriScreenInit
[  1020.216] (II) fglrx(0): swlDriScreenInit for fglrx driver
[  1020.216] ukiDynamicMajor: found major device number 250
[  1020.216] ukiDynamicMajor: found major device number 250
[  1020.216] ukiDynamicMajor: found major device number 250
[  1020.216] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1020.216] ukiOpenDevice: node name is /dev/ati/card0
[  1020.216] ukiOpenDevice: open result is 13, (OK)
[  1020.216] ukiOpenByBusid: ukiOpenMinor returns 13
[  1020.216] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1020.216] ukiOpenDevice: node name is /dev/ati/card1
[  1020.216] ukiOpenDevice: open result is 13, (OK)
[  1020.216] ukiOpenByBusid: ukiOpenMinor returns 13
[  1020.216] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1020.216] (II) fglrx(0): [uki] DRM interface version 1.0
[  1020.216] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[  1020.216] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x14e000
[  1020.216] (II) fglrx(0): [uki] mapped SAREA 0x14e000 to 0x7f853c8ce000
[  1020.216] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[  1020.216] (II) fglrx(0): [uki] added 1 reserved context for kernel
[  1020.216] (II) fglrx(0): swlDriScreenInit done
[  1020.216] (II) fglrx(0): Kernel Module Version Information:
[  1020.216] (II) fglrx(0):     Name: fglrx
[  1020.216] (II) fglrx(0):     Version: 14.50.2
[  1020.216] (II) fglrx(0):     Date: Nov 20 2014
[  1020.216] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[  1020.216] (II) fglrx(0): Kernel Module version matches driver.
[  1020.216] (II) fglrx(0): Kernel Module Build Time Information:
[  1020.216] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.11.10-29-desktop
[  1020.216] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[  1020.216] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[  1020.216] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[  1020.216] (II) fglrx(0): [uki] register handle = 0x00004000
[  1020.217] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
[  1020.217] (II) fglrx(0): DRI initialization successfull
[  1020.217] (II) fglrx(0): FBADPhys: 0xf01b20000 FBMappedSize: 0x01110000
[  1020.217] (==) fglrx(0): Backing store disabled
[  1020.217] Loading extension FGLRXEXTENSION
[  1020.217] (**) fglrx(0): DPMS enabled
[  1020.217] (II) fglrx(0): Initialized in-driver Xinerama extension
[  1020.217] (**) fglrx(0): Textured Video is enabled.
[  1020.217] (II) LoadModule: "glesx"
[  1020.218] (II) Loading /usr/lib64/xorg/modules/glesx.so
[  1020.220] (II) Module glesx: vendor="X.Org Foundation"
[  1020.220] 	compiled for 1.4.99.906, module version = 1.0.0
[  1020.220] Loading extension GLESX
[  1020.220] (II) fglrx(0): GLESX enableFlags = 8784
[  1020.221] (II) fglrx(0): GLESX is enabled
[  1020.221] (II) LoadModule: "amdxmm"
[  1020.221] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[  1020.221] (II) Module amdxmm: vendor="X.Org Foundation"
[  1020.221] 	compiled for 1.4.99.906, module version = 2.0.0
[  1020.231] Loading extension AMDXVOPL
[  1020.231] Loading extension AMDXVBA
[  1020.232] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[  1020.235] (II) fglrx(0): Enable composite support successfully
[  1020.235] (WW) fglrx(0): Option "VendorName" is not used
[  1020.235] (WW) fglrx(0): Option "ModelName" is not used
[  1020.235] (II) fglrx(0): X context handle = 0x5
[  1020.235] (II) fglrx(0): [DRI] installation complete
[  1020.235] (==) fglrx(0): Silken mouse enabled
[  1020.235] (==) fglrx(0): Using HW cursor of display infrastructure!
[  1020.236] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1020.297] (--) RandR disabled
[  1020.303] ukiDynamicMajor: found major device number 250
[  1020.303] ukiDynamicMajor: found major device number 250
[  1020.303] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1020.303] ukiOpenDevice: node name is /dev/ati/card0
[  1020.303] ukiOpenDevice: open result is 12, (OK)
[  1020.303] ukiOpenByBusid: ukiOpenMinor returns 12
[  1020.303] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1020.303] ukiOpenDevice: node name is /dev/ati/card1
[  1020.303] ukiOpenDevice: open result is 12, (OK)
[  1020.303] ukiOpenByBusid: ukiOpenMinor returns 12
[  1020.303] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1020.306] ukiDynamicMajor: found major device number 250
[  1020.306] ukiDynamicMajor: found major device number 250
[  1020.306] ukiDynamicMajor: found major device number 250
[  1020.306] ukiOpenDevice: node name is /dev/ati/card0
[  1020.306] ukiOpenDevice: open result is 14, (OK)
[  1020.306] ukiGetBusid returned 'PCI:0:1:0'
[  1020.306] ukiOpenDevice: node name is /dev/ati/card1
[  1020.306] ukiOpenDevice: open result is 14, (OK)
[  1020.306] ukiGetBusid returned 'PCI:1:0:0'
[  1020.306] ukiOpenDevice: node name is /dev/ati/card2
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: Open failed
[  1020.306] ukiOpenDevice: node name is /dev/ati/card3
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: Open failed
[  1020.306] ukiOpenDevice: node name is /dev/ati/card4
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: Open failed
[  1020.306] ukiOpenDevice: node name is /dev/ati/card5
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: Open failed
[  1020.306] ukiOpenDevice: node name is /dev/ati/card6
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: Open failed
[  1020.306] ukiOpenDevice: node name is /dev/ati/card7
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: Open failed
[  1020.306] ukiOpenDevice: node name is /dev/ati/card8
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.306] ukiOpenDevice: Open failed
[  1020.306] ukiOpenDevice: node name is /dev/ati/card9
[  1020.306] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: Open failed
[  1020.307] ukiOpenDevice: node name is /dev/ati/card10
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: Open failed
[  1020.307] ukiOpenDevice: node name is /dev/ati/card11
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: Open failed
[  1020.307] ukiOpenDevice: node name is /dev/ati/card12
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: Open failed
[  1020.307] ukiOpenDevice: node name is /dev/ati/card13
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: Open failed
[  1020.307] ukiOpenDevice: node name is /dev/ati/card14
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: Open failed
[  1020.307] ukiOpenDevice: node name is /dev/ati/card15
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: open result is -1, (No such device)
[  1020.307] ukiOpenDevice: Open failed
[  1020.307] ukiDynamicMajor: found major device number 250
[  1020.307] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[  1020.307] ukiOpenDevice: node name is /dev/ati/card0
[  1020.307] ukiOpenDevice: open result is 14, (OK)
[  1020.307] ukiOpenByBusid: ukiOpenMinor returns 14
[  1020.307] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1020.353] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[  1020.354] ukiDynamicMajor: found major device number 250
[  1020.354] ukiDynamicMajor: found major device number 250
[  1020.354] ukiDynamicMajor: found major device number 250
[  1020.354] ukiOpenDevice: node name is /dev/ati/card0
[  1020.354] ukiOpenDevice: open result is 15, (OK)
[  1020.354] ukiGetBusid returned 'PCI:0:1:0'
[  1020.354] ukiOpenDevice: node name is /dev/ati/card1
[  1020.354] ukiOpenDevice: open result is 15, (OK)
[  1020.354] ukiGetBusid returned 'PCI:1:0:0'
[  1020.354] ukiOpenDevice: node name is /dev/ati/card2
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: Open failed
[  1020.354] ukiOpenDevice: node name is /dev/ati/card3
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: Open failed
[  1020.354] ukiOpenDevice: node name is /dev/ati/card4
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: Open failed
[  1020.354] ukiOpenDevice: node name is /dev/ati/card5
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: Open failed
[  1020.354] ukiOpenDevice: node name is /dev/ati/card6
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: Open failed
[  1020.354] ukiOpenDevice: node name is /dev/ati/card7
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: Open failed
[  1020.354] ukiOpenDevice: node name is /dev/ati/card8
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: open result is -1, (No such device)
[  1020.354] ukiOpenDevice: Open failed
[  1020.354] ukiOpenDevice: node name is /dev/ati/card9
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: Open failed
[  1020.355] ukiOpenDevice: node name is /dev/ati/card10
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: Open failed
[  1020.355] ukiOpenDevice: node name is /dev/ati/card11
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: Open failed
[  1020.355] ukiOpenDevice: node name is /dev/ati/card12
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: Open failed
[  1020.355] ukiOpenDevice: node name is /dev/ati/card13
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: Open failed
[  1020.355] ukiOpenDevice: node name is /dev/ati/card14
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: Open failed
[  1020.355] ukiOpenDevice: node name is /dev/ati/card15
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: open result is -1, (No such device)
[  1020.355] ukiOpenDevice: Open failed
[  1020.355] ukiDynamicMajor: found major device number 250
[  1020.355] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[  1020.355] ukiOpenDevice: node name is /dev/ati/card0
[  1020.355] ukiOpenDevice: open result is 15, (OK)
[  1020.355] ukiOpenByBusid: ukiOpenMinor returns 15
[  1020.355] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[  1020.368] (II) fglrx(0): OverDrive5 Detected!
[  1020.373] (II) fglrx(0): Setting screen physical size to 423 x 317
[  1020.450] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1020.450] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1020.450] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1020.450] (**) Power Button: Applying InputClass "LocalKeyboard"
[  1020.450] (II) LoadModule: "evdev"
[  1020.450] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[  1020.450] (II) Module evdev: vendor="X.Org Foundation"
[  1020.450] 	compiled for 1.14.3, module version = 2.8.2
[  1020.450] 	Module class: X.Org XInput Driver
[  1020.450] 	ABI class: X.Org XInput driver, version 19.1
[  1020.450] (II) Using input driver 'evdev' for 'Power Button'
[  1020.450] (**) Power Button: always reports core events
[  1020.450] (**) evdev: Power Button: Device: "/dev/input/event3"
[  1020.451] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1020.451] (--) evdev: Power Button: Found keys
[  1020.451] (II) evdev: Power Button: Configuring as keyboard
[  1020.451] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[  1020.451] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1020.451] (**) Option "xkb_rules" "evdev"
[  1020.451] (**) Option "xkb_model" "pc104"
[  1020.451] (**) Option "xkb_layout" "es"
[  1020.506] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  1020.506] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1020.506] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1020.506] (**) Power Button: Applying InputClass "LocalKeyboard"
[  1020.506] (II) Using input driver 'evdev' for 'Power Button'
[  1020.506] (**) Power Button: always reports core events
[  1020.506] (**) evdev: Power Button: Device: "/dev/input/event2"
[  1020.506] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1020.506] (--) evdev: Power Button: Found keys
[  1020.506] (II) evdev: Power Button: Configuring as keyboard
[  1020.506] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[  1020.506] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  1020.506] (**) Option "xkb_rules" "evdev"
[  1020.506] (**) Option "xkb_model" "pc104"
[  1020.506] (**) Option "xkb_layout" "es"
[  1020.508] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event10)
[  1020.508] (II) No input driver specified, ignoring this device.
[  1020.508] (II) This device may have been added with another device file.
[  1020.509] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/event1)
[  1020.509] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[  1020.509] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[  1020.509] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[  1020.509] (**)  USB OPTICAL MOUSE: always reports core events
[  1020.509] (**) evdev:  USB OPTICAL MOUSE: Device: "/dev/input/event1"
[  1020.509] (--) evdev:  USB OPTICAL MOUSE: Vendor 0x15d9 Product 0xa4c
[  1020.509] (--) evdev:  USB OPTICAL MOUSE: Found 3 mouse buttons
[  1020.509] (--) evdev:  USB OPTICAL MOUSE: Found scroll wheel(s)
[  1020.509] (--) evdev:  USB OPTICAL MOUSE: Found relative axes
[  1020.509] (--) evdev:  USB OPTICAL MOUSE: Found x and y relative axes
[  1020.509] (II) evdev:  USB OPTICAL MOUSE: Configuring as mouse
[  1020.509] (II) evdev:  USB OPTICAL MOUSE: Adding scrollwheel support
[  1020.509] (**) evdev:  USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[  1020.509] (**) evdev:  USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1020.509] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb7/7-3/7-3:1.0/input/input1/event1"
[  1020.509] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 8)
[  1020.510] (II) evdev:  USB OPTICAL MOUSE: initialized for relative axes.
[  1020.510] (**)  USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[  1020.510] (**)  USB OPTICAL MOUSE: (accel) acceleration profile 0
[  1020.510] (**)  USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[  1020.510] (**)  USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[  1020.511] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/mouse0)
[  1020.511] (II) No input driver specified, ignoring this device.
[  1020.511] (II) This device may have been added with another device file.
[  1020.512] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event5)
[  1020.512] (II) No input driver specified, ignoring this device.
[  1020.512] (II) This device may have been added with another device file.
[  1020.513] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event6)
[  1020.513] (II) No input driver specified, ignoring this device.
[  1020.514] (II) This device may have been added with another device file.
[  1020.514] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event7)
[  1020.514] (II) No input driver specified, ignoring this device.
[  1020.514] (II) This device may have been added with another device file.
[  1020.515] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event8)
[  1020.515] (II) No input driver specified, ignoring this device.
[  1020.515] (II) This device may have been added with another device file.
[  1020.516] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event9)
[  1020.516] (II) No input driver specified, ignoring this device.
[  1020.516] (II) This device may have been added with another device file.
[  1020.517] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event11)
[  1020.517] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  1020.517] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  1020.517] (**) Eee PC WMI hotkeys: Applying InputClass "LocalKeyboard"
[  1020.517] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[  1020.517] (**) Eee PC WMI hotkeys: always reports core events
[  1020.517] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event11"
[  1020.517] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[  1020.517] (--) evdev: Eee PC WMI hotkeys: Found keys
[  1020.517] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[  1020.517] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input11/event11"
[  1020.517] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 9)
[  1020.517] (**) Option "xkb_rules" "evdev"
[  1020.517] (**) Option "xkb_model" "pc104"
[  1020.517] (**) Option "xkb_layout" "es"
[  1020.518] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1020.518] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1020.518] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1020.518] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[  1020.518] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  1020.518] (**) AT Translated Set 2 keyboard: always reports core events
[  1020.518] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  1020.518] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  1020.518] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  1020.518] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  1020.518] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1020.518] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[  1020.518] (**) Option "xkb_rules" "evdev"
[  1020.518] (**) Option "xkb_model" "pc104"
[  1020.518] (**) Option "xkb_layout" "es"
[  1020.520] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[  1020.520] (II) No input driver specified, ignoring this device.
[  1020.520] (II) This device may have been added with another device file.
[  1020.547] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[  1020.547] (WW) fglrx(0): os shared memory open failed
[  1027.828] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1027.828] (II) fglrx(0): Backup framebuffer data.
[  1027.850] (II) fglrx(0): Backup complete.
[  1384.276] (II) evdev: AT Translated Set 2 keyboard: Close
[  1384.276] (II) UnloadModule: "evdev"
[  1384.276] (II) evdev: Eee PC WMI hotkeys: Close
[  1384.276] (II) UnloadModule: "evdev"
[  1384.276] (II) evdev:  USB OPTICAL MOUSE: Close
[  1384.276] (II) UnloadModule: "evdev"
[  1384.276] (II) evdev: Power Button: Close
[  1384.276] (II) UnloadModule: "evdev"
[  1384.276] (II) evdev: Power Button: Close
[  1384.276] (II) UnloadModule: "evdev"
[  1384.277] (II) fglrx(0): Shutdown CMMQS
[  1384.278] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[  1384.278] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x14e000 at 0x7f853c8ce000
[  1384.283] (EE) Server terminated successfully (0). Closing log file.

El archivo.xsession-errors
Código:
/etc/X11/xim: Checking whether an input method should be started.
sourcing /etc/sysconfig/language to get the value of INPUT_METHOD
INPUT_METHOD is not set or empty (no user selected input method).
Trying to start a default input method for the locale es_ES.UTF-8 ...
There is no default input method for the current locale.
Dummy input method "none" (do not use any fancy input method by default)
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
This backend is only for XRandR 1.1, your version is:  1 . 3 
QObject::connect: Cannot connect (null)::deviceFound(Device*) to BlueDevilDaemon::deviceFound(Device*)
QObject::connect: Cannot connect QTimer::timeout() to (null)::stopDiscovery()
kded(1168)/kdeui (Wallet): The kwalletd service has been disabled 
No outputs have backlight property
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
QObject::connect: Cannot connect (null)::resourceScoreUpdated(QString, QString, QString, double) to NepomukPlugin::resourceScoreUpdated(QString, QString, QString, double)
QObject::connect: Cannot connect (null)::recentStatsDeleted(QString, int, QString) to NepomukPlugin::deleteRecentStats(QString, int, QString)
QObject::connect: Cannot connect (null)::earlierStatsDeleted(QString, int) to NepomukPlugin::deleteEarlierStats(QString, int)
QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.18'
kwin(1245): ""fsrestore1" - conversion of "0,0,0,0" to QRect failed" 
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
OpenGL vendor string:                   ATI Technologies Inc.
OpenGL renderer string:                 AMD Radeon HD 6450  
OpenGL version string:                  4.4.13283 Compatibility Profile Context 14.501.1003
OpenGL shading language version string: 4.40
Driver:                                 Catalyst
Driver version:                         4.4.13283
GPU class:                              NI
OpenGL version:                         4.4.13283
GLSL version:                           4.40
X server version:                       1.14.3
Linux kernel version:                   3.11.10
Direct rendering:                       yes
Requires strict binding:                yes
GLSL shaders:                           yes
Texture NPOT support:                   yes
Virtual Machine:                        no
QDBusObjectPath: invalid path ""
plasma-desktop(1257): ""geometry" - conversion of "58,2,0,25" to QRectF failed" 
plasma-desktop(1257): ""geometry" - conversion of "58,2,0,25" to QRectF failed" 
plasma-desktop(1257): ""geometry" - conversion of "58,2,0,25" to QRectF failed" 
plasma-desktop(1257): ""geometry" - conversion of "58,2,0,25" to QRectF failed" 
plasma-desktop(1257)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability 
plasma-desktop(1257)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability 
plasma-desktop(1257)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability 
plasma-desktop(1257)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability 
plasma-desktop(1257)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability 
plasma-desktop(1257)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability 
QGraphicsLinearLayout::insertItem: cannot insert null item
plasma-desktop(1257)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability 
plasma-desktop(1257): ""geometry" - conversion of "58,2,0,25" to QRectF failed" 
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
plasma-desktop(1257)/kdeui (Wallet): The kwalletd service has been disabled 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
QGraphicsLinearLayout::removeAt: invalid index 0
QGraphicsLinearLayout::insertItem: cannot insert null item
========================>  8 0
static bool QDeclarativeMetaType::isModule(const QByteArray&, int, int) Qt 4.7 import detected; please note that Qt 4.7 is directly reusable as QtQuick 1.x with no code changes. Continuing, but startup time will be slower. 
kded(1168)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting  "802-1x" not initialized 
kded(1168)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting  "802-1x" not initialized 
kded(1168)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting  "802-11-wireless-security" not initialized 
kded(1168)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting  "ipv4" not initialized 
kded(1168)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting  "ipv6" not initialized 
kded(1168)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting  "802-1x" not initialized 
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
file:///usr/lib64/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: TypeError: Result of expression 'listView' [null] is not an object.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/SectionScroller.qml:175: ReferenceError: Can't find variable: sectionsRepeater
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_99: Detectado posible bucle de anclaje en «fill».
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_99: Detectado posible bucle de anclaje en «fill».
kded(1168)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting  "802-1x" not initialized 
Adding key-mgmt: wpa-psk 
kded(1168)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting  "802-1x" not initialized 
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_99: Detectado posible bucle de anclaje en «fill».
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_99: Detectado posible bucle de anclaje en «fill».
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_99: Detectado posible bucle de anclaje en «fill».
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_99: Detectado posible bucle de anclaje en «fill».
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_99: Detectado posible bucle de anclaje en «fill».
QGridLayoutEngine::addItem: Cell (0, 1) already taken
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)

HP Linux Imaging and Printing System (ver. 3.14.6)
System Tray Status Service ver. 2.0

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.


System Tray monitors the HP device status and Displays

Usage: hp-systray [MODE] [OPTIONS]


[MODE]
  Run in graphical    -u or --gui (Default)                                 
  UI mode:                                                                  

[OPTIONS]
  Use Qt4:            --qt4 (Default)                                       
  Set the logging     -l or --logging=                        
  level:                                                                    
                      : none, info*, error, warn, debug (*default)   
  Run in debug mode:  -g (same as option: -ldebug)                          
  This help           -h or --help                                          
  information:                                                              

  Startup even if no  -x or --force-startup                                 
  hplip CUPS queues                                                         
  are present:                                                              

error: option -s not recognized
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
libpng warning: iCCP: known incorrect sRGB profile
QWidget::insertAction: Attempt to insert null action
Starting Dropbox...
HP Linux Imaging and Printing System (ver. 3.14.6)
System Tray Status Service ver. 2.0

Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

New PolkitAgentListener  0x11dde20 
Adding new listener  PolkitQt1::Agent::Listener(0x13630c0) for  0x11dde20 
usage: synaptikscfg [-h] [--version] {init,load,save} ...
synaptikscfg: error: no touchpad found
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
Dropbox isn't running!
Done!
/usr/lib64/python2.7/site-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK
  set_interactive(1)
Another instance of Dropbox (1524) is running!
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
kio_http_cache_cleaner: Already running!
kio_http_cache_cleaner: Already running!
kio_http_cache_cleaner: Already running!
Calling appendChild() on a null node does nothing.
I/O warning : failed to load external entity "/usr/share/qalculate/prefixes.xml"
I/O warning : failed to load external entity "/usr/share/qalculate/currencies.xml"
I/O warning : failed to load external entity "/usr/share/qalculate/units.xml"
I/O warning : failed to load external entity "/usr/share/qalculate/functions.xml"
I/O warning : failed to load external entity "/usr/share/qalculate/datasets.xml"
I/O warning : failed to load external entity "/usr/share/qalculate/variables.xml"
I/O warning : failed to load external entity "/usr/share/qalculate/currencies.xml"
I/O warning : failed to load external entity "/home/harrinson/.qalculate/eurofxref-daily.xml"
I/O warning : failed to load external entity "/home/harrinson/.qalculate/eurofxref-daily.xml"
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
kbuildsycoca4 running...
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted

(process:2045): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QLayout: Attempting to add QLayout "" to PhononWidget "", which already has a layout
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Failed to open VDPAU backend libvdpau_nvidia.so: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio
vo_vdpau: Can't create vdp device : No vdpau implementation.
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
plasma-desktop(1257) KConfigGroup::readXdgListEntry: List entry MimeType in "/home/harrinson/Escritorio/MozillaFirefox.desktop" is not compliant with XDG standard (missing trailing semicolon). 
klauncher(1166) KConfigGroup::readXdgListEntry: List entry MimeType in "/home/harrinson/Escritorio/MozillaFirefox.desktop" is not compliant with XDG standard (missing trailing semicolon). 
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted

(process:22467): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
xv_set_property: property=0, value=0
xv_set_property: property=0, value=0
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/block_devices/sr1" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/block_devices/sr1" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/block_devices/sr1" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/block_devices/sr1" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263_1" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/block_devices/sr1" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/block_devices/sr1" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263_1" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263_1" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263_1" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263_1" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/block_devices/sr1" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263_1" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263_1" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/drives/Huawei_Incorporated_Ideos_84A8E4AAA263_1" has new interfaces: ("org.freedesktop.UDisks2.Drive") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.Block") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.PartitionTable") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.PartitionTable") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.PartitionTable") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.PartitionTable") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.PartitionTable") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.PartitionTable") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.PartitionTable") 
"/org/freedesktop/UDisks2/block_devices/sdf" has new interfaces: ("org.freedesktop.UDisks2.PartitionTable") 
"/org/freedesktop/UDisks2/block_devices/sdf1" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf1" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf1" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf1" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf1" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf1" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf1" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf1" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf2" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf2" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf2" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf2" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf2" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf2" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf2" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
"/org/freedesktop/UDisks2/block_devices/sdf2" has new interfaces: ("org.freedesktop.UDisks2.Block", "org.freedesktop.UDisks2.Filesystem", "org.freedesktop.UDisks2.Partition") 
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/DeviceItem.qml:67: TypeError: Result of expression 'notifierDialog.highlightItem' [null] is not an object.
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
QLayout: Attempting to add QLayout "" to PhononWidget "", which already has a layout
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(24423)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(24423)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(24423) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(24479)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(24479)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(24479) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x4600015
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(24526)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(24526)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(24526) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x4400015
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(24612)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(24612)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(24612) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x4400015
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
dolphin(24327)/kdecore (services) KServicePrivate::init: The desktop entry file  "/home/harrinson/.directory"  has Type= "Application"  but no Exec line 

dolphin(24327)/kio (KDirWatch) KDirWatchPrivate::removeEntry: doesn't know "/home" 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(24880)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(24880)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(24880) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x4600015
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setCompositionMode: Painter not active
QPainter::end: Painter not active, aborted
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(26226)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(26226)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(26226) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(26226) Gwenview::ThumbnailProvider::checkThumbnail: Thumbnail for "file:///home/harrinson/Descargas/konsola.jpg" does not contain correct image size information 
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x4400015
libpng warning: iCCP: known incorrect sRGB profile
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(26560)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(26560)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(26560) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x3c00015
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(26672)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(26672)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(26672) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(26751)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(26751)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(26751) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(28028)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(28028)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(28028) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(28028) Gwenview::ViewMainPage::url: Condition ' d->currentView() ' failed. 
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x4600015
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
dolphin(24327)/kdecore (services) KServicePrivate::init: The desktop entry file  "/home/harrinson/Descargas/.directory"  has Type= "Application"  but no Exec line 

Ignoring source as no aboutToFinish handling is in progress. 
Ignoring source as no aboutToFinish handling is in progress. 
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x3e00206
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(28348)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(28348)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(28348) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(28640)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(28640)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(28640) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(28640) Gwenview::ThumbnailProvider::checkThumbnail: Thumbnail for "file:///home/harrinson/Descargas/konsola.jpg" does not contain correct image size information 
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x4400015
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(28832)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(28832)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(28832) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
gwenview(29704)/kdeui (kdelibs): Attempt to use QAction "edit_redo" with KXMLGUIFactory! 
gwenview(29704)/kdeui (kdelibs): Attempt to use QAction "edit_undo" with KXMLGUIFactory! 
gwenview(29704) Gwenview::ViewMainPagePrivate::setCurrentView: No index found for current view 
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: Permiso denegado
QFileSystemWatcher: failed to add paths: /lost+found
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: Permiso denegado
QFileSystemWatcher: failed to add paths: /root
dolphin(24327)/kio (KDirWatch) KDirWatchPrivate::removeEntry: doesn't know "/dev" 
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: Permiso denegado
QFileSystemWatcher: failed to add paths: /var/log/audit
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: Permiso denegado
QFileSystemWatcher: failed to add paths: /var/log/krb5
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: Permiso denegado
QFileSystemWatcher: failed to add paths: /var/log/news
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: Permiso denegado
QFileSystemWatcher: failed to add paths: /var/log/samba
QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: Permiso denegado
QFileSystemWatcher: failed to add paths: /var/log/YaST2
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
plasma-desktop(1257)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application 
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x44000ed
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x4400015
Lo de super usuario o comando su o root tambien lo hice y nada de nada.
__________________
Responder Citando
Respuesta

Marcadores


(0 miembros y 1 visitantes)
 
Herramientas
Desplegado

Normas de Publicación
No puedes crear nuevos temas
No puedes responder mensajes
No puedes subir archivos adjuntos
No puedes editar tus mensajes

Los Códigos BB están Activado
Las Caritas están Activado
[IMG] está Activado
El Código HTML está Activado

Ir al Foro

Temas Similares
Tema Autor Foro Respuestas Último mensaje
Otro "The following 48 package updates will NOT be installed" al actualizar openSUSE moshpirit Software 12 01-mar-2015 22:39
Intalando agente NRPE en suseserver 10 64bits prubilar Seguridad y Servidores 4 27-abr-2012 18:40
Propuesta de traduccion para el foro DiabloRojo El Contubernio 74 01-nov-2011 09:57
Pequeño problema tras actualización a openSUSE 11.2 sruedat Instalación y Actualizaciones 2 16-mar-2010 17:57
openSuse no inicia, he cambiado la tabla de particiones [SOLUCIONADO] jncruces General OpenSUSE 16 31-ago-2007 20:39



Síguenos en Twitter Suscríbete a nuestras noticias Acompáñanos en Facebook


La franja horaria es GMT +2. Ahora son las 18:22.
Powered by vBulletin™
Copyright © vBulletin Solutions, Inc. All rights reserved.

Esta página está bajo una licencia de Creative Commons, salvo que no se indique lo contrario.
Creative Commons License

Valid CSS!

Diseño por:Designed by: vbdesigns.devbdesigns.de 
Contáctenos - ForoSUSE - Archivo - Declaración de Privacidad - Arriba