Registrarse
Home
Foros
Miembros
Calendario
Normas
Ayuda

Foros de usuarios de openSUSE
Retroceder   ForoSUSE > Zona OpenSUSE > Hardware


Síguenos en Twitter Suscríbete a nuestras noticias Acompáñanos en Facebook

Respuesta
 
Herramientas Desplegado

Gigabyte z77-ud5h y sonido ALC898
  #1  
Antiguo 03-ene-2014, 00:52
djdevil666bcn djdevil666bcn está desconectado
Aforado
 
Fecha de Ingreso: 31-diciembre-2013
Versión: 13.1
Mensajes: 24
Agradecimientos: 2
Agradecido 2 Veces en 2 Mensajes
Poder de Credibilidad: 0
djdevil666bcn está en el buen camino
Question Gigabyte z77-ud5h y sonido ALC898

Hola! mi primera piedra con esta distribución esta siendo la gráfica y la segunda el sonido.

Tengo una mobo gigabyte z77-ud5h con codec de sonido Realtek ALC898 (HDaudio).

Pues he buscado mucho sobre como poner el driver de esta controladora de audio y no lo logro.

Si bajo el driver de la pagina de realtek y hago lo de:

1- ./configure
2- make
3- make install
4- reboot
5- alsamixer

Me sale todo bien, pero en el paso 5 pulsando F6 no veo la tarjeta de sonido (solo veo la nvdia y intel, que es el audio por hdmi de las graficas)

os pongo la salida de dmesg:

Código:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.6-4-desktop (geeko@buildhost) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #1 SMP PREEMPT Wed Oct 30 18:04:56 UTC 2013 (e6d4a27)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.11.6-4-desktop root=UUID=9625c74e-570a-427b-b2a3-6a0dc77de13e resume=/dev/disk/by-id/ata-ST9500420ASG_5VJ8KB38-part1 splash=silent quiet showopts
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000091bff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000091c00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000008ceabfff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ceac000-0x000000008d902fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008d903000-0x000000008d903fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008d904000-0x000000008da31fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008da32000-0x000000008e265fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008e266000-0x000000008e266fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008e267000-0x000000008e2a9fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008e2aa000-0x000000008ec6bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ec6c000-0x000000008efd6fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008efd7000-0x000000008effffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf800000-0x00000000cf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77X-UD5H, BIOS F14 08/22/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x42f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DBFFF write-protect
[    0.000000]   DC000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask C00000000 write-back
[    0.000000]   1 base 400000000 mask FE0000000 write-back
[    0.000000]   2 base 420000000 mask FF0000000 write-back
[    0.000000]   3 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   4 base 0A0000000 mask FE0000000 uncachable
[    0.000000]   5 base 090000000 mask FF0000000 uncachable
[    0.000000]   6 base 08F800000 mask FFF800000 uncachable
[    0.000000]   7 base 42F800000 mask FFF800000 uncachable
[    0.000000]   8 base 42F600000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0x8f800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x8f000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd830-0x000fd83f] mapped at [ffff8800000fd830]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fb3000, 0x01fb3fff] PGTABLE
[    0.000000] BRK [0x01fb4000, 0x01fb4fff] PGTABLE
[    0.000000] BRK [0x01fb5000, 0x01fb5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x42f400000-0x42f5fffff]
[    0.000000]  [mem 0x42f400000-0x42f5fffff] page 2M
[    0.000000] BRK [0x01fb6000, 0x01fb6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x42c000000-0x42f3fffff]
[    0.000000]  [mem 0x42c000000-0x42f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x400000000-0x42bffffff]
[    0.000000]  [mem 0x400000000-0x42bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0x8ceabfff]
[    0.000000]  [mem 0x40200000-0x8cdfffff] page 2M
[    0.000000]  [mem 0x8ce00000-0x8ceabfff] page 4k
[    0.000000] BRK [0x01fb7000, 0x01fb7fff] PGTABLE
[    0.000000] BRK [0x01fb8000, 0x01fb8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x8e266000-0x8e266fff]
[    0.000000]  [mem 0x8e266000-0x8e266fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x8e2aa000-0x8ec6bfff]
[    0.000000]  [mem 0x8e2aa000-0x8e3fffff] page 4k
[    0.000000]  [mem 0x8e400000-0x8ebfffff] page 2M
[    0.000000]  [mem 0x8ec00000-0x8ec6bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x8efd7000-0x8effffff]
[    0.000000]  [mem 0x8efd7000-0x8effffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[    0.000000]  [mem 0x100000000-0x3ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x34188000-0x360bbfff]
[    0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 000000008d96f070 00064 (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 000000008d97a5f0 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 000000008d96f170 0B47F (v02 ALASKA    A M I 00000012 INTL 20051117)
[    0.000000] ACPI: FACS 000000008da30f80 00040
[    0.000000] ACPI: APIC 000000008d97a6e8 00092 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 000000008d97a780 0003C (v01                 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 000000008d97a7c0 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 000000008d97a7f8 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 000000008d97ab68 009AA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 000000008d97b518 00A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: MATS 000000008d97bfb0 00034 (v02 ALASKA    A M I 00000002 w?x2 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x42f5fffff]
[    0.000000]   NODE_DATA [mem 0x42f5dc000-0x42f5effff]
[    0.000000]  [ffffea0000000000-ffffea000ebfffff] PMD -> [ffff88041fc00000-ffff88042cffffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x42f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00090fff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0x8ceabfff]
[    0.000000]   node   0: [mem 0x8e266000-0x8e266fff]
[    0.000000]   node   0: [mem 0x8e2aa000-0x8ec6bfff]
[    0.000000]   node   0: [mem 0x8efd7000-0x8effffff]
[    0.000000]   node   0: [mem 0x100000000-0x42f5fffff]
[    0.000000] On node 0 totalpages: 3918376
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 144 pages reserved
[    0.000000]   DMA zone: 3984 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7857 pages used for memmap
[    0.000000]   DMA32 zone: 574616 pages, LIFO batch:31
[    0.000000]   Normal zone: 45661 pages used for memmap
[    0.000000]   Normal zone: 3339776 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ceac000-0x8d902fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8d903000-0x8d903fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8d904000-0x8da31fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8da32000-0x8e265fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8e267000-0x8e2a9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ec6c000-0x8efd6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8f000000-0xcf7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xcf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x8f000000-0xcf7fffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88042f200000 s83584 r8192 d22912 u262144
[    0.000000] pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3864658
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.6-4-desktop root=UUID=9625c74e-570a-427b-b2a3-6a0dc77de13e resume=/dev/disk/by-id/ata-ST9500420ASG_5VJ8KB38-part1 splash=silent quiet showopts
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 15340440K/15673504K available (5870K kernel code, 778K rwdata, 4368K rodata, 1332K init, 1640K bss, 333064K reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-511.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 62914560 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 3403.462 MHz processor
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6806.92 BogoMIPS (lpj=3403462)
[    0.000003] pid_max: default: 32768 minimum: 301
[    0.000029] Security Framework initialized
[    0.000037] AppArmor: AppArmor initialized
[    0.000656] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.002901] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.003881] Mount-cache hash table entries: 256
[    0.003993] Initializing cgroup subsys memory
[    0.004000] Initializing cgroup subsys devices
[    0.004001] Initializing cgroup subsys freezer
[    0.004002] Initializing cgroup subsys net_cls
[    0.004003] Initializing cgroup subsys blkio
[    0.004004] Initializing cgroup subsys perf_event
[    0.004005] Initializing cgroup subsys hugetlb
[    0.004030] CPU: Physical Processor ID: 0
[    0.004031] CPU: Processor Core ID: 0
[    0.004034] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.004036] mce: CPU supports 9 MCE banks
[    0.004045] CPU0: Thermal monitoring enabled (TM1)
[    0.004053] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[    0.004118] Freeing SMP alternatives memory: 24K (ffffffff81e11000 - ffffffff81e17000)
[    0.004861] ACPI: Core revision 20130517
[    0.010291] ACPI: All ACPI Tables successfully acquired
[    0.021938] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.031944] smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07)
[    0.031949] TSC deadline timer enabled
[    0.031954] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.031959] ... version:                3
[    0.031960] ... bit width:              48
[    0.031961] ... generic registers:      4
[    0.031962] ... value mask:             0000ffffffffffff
[    0.031962] ... max period:             0000ffffffffffff
[    0.031963] ... fixed-purpose events:   3
[    0.031964] ... event mask:             000000070000000f
[    0.055346] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.042071] smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 OK
[    0.147179] Brought up 8 CPUs
[    0.147182] smpboot: Total of 8 processors activated (54455.39 BogoMIPS)
[    0.153088] devtmpfs: initialized
[    0.154260] PM: Registering ACPI NVS region [mem 0x8d904000-0x8da31fff] (1236992 bytes)
[    0.154279] PM: Registering ACPI NVS region [mem 0x8e267000-0x8e2a9fff] (274432 bytes)
[    0.154389] RTC time: 23:54:26, date: 01/02/14
[    0.154421] NET: Registered protocol family 16
[    0.154503] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.154504] ACPI: bus type PCI registered
[    0.154505] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.154541] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.154543] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.159446] PCI: Using configuration type 1 for base access
[    0.160163] bio: create slab <bio-0> at 0
[    0.160257] ACPI: Added _OSI(Module Device)
[    0.160258] ACPI: Added _OSI(Processor Device)
[    0.160259] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.160260] ACPI: Added _OSI(Processor Aggregator Device)
[    0.161442] ACPI: EC: Look up EC in DSDT
[    0.162742] ACPI: Executed 1 blocks of module-level executable AML code
[    0.168438] ACPI: SSDT 000000008d8a5018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.168750] ACPI: Dynamic OEM Table Load:
[    0.168752] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.171245] ACPI: SSDT 000000008d8a6a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.171591] ACPI: Dynamic OEM Table Load:
[    0.171593] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.174084] ACPI: SSDT 000000008d8b2c18 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.174386] ACPI: Dynamic OEM Table Load:
[    0.174387] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.178349] ACPI: Interpreter enabled
[    0.178354] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[    0.178357] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.178367] ACPI: (supports S0 S3 S4 S5)
[    0.178368] ACPI: Using IOAPIC for interrupt routing
[    0.178391] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.178524] ACPI: No dock devices found.
[    0.185659] ACPI: Power Resource [FN00] (off)
[    0.185731] ACPI: Power Resource [FN01] (off)
[    0.185800] ACPI: Power Resource [FN02] (off)
[    0.185869] ACPI: Power Resource [FN03] (off)
[    0.185937] ACPI: Power Resource [FN04] (off)
[    0.186539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.186780] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.187023] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
[    0.187737] PCI host bridge to bus 0000:00
[    0.187739] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.187740] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.187741] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.187743] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.187744] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.187745] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.187746] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.187747] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
[    0.187753] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.187831] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.187853] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.187900] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.187925] pci 0000:00:02.0: [8086:0122] type 00 class 0x038000
[    0.187933] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.187937] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.187940] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.188034] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.188054] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[    0.188119] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.188170] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.188195] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.188216] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b00f 64bit]
[    0.188285] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.188364] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[    0.188380] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[    0.188387] pci 0000:00:19.0: reg 0x14: [mem 0xf7d39000-0xf7d39fff]
[    0.188394] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.188451] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.188503] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.188529] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.188548] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d38000-0xf7d383ff]
[    0.188632] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.188697] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.188724] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.188737] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
[    0.188798] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.188851] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.188874] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.188947] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.189004] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.189028] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.189100] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.189154] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.189179] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.189251] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.189306] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.189330] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[    0.189401] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.189456] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.189479] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
[    0.189551] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.189605] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.189628] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[    0.189700] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.189754] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.189783] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.189802] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d37000-0xf7d373ff]
[    0.189886] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.189950] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.189978] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[    0.190144] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
[    0.190160] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.190166] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.190173] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.190179] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.190186] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.190192] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d36000-0xf7d367ff]
[    0.190232] pci 0000:00:1f.2: PME# supported from D3hot
[    0.190298] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.190311] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d35000-0xf7d350ff 64bit]
[    0.190330] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.190439] pci 0000:01:00.0: [10de:1183] type 00 class 0x030000
[    0.190448] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.190457] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.190466] pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
[    0.190472] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.190478] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.190542] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[    0.190550] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.192001] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.192005] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.192008] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.192013] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[    0.192096] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.192173] pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
[    0.192190] pci 0000:03:00.0: reg 0x10: [io  0xd040-0xd047]
[    0.192202] pci 0000:03:00.0: reg 0x14: [io  0xd030-0xd033]
[    0.192213] pci 0000:03:00.0: reg 0x18: [io  0xd020-0xd027]
[    0.192225] pci 0000:03:00.0: reg 0x1c: [io  0xd010-0xd013]
[    0.192236] pci 0000:03:00.0: reg 0x20: [io  0xd000-0xd00f]
[    0.192248] pci 0000:03:00.0: reg 0x24: [mem 0xf7c10000-0xf7c101ff]
[    0.192260] pci 0000:03:00.0: reg 0x30: [mem 0xf7c00000-0xf7c0ffff pref]
[    0.192316] pci 0000:03:00.0: PME# supported from D3hot
[    0.192341] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.194004] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.194009] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.194014] pci 0000:00:1c.1:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.194117] pci 0000:04:00.0: [168c:0034] type 00 class 0x028000
[    0.194142] pci 0000:04:00.0: reg 0x10: [mem 0xf7b00000-0xf7b7ffff 64bit]
[    0.194203] pci 0000:04:00.0: reg 0x30: [mem 0xf7b80000-0xf7b8ffff pref]
[    0.194266] pci 0000:04:00.0: supports D1 D2
[    0.194267] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.194297] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.196010] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.196017] pci 0000:00:1c.3:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.196127] pci 0000:05:00.0: [8086:244e] type 01 class 0x060401
[    0.196282] pci 0000:05:00.0: supports D1 D2
[    0.196283] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196309] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.196326] pci 0000:00:1c.5: PCI bridge to [bus 05-06] (subtractive decode)
[    0.196329] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.196332] pci 0000:00:1c.5:   bridge window [mem 0xf7a00000-0xf7afffff]
[    0.196337] pci 0000:00:1c.5:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.196339] pci 0000:00:1c.5:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.196340] pci 0000:00:1c.5:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.196341] pci 0000:00:1c.5:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.196342] pci 0000:00:1c.5:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.196343] pci 0000:00:1c.5:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.196344] pci 0000:00:1c.5:   bridge window [mem 0xcfa00000-0xfeafffff] (subtractive decode)
[    0.196439] pci 0000:06:00.0: [1131:7133] type 00 class 0x048000
[    0.196474] pci 0000:06:00.0: reg 0x10: [mem 0xf7a01000-0xf7a017ff]
[    0.196642] pci 0000:06:00.0: supports D1 D2
[    0.196685] pci 0000:06:01.0: [1106:3044] type 00 class 0x0c0010
[    0.196720] pci 0000:06:01.0: reg 0x10: [mem 0xf7a00000-0xf7a007ff]
[    0.196740] pci 0000:06:01.0: reg 0x14: [io  0xc000-0xc07f]
[    0.196891] pci 0000:06:01.0: supports D2
[    0.196893] pci 0000:06:01.0: PME# supported from D2 D3hot D3cold
[    0.197003] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode)
[    0.197014] pci 0000:05:00.0:   bridge window [io  0xc000-0xcfff]
[    0.197020] pci 0000:05:00.0:   bridge window [mem 0xf7a00000-0xf7afffff]
[    0.197031] pci 0000:05:00.0:   bridge window [io  0xc000-0xcfff] (subtractive decode)
[    0.197032] pci 0000:05:00.0:   bridge window [mem 0xf7a00000-0xf7afffff] (subtractive decode)
[    0.197033] pci 0000:05:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.197034] pci 0000:05:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.197036] pci 0000:05:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.197037] pci 0000:05:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.197038] pci 0000:05:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.197039] pci 0000:05:00.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.197040] pci 0000:05:00.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.197041] pci 0000:05:00.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.197043] pci 0000:05:00.0:   bridge window [mem 0xcfa00000-0xfeafffff] (subtractive decode)
[    0.197129] pci 0000:07:00.0: [1969:1083] type 00 class 0x020000
[    0.197155] pci 0000:07:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
[    0.197169] pci 0000:07:00.0: reg 0x18: [io  0xb000-0xb07f]
[    0.197292] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.197323] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.199022] pci 0000:00:1c.6: PCI bridge to [bus 07]
[    0.199027] pci 0000:00:1c.6:   bridge window [io  0xb000-0xbfff]
[    0.199031] pci 0000:00:1c.6:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.199116] pci 0000:00:1c.7: PCI bridge to [bus 08]
[    0.199119] pci 0000:00:1c.7:   bridge window [io  0xa000-0xafff]
[    0.199122] pci 0000:00:1c.7:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.199153] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.199601] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.199657] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.199711] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.199765] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.199819] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.199872] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.199926] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.199980] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.200151] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.200156] ACPI: \_SB_.PCI0: notify handler is installed
[    0.200207] Found 1 acpi root devices
[    0.200256] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.200257] vgaarb: loaded
[    0.200258] vgaarb: bridge control possible 0000:01:00.0
[    0.200318] SCSI subsystem initialized
[    0.200320] ACPI: bus type ATA registered
[    0.200349] libata version 3.00 loaded.
[    0.200352] ACPI: bus type USB registered
[    0.200364] usbcore: registered new interface driver usbfs
[    0.200369] usbcore: registered new interface driver hub
[    0.200388] usbcore: registered new device driver usb
[    0.200432] PCI: Using ACPI for IRQ routing
[    0.201764] PCI: pci_cache_line_size set to 64 bytes
[    0.201832] e820: reserve RAM buffer [mem 0x00091c00-0x0009ffff]
[    0.201833] e820: reserve RAM buffer [mem 0x8ceac000-0x8fffffff]
[    0.201834] e820: reserve RAM buffer [mem 0x8e267000-0x8fffffff]
[    0.201835] e820: reserve RAM buffer [mem 0x8ec6c000-0x8fffffff]
[    0.201836] e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff]
[    0.201837] e820: reserve RAM buffer [mem 0x42f600000-0x42fffffff]
[    0.201892] NetLabel: Initializing
[    0.201893] NetLabel:  domain hash size = 128
[    0.201894] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.201901] NetLabel:  unlabeled traffic allowed by default
[    0.201919] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.201923] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.203942] Switched to clocksource hpet
[    0.205180] AppArmor: AppArmor Filesystem Enabled
[    0.205191] pnp: PnP ACPI init
[    0.205197] ACPI: bus type PNP registered
[    0.205244] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.205246] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.205255] pnp 00:01: [dma 4]
[    0.205264] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.205278] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.205353] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.205387] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.205388] system 00:04: [io  0x0200-0x020f] has been reserved
[    0.205390] system 00:04: [io  0xffff] has been reserved
[    0.205391] system 00:04: [io  0xffff] has been reserved
[    0.205393] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.205394] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.205395] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.205397] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.205415] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.205453] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.205455] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.205576] system 00:07: [io  0x0a00-0x0a0f] has been reserved
[    0.205578] system 00:07: [io  0x0a30-0x0a3f] has been reserved
[    0.205579] system 00:07: [io  0x0a20-0x0a2f] has been reserved
[    0.205581] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.205641] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.205643] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.205660] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.205912] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.205913] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.205915] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.205916] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.205918] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.205919] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.205920] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.205922] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.205923] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[    0.205924] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.205926] system 00:0a: [mem 0xcfa00000-0xcfa00fff] has been reserved
[    0.205927] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206091] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[    0.206093] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
[    0.206094] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.206112] pnp: PnP ACPI: found 12 devices
[    0.206112] ACPI: bus type PNP unregistered
[    0.211907] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.211909] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.211911] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.211913] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[    0.211915] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.211925] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.211927] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.211931] pci 0000:00:1c.1:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.211938] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.211942] pci 0000:00:1c.3:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.211952] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.211956] pci 0000:05:00.0:   bridge window [io  0xc000-0xcfff]
[    0.211964] pci 0000:05:00.0:   bridge window [mem 0xf7a00000-0xf7afffff]
[    0.211979] pci 0000:00:1c.5: PCI bridge to [bus 05-06]
[    0.211981] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.211985] pci 0000:00:1c.5:   bridge window [mem 0xf7a00000-0xf7afffff]
[    0.211992] pci 0000:00:1c.6: PCI bridge to [bus 07]
[    0.211994] pci 0000:00:1c.6:   bridge window [io  0xb000-0xbfff]
[    0.211998] pci 0000:00:1c.6:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.212005] pci 0000:00:1c.7: PCI bridge to [bus 08]
[    0.212007] pci 0000:00:1c.7:   bridge window [io  0xa000-0xafff]
[    0.212011] pci 0000:00:1c.7:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.212334] pci 0000:05:00.0: setting latency timer to 64
[    0.212396] pci 0000:00:1c.7: enabling device (0000 -> 0003)
[    0.212453] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.212454] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.212456] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.212457] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff]
[    0.212458] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
[    0.212459] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff]
[    0.212460] pci_bus 0000:00: resource 10 [mem 0xcfa00000-0xfeafffff]
[    0.212461] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.212462] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.212463] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
[    0.212465] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.212466] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.212467] pci_bus 0000:04: resource 1 [mem 0xf7b00000-0xf7bfffff]
[    0.212468] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.212469] pci_bus 0000:05: resource 1 [mem 0xf7a00000-0xf7afffff]
[    0.212470] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.212471] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.212473] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.212474] pci_bus 0000:05: resource 7 [mem 0x000dc000-0x000dffff]
[    0.212475] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000e3fff]
[    0.212476] pci_bus 0000:05: resource 9 [mem 0x000e4000-0x000e7fff]
[    0.212477] pci_bus 0000:05: resource 10 [mem 0xcfa00000-0xfeafffff]
[    0.212478] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[    0.212479] pci_bus 0000:06: resource 1 [mem 0xf7a00000-0xf7afffff]
[    0.212480] pci_bus 0000:06: resource 4 [io  0xc000-0xcfff]
[    0.212481] pci_bus 0000:06: resource 5 [mem 0xf7a00000-0xf7afffff]
[    0.212483] pci_bus 0000:06: resource 8 [io  0x0000-0x0cf7]
[    0.212484] pci_bus 0000:06: resource 9 [io  0x0d00-0xffff]
[    0.212485] pci_bus 0000:06: resource 10 [mem 0x000a0000-0x000bffff]
[    0.212486] pci_bus 0000:06: resource 11 [mem 0x000dc000-0x000dffff]
[    0.212487] pci_bus 0000:06: resource 12 [mem 0x000e0000-0x000e3fff]
[    0.212488] pci_bus 0000:06: resource 13 [mem 0x000e4000-0x000e7fff]
[    0.212489] pci_bus 0000:06: resource 14 [mem 0xcfa00000-0xfeafffff]
[    0.212490] pci_bus 0000:07: resource 0 [io  0xb000-0xbfff]
[    0.212491] pci_bus 0000:07: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.212492] pci_bus 0000:08: resource 0 [io  0xa000-0xafff]
[    0.212494] pci_bus 0000:08: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.212563] NET: Registered protocol family 2
[    0.212786] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.213031] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.213120] TCP: Hash tables configured (established 131072 bind 65536)
[    0.213131] TCP: reno registered
[    0.213143] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.213183] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.213277] NET: Registered protocol family 1
[    0.213710] pci 0000:01:00.0: Boot video device
[    0.213735] PCI: CLS 64 bytes, default 64
[    0.213767] Unpacking initramfs...
[    0.479328] Freeing initrd memory: 31952K (ffff880034188000 - ffff8800360bc000)
[    0.479331] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.479333] software IO TLB [mem 0x88eac000-0x8ceac000] (64MB) mapped at [ffff880088eac000-ffff88008ceabfff]
[    0.479724] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
[    0.479729] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
[    0.479733] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
[    0.479738] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
[    0.479742] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x28
[    0.479746] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x28
[    0.479750] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x28
[    0.479755] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x28
[    0.479776] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.479777] Scanning for low memory corruption every 60 seconds
[    0.479958] audit: initializing netlink socket (disabled)
[    0.479966] type=2000 audit(1388706865.454:1): initialized
[    0.492839] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.493224] zbud: loaded
[    0.493392] VFS: Disk quotas dquot_6.5.2
[    0.493415] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.493634] msgmni has been set to 30024
[    0.493828] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.493865] io scheduler noop registered
[    0.493866] io scheduler deadline registered
[    0.493889] io scheduler cfq registered (default)
[    0.493947] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.494163] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.494172] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.494197] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.494197] vesafb: scrolling: redraw
[    0.494199] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.494304] vesafb: framebuffer at 0xe9000000, mapped to 0xffffc90005c00000, using 1216k, total 1216k
[    0.506626] Console: switching to colour frame buffer device 80x30
[    0.518906] fb0: VESA VGA frame buffer device
[    0.518912] intel_idle: MWAIT substates: 0x1120
[    0.518913] intel_idle: v0.4 model 0x2A
[    0.518913] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.518950] GHES: HEST is not enabled!
[    0.518975] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[    0.519938] Non-volatile memory driver v1.3
[    0.519939] Linux agpgart interface v0.103
[    0.520060] mei_me 0000:00:16.0: setting latency timer to 64
[    0.520084] mei_me 0000:00:16.0: irq 41 for MSI/MSI-X
[    0.523318] ahci 0000:00:1f.2: version 3.0
[    0.523396] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    0.534105] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
[    0.534108] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    0.534110] ahci 0000:00:1f.2: setting latency timer to 64
[    0.544316] scsi0 : ahci
[    0.544381] scsi1 : ahci
[    0.544417] scsi2 : ahci
[    0.544455] scsi3 : ahci
[    0.544491] scsi4 : ahci
[    0.544525] scsi5 : ahci
[    0.544592] ata1: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36100 irq 42
[    0.544594] ata2: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36180 irq 42
[    0.544595] ata3: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36200 irq 42
[    0.544597] ata4: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36280 irq 42
[    0.544598] ata5: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36300 irq 42
[    0.544600] ata6: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36380 irq 42
[    0.544671] ahci 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.544744] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    0.544746] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    0.544912] scsi6 : ahci
[    0.544949] scsi7 : ahci
[    0.544970] ata7: SATA max UDMA/133 abar m512@0xf7c10000 port 0xf7c10100 irq 43
[    0.544972] ata8: SATA max UDMA/133 abar m512@0xf7c10000 port 0xf7c10180 irq 43
[    0.544983] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.544984] ehci-pci: EHCI PCI platform driver
[    0.545065] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.545070] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.545073] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.545090] ehci-pci 0000:00:1a.0: debug port 2
[    0.548975] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.548985] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d38000
[    0.554089] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.554102] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.554103] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.554104] usb usb1: Product: EHCI Host Controller
[    0.554105] usb usb1: Manufacturer: Linux 3.11.6-4-desktop ehci_hcd
[    0.554106] usb usb1: SerialNumber: 0000:00:1a.0
[    0.554171] hub 1-0:1.0: USB hub found
[    0.554174] hub 1-0:1.0: 2 ports detected
[    0.554317] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.554322] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.554325] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.554335] ehci-pci 0000:00:1d.0: debug port 2
[    0.558226] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.558236] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d37000
[    0.564093] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.564102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.564104] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.564105] usb usb2: Product: EHCI Host Controller
[    0.564106] usb usb2: Manufacturer: Linux 3.11.6-4-desktop ehci_hcd
[    0.564107] usb usb2: SerialNumber: 0000:00:1d.0
[    0.564161] hub 2-0:1.0: USB hub found
[    0.564164] hub 2-0:1.0: 2 ports detected
[    0.564236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.564237] uhci_hcd: USB Universal Host Controller Interface driver
[    0.564272] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.564628] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.564631] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.564688] mousedev: PS/2 mouse device common for all mice
[    0.564757] rtc_cmos 00:05: RTC can wake from S4
[    0.564860] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.564885] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.564891] Intel P-state driver initializing.
[    0.564897] Intel pstate controlling: cpu 0
[    0.564906] Intel pstate controlling: cpu 1
[    0.564912] Intel pstate controlling: cpu 2
[    0.564919] Intel pstate controlling: cpu 3
[    0.564925] Intel pstate controlling: cpu 4
[    0.564931] Intel pstate controlling: cpu 5
[    0.564940] Intel pstate controlling: cpu 6
[    0.564947] Intel pstate controlling: cpu 7
[    0.565044] cpuidle: using governor ladder
[    0.565164] cpuidle: using governor menu
[    0.565168] ledtrig-cpu: registered to indicate activity on CPUs
[    0.565176] hidraw: raw HID events driver (C) Jiri Kosina
[    0.565216] usbcore: registered new interface driver usbhid
[    0.565217] usbhid: USB HID core driver
[    0.565280] TCP: cubic registered
[    0.565395] NET: Registered protocol family 10
[    0.565526] Key type dns_resolver registered
[    0.565710] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST9500420ASG_5VJ8KB38-part1
[    0.849298] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.849329] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.849350] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.849370] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.849387] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.849403] ata5: SATA link down (SStatus 0 SControl 300)
[    0.849760] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.849767] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88041bcce740), AE_NOT_FOUND (20130517/psparse-536)
[    0.849930] ata6.00: ATA-9: M4-CT064M4SSD3, 07MH, max UDMA/100
[    0.849943] ata6.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.850420] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.850427] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88041bcce740), AE_NOT_FOUND (20130517/psparse-536)
[    0.850538] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.850543] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88041bcce830), AE_NOT_FOUND (20130517/psparse-536)
[    0.850623] ata6.00: configured for UDMA/100
[    0.850959] ata4.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133
[    0.850964] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.852650] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.852657] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88041bcce830), AE_NOT_FOUND (20130517/psparse-536)
[    0.853056] ata4.00: configured for UDMA/133
[    0.855018] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.855026] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88041bcce920), AE_NOT_FOUND (20130517/psparse-536)
[    0.855507] ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[    0.855512] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.855921] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.855928] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88041bcce8a8), AE_NOT_FOUND (20130517/psparse-536)
[    0.855939] ata3.00: ATAPI: ATAPI   iHBS112   2, PL05, max UDMA/100
[    0.856237] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.856544] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.856552] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88041bcce998), AE_NOT_FOUND (20130517/psparse-536)
[    0.857453] ata1.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[    0.857458] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.857570] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.857578] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88041bcce8a8), AE_NOT_FOUND (20130517/psparse-536)
[    0.857590] ata3.00: configured for UDMA/100
[    0.861302] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.861309] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88041bcce920), AE_NOT_FOUND (20130517/psparse-536)
[    0.861546] ata2.00: configured for UDMA/133
[    0.864831] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
[    0.864838] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88041bcce998), AE_NOT_FOUND (20130517/psparse-536)
[    0.865506] ata1.00: configured for UDMA/133
[    0.865754] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[    0.865975] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    0.865978] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.866135] scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[    0.866233] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    0.866236] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    0.866254] sd 0:0:0:0: [sda] Write Protect is off
[    0.866257] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.866282] sd 1:0:0:0: [sdb] Write Protect is off
[    0.866284] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.866298] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.866301] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.870659] scsi 2:0:0:0: CD-ROM            ATAPI    iHBS112   2      PL05 PQ: 0 ANSI: 5
[    0.871070] scsi 3:0:0:0: Direct-Access     ATA      ST9500420ASG     0002 PQ: 0 ANSI: 5
[    0.871172] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.871227] sd 3:0:0:0: [sdc] Write Protect is off
[    0.871229] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    0.871243] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.871355] scsi 5:0:0:0: Direct-Access     ATA      M4-CT064M4SSD3   07MH PQ: 0 ANSI: 5
[    0.871473] sd 5:0:0:0: [sdd] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    0.871525] sd 5:0:0:0: [sdd] Write Protect is off
[    0.871535] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    0.871548] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.871974]  sdd: sdd1
[    0.872228] sd 5:0:0:0: [sdd] Attached SCSI disk
[    0.881045]  sda: sda1 sda2 sda3
[    0.881998] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.887788]  sdb: sdb1
[    0.887819]  sdc: sdc1 sdc2
[    0.888105] sd 1:0:0:0: [sdb] Attached SCSI disk
[    0.888176] sd 3:0:0:0: [sdc] Attached SCSI disk
[    0.970742] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.970747] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.971034] hub 1-1:1.0: USB hub found
[    0.971268] hub 1-1:1.0: 6 ports detected
[    1.004338] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.004363] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.008422] ata8.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[    1.008426] ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.010104] ata7.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[    1.010108] ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.012425] ata8.00: configured for UDMA/133
[    1.016147] ata7.00: configured for UDMA/133
[    1.016333] scsi 6:0:0:0: Direct-Access     ATA      WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[    1.016453] sd 6:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.016456] sd 6:0:0:0: [sde] 4096-byte physical blocks
[    1.016499] sd 6:0:0:0: [sde] Write Protect is off
[    1.016503] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    1.016532] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.016716] scsi 7:0:0:0: Direct-Access     ATA      WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[    1.016935] sd 7:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.016938] sd 7:0:0:0: [sdf] 4096-byte physical blocks
[    1.017243] sd 7:0:0:0: [sdf] Write Protect is off
[    1.017256] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[    1.017379] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.035046]  sde: sde1
[    1.035332] sd 6:0:0:0: [sde] Attached SCSI disk
[    1.037701]  sdf: sdf1 sdf2 sdf3
[    1.038767] sd 7:0:0:0: [sdf] Attached SCSI disk
[    1.038790] PM: Hibernation image not present or could not be loaded.
[    1.038810] registered taskstats version 1
[    1.039695]   Magic number: 14:449:958
[    1.039831] rtc_cmos 00:05: setting system clock to 2014-01-02 23:54:26 UTC (1388706866)
[    1.040861] Freeing unused kernel memory: 1332K (ffffffff81cc4000 - ffffffff81e11000)
[    1.040863] Write protecting the kernel read-only data: 12288k
[    1.041812] Freeing unused kernel memory: 264K (ffff8800015be000 - ffff880001600000)
[    1.045549] Freeing unused kernel memory: 1776K (ffff880001a44000 - ffff880001c00000)
[    1.071225] device-mapper: uevent: version 1.0.3
[    1.071305] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    1.074299] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.076265] emc: device handler registered
[    1.077071] rdac: device handler registered
[    1.077895] alua: device handler registered
[    1.078681] hp_sw: device handler registered
[    1.080941] systemd-udevd[177]: starting version 208
[    1.087515] ACPI: Requesting acpi_cpufreq
[    1.112521] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.112525] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.112530] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.112624] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.112642] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[    1.112690] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.112692] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.112693] usb usb3: Product: xHCI Host Controller
[    1.112694] usb usb3: Manufacturer: Linux 3.11.6-4-desktop xhci_hcd
[    1.112695] usb usb3: SerialNumber: 0000:00:14.0
[    1.112877] xHCI xhci_add_endpoint called for root hub
[    1.112879] xHCI xhci_check_bandwidth called for root hub
[    1.112903] hub 3-0:1.0: USB hub found
[    1.112911] hub 3-0:1.0: 4 ports detected
[    1.112918] thermal LNXTHERM:00: registered as thermal_zone0
[    1.112921] ACPI: Thermal Zone [TZ00] (28 C)
[    1.113672] thermal LNXTHERM:01: registered as thermal_zone1
[    1.113675] ACPI: Thermal Zone [TZ01] (30 C)
[    1.113756] ACPI: Fan [FAN0] (off)
[    1.113791] ACPI: Fan [FAN1] (off)
[    1.113830] ACPI: Fan [FAN2] (off)
[    1.113865] ACPI: Fan [FAN3] (off)
[    1.113903] ACPI: Fan [FAN4] (off)
[    1.114198] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.114204] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.114226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.114228] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.114229] usb usb4: Product: xHCI Host Controller
[    1.114231] usb usb4: Manufacturer: Linux 3.11.6-4-desktop xhci_hcd
[    1.114232] usb usb4: SerialNumber: 0000:00:14.0
[    1.114299] xHCI xhci_add_endpoint called for root hub
[    1.114300] xHCI xhci_check_bandwidth called for root hub
[    1.114330] hub 4-0:1.0: USB hub found
[    1.114340] hub 4-0:1.0: 4 ports detected
[    1.188655] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.188660] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.188920] hub 2-1:1.0: USB hub found
[    1.189026] hub 2-1:1.0: 8 ports detected
[    1.263436] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    1.402886] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c24a
[    1.402889] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.402891] usb 1-1.1: Product: Gaming Mouse G600
[    1.402892] usb 1-1.1: Manufacturer: Logitech
[    1.402894] usb 1-1.1: SerialNumber: A1EE20D298790012
[    1.408130] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[    1.408247] hid-generic 0003:046D:C24A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-0000:00:1a.0-1.1/input0
[    1.431620] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input1
[    1.431906] hid-generic 0003:046D:C24A.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-0000:00:1a.0-1.1/input1
[    1.481482] tsc: Refined TSC clocksource calibration: 3403.347 MHz
[    1.504560] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[    1.591355] usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0607
[    1.591359] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.591361] usb 1-1.2: Product: USB2.0 Hub
[    1.591871] hub 1-1.2:1.0: USB hub found
[    1.592190] hub 1-1.2:1.0: 4 ports detected
[    1.646584] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
[    1.647236] microcode: CPU0 updated to revision 0x29, date = 2013-06-12
[    1.647278] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
[    1.647608] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
[    1.647626] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
[    1.647904] microcode: CPU2 updated to revision 0x29, date = 2013-06-12
[    1.647940] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
[    1.648160] microcode: CPU3 updated to revision 0x29, date = 2013-06-12
[    1.648197] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x28
[    1.648413] microcode: CPU4 updated to revision 0x29, date = 2013-06-12
[    1.648451] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x28
[    1.648782] microcode: CPU5 updated to revision 0x29, date = 2013-06-12
[    1.648810] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x28
[    1.649156] microcode: CPU6 updated to revision 0x29, date = 2013-06-12
[    1.649175] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x28
[    1.649394] microcode: CPU7 updated to revision 0x29, date = 2013-06-12
[    1.666741] usb 1-1.5: new high-speed USB device number 5 using ehci-pci
[    1.752773] usb 1-1.5: New USB device found, idVendor=2109, idProduct=0810
[    1.752775] usb 1-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.752776] usb 1-1.5: Product: USB2.0 Hub
[    1.753042] hub 1-1.5:1.0: USB hub found
[    1.753271] hub 1-1.5:1.0: 4 ports detected
[    1.832681] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
[    1.918773] usb 1-1.6: New USB device found, idVendor=2109, idProduct=0810
[    1.918775] usb 1-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.918777] usb 1-1.6: Product: USB2.0 Hub
[    1.919083] hub 1-1.6:1.0: USB hub found
[    1.919188] hub 1-1.6:1.0: 4 ports detected
[    2.028955] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
[    2.103297] usb 4-3: New USB device found, idVendor=2109, idProduct=0810
[    2.103302] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.103304] usb 4-3: Product: 4-Port USB 3.0 Hub
[    2.103307] usb 4-3: Manufacturer: VIA Labs, Inc.
[    2.135850] hub 4-3:1.0: USB hub found
[    2.139997] hub 4-3:1.0: 4 ports detected
[    2.291568] usb 4-4: new SuperSpeed USB device number 3 using xhci_hcd
[    2.366126] usb 4-4: New USB device found, idVendor=2109, idProduct=0810
[    2.366131] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.366133] usb 4-4: Product: 4-Port USB 3.0 Hub
[    2.366135] usb 4-4: Manufacturer: VIA Labs, Inc.
[    2.395579] hub 4-4:1.0: USB hub found
[    2.399712] hub 4-4:1.0: 4 ports detected
[    2.482179] Switched to clocksource tsc
[    2.519929] usb 2-1.7: new full-speed USB device number 3 using ehci-pci
[    2.606587] usb 2-1.7: string descriptor 0 read error: -22
[    2.606594] usb 2-1.7: New USB device found, idVendor=04ca, idProduct=3006
[    2.606596] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.670258] usb 1-1.2.1: new low-speed USB device number 7 using ehci-pci
[    2.763151] usb 1-1.2.1: New USB device found, idVendor=046d, idProduct=c228
[    2.763155] usb 1-1.2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.763167] usb 1-1.2.1: Product: G19 Gaming Keyboard
[    2.766388] input: G19 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input2
[    2.766524] hid-generic 0003:046D:C228.0003: input,hidraw2: USB HID v1.10 Keyboard [G19 Gaming Keyboard] on usb-0000:00:1a.0-1.2.1/input0
[    2.766852] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[    2.766855] device-mapper: ioctl: error adding target to table
[    2.767400] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[    2.767402] device-mapper: ioctl: error adding target to table
[    2.767653] bio: create slab <bio-1> at 1
[    2.771911] input: G19 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/input/input3
[    2.771975] hid-generic 0003:046D:C228.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [G19 Gaming Keyboard] on usb-0000:00:1a.0-1.2.1/input1
[    2.845365] usb 1-1.2.2: new high-speed USB device number 8 using ehci-pci
[    2.920216] PM: Marking nosave pages: [mem 0x00091000-0x000fffff]
[    2.920219] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
[    2.920224] PM: Marking nosave pages: [mem 0x40000000-0x401fffff]
[    2.920228] PM: Marking nosave pages: [mem 0x8ceac000-0x8e265fff]
[    2.920269] PM: Marking nosave pages: [mem 0x8e267000-0x8e2a9fff]
[    2.920270] PM: Marking nosave pages: [mem 0x8ec6c000-0x8efd6fff]
[    2.920277] PM: Marking nosave pages: [mem 0x8f000000-0xffffffff]
[    2.920831] PM: Basic memory bitmaps created
[    2.938955] usb 1-1.2.2: New USB device found, idVendor=046d, idProduct=c229
[    2.938957] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.938958] usb 1-1.2.2: Product: G19 Gaming Keyboard
[    2.938959] usb 1-1.2.2: Manufacturer: Logitech
[    2.950175] PM: Basic memory bitmaps freed
[    2.958808] input: Logitech G19 Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.1/input/input4
[    2.959059] hid-generic 0003:046D:C229.0005: input,hiddev0,hidraw4: USB HID v1.11 Keypad [Logitech G19 Gaming Keyboard] on usb-0000:00:1a.0-1.2.2/input1
[    2.999383] PM: Starting manual resume from disk
[    2.999386] PM: Hibernation image partition 8:33 present
[    2.999387] PM: Looking for hibernation image.
[    2.999738] PM: Image not found (code -22)
[    2.999742] PM: Hibernation image not present or could not be loaded.
[    3.084770] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[    3.111375] EXT4-fs (dm-3): re-mounted. Opts: acl,user_xattr
[    3.194061] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    3.214408] systemd[1]: Inserted module 'autofs4'
[    3.214584] systemd[1]: Set hostname to <linux-1ujz>.
[    3.228105] LVM: Activation generator successfully completed.
[    3.281623] systemd[1]: Starting Collect Read-Ahead Data...
[    3.282017] systemd[1]: Starting Replay Read-Ahead Data...
[    3.282207] systemd[1]: Starting System Time Synchronized.
[    3.282228] systemd[1]: Reached target System Time Synchronized.
[    3.282237] systemd[1]: Starting Syslog Socket.
[    3.282269] systemd[1]: Listening on Syslog Socket.
[    3.282277] systemd[1]: Starting Remote File Systems (Pre).
[    3.282305] systemd[1]: Reached target Remote File Systems (Pre).
[    3.282311] systemd[1]: Starting Remote File Systems.
[    3.282330] systemd[1]: Reached target Remote File Systems.
[    3.282336] systemd[1]: Starting Delayed Shutdown Socket.
[    3.282362] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.282366] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.282390] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.282399] systemd[1]: Starting Journal Socket.
[    3.282446] systemd[1]: Listening on Journal Socket.
[    3.282458] systemd[1]: Starting LSB: Set default boot entry if called...
[    3.282663] systemd[1]: Mounting Huge Pages File System...
[    3.282824] systemd[1]: Mounting Debug File System...
[    3.282983] systemd[1]: Starting Create dynamic rule for /dev/root link...
[    3.283172] systemd[1]: Starting Journal Service...
[    3.283363] systemd[1]: Started Journal Service.
[    3.297462] systemd-journald[394]: Vacuuming done, freed 0 bytes
[    3.328517] EXT4-fs (dm-3): re-mounted. Opts: acl,user_xattr
[    3.334564] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.334580] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    3.334595] scsi 2:0:0:0: Attached scsi generic sg2 type 5
[    3.334609] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    3.334623] sd 5:0:0:0: Attached scsi generic sg4 type 0
[    3.334636] sd 6:0:0:0: Attached scsi generic sg5 type 0
[    3.334650] sd 7:0:0:0: Attached scsi generic sg6 type 0
[    3.342090] systemd-udevd[437]: starting version 208
[    3.379786] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[    3.379814] ACPI: Power Button [PWRB]
[    3.379844] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    3.379861] ACPI: Power Button [PWRF]
[    3.380833] wmi: Mapper loaded
[    3.389178] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.389335] pps_core: LinuxPPS API ver. 1 registered
[    3.389336] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.389432] PTP clock support registered
[    3.389783] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    3.389784] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    3.392160] [drm] Initialized drm 1.1.0 20060810
[    3.395494] e1000e 0000:00:19.0: setting latency timer to 64
[    3.395545] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    3.395586] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[    3.400497] acpi device:66: registered as cooling_device13
[    3.400676] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.400705] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    3.406875] cfg80211: Calling CRDA to update world regulatory domain
[    3.417495] atl1c 0000:07:00.0: version 1.0.1.1-NAPI
[    3.424238] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.424241] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.424303] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    3.435301] Bluetooth: Core ver 2.16
[    3.435308] NET: Registered protocol family 31
[    3.435309] Bluetooth: HCI device and connection manager initialized
[    3.435313] Bluetooth: HCI socket layer initialized
[    3.435314] Bluetooth: L2CAP socket layer initialized
[    3.435317] Bluetooth: SCO socket layer initialized
[    3.438292] usbcore: registered new interface driver btusb
[    3.448250] ath: EEPROM regdomain: 0x6a
[    3.448253] ath: EEPROM indicates we should expect a direct regpair map
[    3.448254] ath: Country alpha2 being used: 00
[    3.448254] ath: Regpair used: 0x6a
[    3.453305] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.453417] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90005e00000, irq=19
[    3.461334] usbcore: registered new interface driver ath3k
[    3.466299] firewire_ohci 0000:06:01.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    3.519148] nvidia: module license 'NVIDIA' taints kernel.
[    3.519150] Disabling lock debugging due to kernel taint
[    3.522143] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    3.523527] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    3.523627] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[    3.523632] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.20  Wed Oct 30 17:43:35 PDT 2013
[    3.549864] Linux video capture interface: v2.00
[    3.551656] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[    3.551743] saa7133[0]: found at 0000:06:00.0, rev: 209, irq: 17, latency: 32, mmio: 0xf7a01000
[    3.551751] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid TV/Radio (A16D) [card=137,autodetected]
[    3.551766] saa7133[0]: board init: gpio is ee00
[    3.577671] cfg80211: World regulatory domain updated:
[    3.577673] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    3.577675] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.577676] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.577677] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    3.577678] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.577679] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    3.585290] Registered IR keymap rc-avermedia-a16d
[    3.585328] input: saa7134 IR (AVerMedia Hybrid TV as /devices/pci0000:00/0000:00:1c.5/0000:05:00.0/0000:06:00.0/rc/rc0/input9
[    3.585359] rc0: saa7134 IR (AVerMedia Hybrid TV as /devices/pci0000:00/0000:00:1c.5/0000:05:00.0/0000:06:00.0/rc/rc0
[    3.597527] systemd-udevd[466]: renamed network interface eth0 to enp7s0
[    3.606707] Adding 20971516k swap on /dev/sdc1.  Priority:-1 extents:1 across:20971516k FS
[    3.618372] systemd-udevd[464]: renamed network interface wlan0 to wlp4s0
[    3.657810] e1000e 0000:00:19.0 eth0: registered PHC clock
[    3.657812] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 90:2b:34:31:ca:c2
[    3.657813] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    3.657858] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    3.657874] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[    3.657955] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
[    3.657958] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.658007] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[    3.658010] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.658013] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[    3.658015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.658016] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \LED_ 1 (20130517/utaddress-251)
[    3.658018] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20130517/utaddress-251)
[    3.658020] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.658021] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.658513] [drm] Memory usable by graphics device = 2048M
[    3.658514] checking generic (e9000000 130000) vs hw (d0000000 10000000)
[    3.658516] i915 0000:00:02.0: setting latency timer to 64
[    3.659128] iTCO_vendor_support: vendor-support=0
[    3.659230] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    3.659296] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    3.667369] systemd-udevd[454]: renamed network interface eth0 to eno1
[    3.675890] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[    3.675896] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.675897] [drm] Driver supports precise vblank timestamp query.
[    3.693907] [drm] Wrong MCH_SSKPD value: 0x16040307
[    3.693910] [drm] This can cause pipe underruns and display issues.
[    3.693910] [drm] Please upgrade your BIOS to fix this.
[    3.704314] i915 0000:00:02.0: No connectors reported connected with modes
[    3.704317] [drm] Cannot find any crtc or sizes - going 1024x768
[    3.704871] checking generic (e9000000 130000) vs hw (d0000000 10000000)
[    3.704908] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
[    3.704909] i915 0000:00:02.0: registered panic notifier
[    3.704915] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[    3.705047] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[    3.719345] saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00 00 00 00 00 00 00
[    3.719350] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[    3.719353] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff 00 0e ff ff ff ff
[    3.719357] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.719360] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
[    3.719363] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.719367] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.719370] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.719373] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.719376] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.719380] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.719383] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.719386] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.719389] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.719393] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.719396] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    3.722372] tuner 8-0061: Tuner -1 found with type(s) Radio TV.
[    3.723946] xc2028 8-0061: creating new instance
[    3.723948] xc2028 8-0061: type set to XCeive xc2028/xc3028 tuner
[    3.724315] saa7133[0]: registered device video0 [v4l2]
[    3.724328] saa7133[0]: registered device vbi0
[    3.724358] saa7133[0]: registered device radio0
[    3.725833] dvb_init() allocating 1 frontend
[    3.726700] xc2028 8-0061: Could not load firmware xc3028-v27.fw.
[    3.730349] xc2028 8-0061: attaching existing instance
[    3.730350] xc2028 8-0061: type set to XCeive xc2028/xc3028 tuner
[    3.730351] DVB: registering new adapter (saa7133[0])
[    3.730353] saa7134 0000:06:00.0: DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...
[    3.736697] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    3.736732] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    3.736759] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    3.736785] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    3.736810] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    3.736833] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    3.736857] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    3.736879] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    3.736902] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    3.736926] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    3.737113] hda_intel: Disabling MSI
[    3.737118] ALSA hda_intel.c:3153 0000:01:00.1: Handle VGA-switcheroo audio client
[    3.753205] saa7134_alsa: disagrees about version of symbol snd_ctl_add
[    3.753207] saa7134_alsa: Unknown symbol snd_ctl_add (err -22)
[    3.753210] saa7134_alsa: disagrees about version of symbol snd_pcm_new
[    3.753211] saa7134_alsa: Unknown symbol snd_pcm_new (err -22)
[    3.753224] saa7134_alsa: disagrees about version of symbol snd_pcm_stop
[    3.753225] saa7134_alsa: Unknown symbol snd_pcm_stop (err -22)
[    3.753233] saa7134_alsa: disagrees about version of symbol snd_ctl_new1
[    3.753234] saa7134_alsa: Unknown symbol snd_ctl_new1 (err -22)
[    3.753242] saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl
[    3.753242] saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl (err -22)
[    3.753250] saa7134_alsa: disagrees about version of symbol snd_ctl_notify
[    3.753251] saa7134_alsa: Unknown symbol snd_ctl_notify (err -22)
[    3.753253] saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops
[    3.753254] saa7134_alsa: Unknown symbol snd_pcm_set_ops (err -22)
[    3.753264] saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer
[    3.753265] saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer (err -22)
[    3.753275] saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed
[    3.753276] saa7134_alsa: Unknown symbol snd_pcm_period_elapsed (err -22)
[    3.753278] saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_step
[    3.753279] saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_step (err -22)
[    3.890506] ALSA hda_codec.c:4506 Too many HDMI devices
[    3.890509] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[    3.890511] ALSA hda_codec.c:4506 Too many HDMI devices
[    3.890512] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[    3.908426] hda_codec: cannot build controls for #0 (error -16)
[    3.967491] firewire_core 0000:06:01.0: created device fw0: GUID 0049e550c3414b00, S400
[    4.733146] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    5.814966] device-mapper: table: 253:7: linear: dm-linear: Device lookup failed
[    5.814977] device-mapper: ioctl: error adding target to table
[    5.815213] device-mapper: table: 253:7: linear: dm-linear: Device lookup failed
[    5.815222] device-mapper: ioctl: error adding target to table
[    6.222570] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   18.026576] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   18.029444] systemd-journald[394]: Received request to flush runtime journal from PID 1
[   18.052717] type=1400 audit(1388706883.504:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=824 comm="apparmor_parser"
[   18.059879] type=1400 audit(1388706883.511:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=832 comm="apparmor_parser"
[   18.063867] type=1400 audit(1388706883.515:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=836 comm="apparmor_parser"
[   18.067711] type=1400 audit(1388706883.519:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=840 comm="apparmor_parser"
[   18.073366] type=1400 audit(1388706883.525:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=845 comm="apparmor_parser"
[   18.073591] type=1400 audit(1388706883.525:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=845 comm="apparmor_parser"
[   18.073797] type=1400 audit(1388706883.525:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=845 comm="apparmor_parser"
[   18.073966] type=1400 audit(1388706883.525:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=845 comm="apparmor_parser"
[   18.077756] type=1400 audit(1388706883.529:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/colord" pid=849 comm="apparmor_parser"
[   18.081225] type=1400 audit(1388706883.533:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=853 comm="apparmor_parser"
[   18.156139] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.156141] Bluetooth: BNEP filters: protocol multicast
[   18.156147] Bluetooth: BNEP socket layer initialized
[   18.172328] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   18.176184] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   18.179175] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.193153] vboxdrv: Found 8 processor cores.
[   18.193272] vboxdrv: fAsync=0 offMin=0x196 offMax=0x80f8
[   18.193308] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   18.193309] vboxdrv: Successfully loaded version 4.2.18_OSE (interface 0x001a0005).
[   18.308616] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
[   18.396765] vboxpci: IOMMU not found (not registered)
[   18.921926] NVRM: Your system is not currently configured to drive a VGA console
[   18.921928] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   18.921929] NVRM: requires the use of a text-mode VGA console. Use of other console
[   18.921930] NVRM: drivers including, but not limited to, vesafb, may result in
[   18.921931] NVRM: corruption and stability problems, and is not supported.
[   19.103914] NET: Registered protocol family 17
[   19.259157] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[   19.314052] fuse init (API version 7.22)
[   19.359592] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[   19.359670] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   20.732401] Bluetooth: RFCOMM TTY layer initialized
[   20.732411] Bluetooth: RFCOMM socket layer initialized
[   20.732412] Bluetooth: RFCOMM ver 1.11
[   22.872248] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   22.872280] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   55.643173] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=88 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=48 
[  301.438837] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[  301.462974] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[  301.463009] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[  301.463036] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[  301.463063] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[  301.463089] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[  301.463114] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25
[  301.463142] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[  301.463169] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[  301.463212] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
[  301.463243] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29
[  301.463463] hda_intel: Disabling MSI
[  301.463468] ALSA hda_intel.c:3153 0000:01:00.1: Handle VGA-switcheroo audio client
[  301.617897] ALSA hda_codec.c:4506 Too many HDMI devices
[  301.617901] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[  301.617903] ALSA hda_codec.c:4506 Too many HDMI devices
[  301.617904] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[  301.923958] hda_codec: cannot build controls for #0 (error -16)
[  314.124631] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=316 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=276 
[  314.375193] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=316 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=276 
[  314.625755] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=316 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=276 
[  314.826218] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=389 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=349 
[  314.927164] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=105 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=65 
[  345.959997] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=105 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=65 
[  377.997014] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=105 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=65 
[  442.054771] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=105 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=65 
[  570.156370] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=105 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=65 
[  674.140005] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[  674.164430] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30
[  674.164467] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
[  674.164495] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32
[  674.164521] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33
[  674.164547] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input34
[  674.164576] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input35
[  674.164601] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input36
[  674.165334] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input37
[  674.165396] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input38
[  674.165442] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input39
[  674.166031] hda_intel: Disabling MSI
[  674.166037] ALSA hda_intel.c:3153 0000:01:00.1: Handle VGA-switcheroo audio client
[  674.320041] ALSA hda_codec.c:4506 Too many HDMI devices
[  674.320043] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[  674.320044] ALSA hda_codec.c:4506 Too many HDMI devices
[  674.320045] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[  674.626124] hda_codec: cannot build controls for #0 (error -16)
[  688.222485] LVM: Activation generator successfully completed.
[  826.265004] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=105 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=65 
[ 1338.507486] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=105 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=65 
[ 2362.957283] SFW2-INext-DROP-DEFLT IN=eno1 OUT= MAC= SRC=fe80:0000:0000:0000:922b:34ff:fe31:cac2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=105 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=65
Es como si en la propia instalación no haya reconocido el hardware y sigue sin reconocerlo (decir que con otras distribuciones si funciona y en windows tambien).

Seguro que es alguna tonteria (no lo de subir el volumen porque no me deja seleccionar la tarjeta).

A ver si me ayudais para poder seguir aprendiendo en este sistema.

Gracias.
Responder Citando
  #2  
Antiguo 03-ene-2014, 01:39
Avatar de mikrios
mikrios mikrios está desconectado
Miembro FOROSuSE
 
Fecha de Ingreso: 02-marzo-2013
Ubicación: Lat. 27.994547-Lon -15.405127-160m nivel del mar
Versión: 13.1-2,TW,Leap
Mensajes: 4.530
Agradecimientos: 1.911
Agradecido 1.402 Veces en 1.175 Mensajes
Poder de Credibilidad: 9
mikrios llegará a ser famoso muy pronto
Las configuraciones de sonido suelen aparecer en Yast (en el apartado de hardware ) y en Yast sonido (que es donde se configura el hardware de sonido ) .

Mira si aparece en sonido , si la ves ahí , te vas a donde dice otros y pon definir como tarjeta principal y después aceptar .

Por lo que vi en log , la tiene reconocida como una intel , pero tienes demasiadas cosas que pulir en ese log .

Una de ellas , según recomienda el log es que actualices la bios de la placa base :

3.693910] [drm] Please upgrade your BIOS to fix this

Código:
[  674.140005] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[  674.164430] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30
[  674.164467] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
[  674.164495] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32
[  674.164521] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33
[  674.164547] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input34
[  674.164576] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input35
[  674.164601] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input36
[  674.165334] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input37
[  674.165396] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input38
[  674.165442] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input39
[  674.166031] hda_intel: Disabling MSI
[  674.166037] ALSA hda_intel.c:3153 0000:01:00.1: Handle VGA-switcheroo audio client
[  674.320041] ALSA hda_codec.c:4506 Too many HDMI devices
[  674.320043] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[  674.320044] ALSA hda_codec.c:4506 Too many HDMI devices
[  674.320045] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[  674.626124] hda_codec: cannot build controls for #0 (error -16)
Parece que hay muchas cosas que depurar , en ese log
Intenta actualizar la bios (para corregir algunos de esos errores ,es una z77 y tengo una en versión Asus , y no aparecen tantos problemas como en este log.
Segundo vete a Yast sonido y donde esta la de Intel (que aparecera en verde y debajo aparece la de hdmi de nvidia ) .
Sobre la de Intel , te vas a otros y le dices lo que te puse al principio definir como tarjeta principal .( aunque sea una realtek , no implica que este incluida en una placa base de intel , asus , etc . si los drivers que hay de sonido son Intel , son los que tiene que usar ) .

Una vez hecho esto , te vas a preferencias del sistema y en el apartado multimedia , buscas la de alc 898 y le das preferir a la que aparezca en analog (analógico ) , para que esta este en primer lugar .
Después puedes ir a Kmixer y si quieres defines el canal maestro .

Saludos cordiales

PD.
También puedes mejorar un poquito , el actualizar el kernel de la 13.1 desde sus repositorios , en el foro se ha puesto en algún tema los enlaces .

Este es para la 13.1

http://download.opensuse.org/reposit...13.1/standard/

Que va por esta versión :
Código PHP:
X79PRO:~ # inxi -MSCAz
System:    HostX79PRO Kernel3.11.10-7.g016ba65-desktop x86_64 (64 bitDesktopN/A DistroopenSUSE 13.1 (Bottle)
Machine:   MoboASUSTeK modelP9X79 PRO versionRev 1.xx BiosAmerican Megatrends version4502 date10/15/2013
CPU
:       Hexa core Intel Core i7-4930K CPU (-HT-MCP-) cache12288 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
           
Clock Speeds11200.00 MHz 21200.00 MHz 31200.00 MHz 41200.00 MHz 51200.00 MHz 61200.00 MHz 72300.00 MHz 81200.00 MHz 91800.00 MHz 101200.00 MHz 111200.00 MHz 123401.00 MHz
Audio
:     Card-1NVIDIA GK107 HDMI Audio Controller driversnd_hda_intel SoundALSA verk3.11.10-7.g016ba65-desktop
           Card
-2Intel C600/X79 series High Definition Audio Controller driversnd_hda_intel 
Kernel: 3.11.10-7.g016ba65-desktop x86_64 (64 bit) Desktop
ALSA ver: k3.11.10-7.g016ba65-desktop
Edito:
El problema de si actualizas el kernel , es que tienes que instalar los drivers de nvidia de nuevo (excepto que no los tengas instalados , entonces no tendrás problemas , ya una vez actualizado el kernel , no hay problemas para instalar los drivers nvidia , incluido instalarlos desde repositorios de openSUSE de nvidia ) .
Saludos
Edito:
Esa no es por hdmi y es la que tienes en tu log : 674.164601] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input36
Lo que me preocupa un poco es : [ 674.626124] hda_codec: cannot build controls for #0 (error -16) .
La de Front es la salida de audio estereo de tu placa base (o la frontal de los efectos ) y es analógica , por lo que es la que debe llevar el sonido de audio , a los altavoces o a la entrada de audio de un Tv /monitor o un monitor multimedia con sonido incorporado .
Si usas el cable hdmi creo que suele detectarlo de forma automática y cambia el vídeo y el audio a esa salida .
Saludos

Última edición por mikrios; 03-ene-2014 a las 02:01 Razón: añadir
Responder Citando
  #3  
Antiguo 03-ene-2014, 13:03
Avatar de DiabloRojo
DiabloRojo DiabloRojo está desconectado
Super Moderador
 
Fecha de Ingreso: 19-marzo-2005
Ubicación: En un lugar del planeta Tierra
Versión: La ultima estable
Mensajes: 16.478
Agradecimientos: 563
Agradecido 2.416 Veces en 1.627 Mensajes
Poder de Credibilidad: 10
DiabloRojo llegará a ser famoso muy pronto
Porque leches, abres 5 temas con el mismo titulo. Lee las normas del foro.
__________________
NORMAS A CUMPLIR EN LOS FOROS (Lectura obligatoria) Lo siento, no contesto privados sobre problemas con GNU/Linux.
Síguenos en TWITTER y en FACEBOOK
Código:
Buscador de   Alojamiento      Alojamiento     Otros
 paquetes:    de imágenes:     de ficheros:    buscadores:
Search        TinyPic          Ifile Wuala     Simple y Facil
Webpinstant   Paste Suse       SendSpace       TextSnip  Cl1p
Responder Citando
  #4  
Antiguo 03-ene-2014, 14:30
djdevil666bcn djdevil666bcn está desconectado
Aforado
 
Fecha de Ingreso: 31-diciembre-2013
Versión: 13.1
Mensajes: 24
Agradecimientos: 2
Agradecido 2 Veces en 2 Mensajes
Poder de Credibilidad: 0
djdevil666bcn está en el buen camino
Perdón por repetir el hilo.

Firefox me daba error y pensaba que no lo publicaba por eso lo reintente varias veces.

Que sea nuevo en opensuse no significa que me haya caído de un pino.
Así que antes de denunciar infracción preguntar que es lo que ha pasado, porque ha sido ajeno a mi voluntad.

Enviado desde mi GT-I9505 mediante Tapatalk
Responder Citando
  #5  
Antiguo 03-ene-2014, 16:02
Avatar de mikrios
mikrios mikrios está desconectado
Miembro FOROSuSE
 
Fecha de Ingreso: 02-marzo-2013
Ubicación: Lat. 27.994547-Lon -15.405127-160m nivel del mar
Versión: 13.1-2,TW,Leap
Mensajes: 4.530
Agradecimientos: 1.911
Agradecido 1.402 Veces en 1.175 Mensajes
Poder de Credibilidad: 9
mikrios llegará a ser famoso muy pronto
Él no denuncio ninguna infracción si no que te ha preguntado .

Es normal que a veces pase eso , o que salga la misma respuesta repetida dos veces , para eso vas a avanzado y eliminas la que es incorrecta , en el caso de que no puedas borrarlo , pues solicitas ayuda algún moderador .

Pero la mayoría de las veces cuando notes algo raro o que no refresca bien el explorador , intenta guardar el tema en un fichero de texto , para no perder los datos , le das a refrescar el navegador y mira en las zona del foro que no aparezca repetido , si ves que el tema no esta , pues lo añades nuevo , pero si ves que esta , lo dejas tal cual , en caso de que lo veas repetido , lo comentas en tu último tema , por si no puedes borrarlo ,para que lo haga un moderador .

Para ello editas el tema , para no abrir otro hilo y en el añades ese comentario .

Y por lo del sonido recuerda activarlo o seleccionarlo desde Yast ( es prioritario y prevalece sobre kde ) , una vez hecho , lo demás ajustes puedes hacerlos desde kde en preferencias del sistema y en utilidades de audio , como por ejemplo kmixer (mezclador ) .

También desde Yast , en el mismo sitio indicado puedes desactivar el servidor de pulse audio , lo que cambia la configuración en el mezclador de kde y te muestra uno con el control de todas las salidas y entradas que tiene tu tarjeta o controladora de sonido .

Saludos

Última edición por mikrios; 03-ene-2014 a las 16:04 Razón: corregir
Responder Citando
  #6  
Antiguo 11-ene-2014, 12:15
djdevil666bcn djdevil666bcn está desconectado
Aforado
 
Fecha de Ingreso: 31-diciembre-2013
Versión: 13.1
Mensajes: 24
Agradecimientos: 2
Agradecido 2 Veces en 2 Mensajes
Poder de Credibilidad: 0
djdevil666bcn está en el buen camino
Bueno, probando y probando resulta que no es necesario instalar ningún driver adicional para el audio en esta placa.

El audio funciona bien pero hay que conectar el cable (Jack) a cualquiera de las salidas de regar, surround o lfe; en front no funciona.

El problema es que el mezclador en cada reinicio vuelve a asignar el audio al canal auriculares y el audio sale por línea out. De esto no se si se encarga pulse pulseaudio o alsa.

¿sabéis que archivo de configuración hay que modificar para que en cada reinicio se quede predefinido line out en vez de auriculares?

¿y alguien sabe si se puede sacar el audio por el conector front(verde trasero) en vez de por los otros(naranja, negro, gris)?

Supongo que seria cuestion de cambiar el parametro predefinido de input12 por el de input16 (este es el que tiene que ser) como muestra el log:

Código:
[    4.174141] saa7134 ALSA driver for DMA sound loaded
[    4.189491] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.189530] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.189561] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    4.189588] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    4.189615] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    4.189642] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    4.189671] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    4.189698] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    4.189725] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    4.189750] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    4.367892] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[    4.367930] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[    4.367957] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
[    4.367984] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23



[    4.174141] saa7134 ALSA driver for DMA sound loaded
[    4.178037] ALSA hda_auto_parser.c:393 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    4.178039] ALSA hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.178040] ALSA hda_auto_parser.c:401    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.178041] ALSA hda_auto_parser.c:402    mono: mono_out=0x0
[    4.178041] ALSA hda_auto_parser.c:405    dig-out=0x11/0x1e
[    4.178042] ALSA hda_auto_parser.c:406    inputs:
[    4.178043] ALSA hda_auto_parser.c:410      Front Mic=0x19
[    4.178044] ALSA hda_auto_parser.c:410      Rear Mic=0x18
[    4.178045] ALSA hda_auto_parser.c:410      Line=0x1a
[    4.181058] ALSA hda_auto_parser.c:393 autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[    4.181059] ALSA hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.181060] ALSA hda_auto_parser.c:401    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.181061] ALSA hda_auto_parser.c:402    mono: mono_out=0x0
[    4.181062] ALSA hda_auto_parser.c:405    dig-out=0x6/0x7
[    4.181062] ALSA hda_auto_parser.c:406    inputs:
[    4.189956] ALSA hda_intel.c:3116 0000:01:00.1: Handle VGA-switcheroo audio client
[    4.189976] ALSA hda_intel.c:3593 0000:01:00.1: Disabling 64bit DMA
[    4.193003] ALSA hda_intel.c:1748 0000:01:00.1: Enable delay in RIRB handling


Salida de aadebug:

Código:
ALSA Audio Debug v0.2.0 - dom ene 12 00:37:17 CET 2014
http://alsa.opensrc.org/aadebug
http://www.gnu.org/licenses/agpl-3.0.txt

Kernel ----------------------------------------------------
Linux linux-eyaa 3.11.6-4-desktop #1 SMP PREEMPT Wed Oct 30 18:04:56 UTC 2013 (e6d4a27) x86_64 x86_64 x86_64 GNU/Linux
Advanced Linux Sound Architecture Driver Version k3.11.6-4-desktop.

Loaded Modules --------------------------------------------
snd_hda_codec_hdmi     45213  1 
snd_hda_intel          48171  5 
snd_hda_codec         205080  2 snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               110211  4 snd_hda_codec_hdmi,saa7134_alsa,snd_hda_intel,snd_hda_codec
snd_seq                69752  0 
snd_timer              29423  2 snd_pcm,snd_seq
snd_seq_device         14497  1 snd_seq
snd                    87417  21 snd_hda_codec_hdmi,saa7134_alsa,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
snd_page_alloc         18710  2 snd_hda_intel,snd_pcm

Proc Asound -----------------------------------------------
 0 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0xf7d30000 irq 47
 1 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xf7080000 irq 17
 2 [SAA7134        ]: SAA7134 - SAA7134
                      saa7133[0] at 0xf7a01000 irq 17
  1:        : sequencer
  2: [ 2- 0]: digital audio capture
  3: [ 2]   : control
  4: [ 0- 3]: digital audio playback
  5: [ 0- 2]: digital audio capture
  6: [ 0- 1]: digital audio playback
  7: [ 0- 0]: digital audio playback
  8: [ 0- 0]: digital audio capture
  9: [ 0- 3]: hardware dependent
 10: [ 0- 2]: hardware dependent
 11: [ 0]   : control
 12: [ 1- 9]: digital audio playback
 13: [ 1- 8]: digital audio playback
 14: [ 1- 7]: digital audio playback
 15: [ 1- 3]: digital audio playback
 16: [ 1- 0]: hardware dependent
 17: [ 1]   : control
 33:        : timer
00-03: HDA Codec 3
00-02: HDA Codec 2
01-00: HDA Codec 0
00-00: ID 899 Analog : ID 899 Analog : playback 1 : capture 1
00-01: ID 899 Digital : ID 899 Digital : playback 1
00-02: ID 899 Alt Analog : ID 899 Alt Analog : capture 2
00-03: ID 2806 Digital : ID 2806 Digital : playback 1
01-03: HDMI 0 : HDMI 0 : playback 1
01-07: HDMI 1 : HDMI 1 : playback 1
01-08: HDMI 2 : HDMI 2 : playback 1
01-09: HDMI 3 : HDMI 3 : playback 1
02-00: SAA7134 PCM : SAA7134 PCM : capture 1
Client info
  cur  clients : 1
  peak clients : 1
  max  clients : 192

Client   0 : "System" [Kernel]
  Port   0 : "Timer" (Rwe-)
  Port   1 : "Announce" (R-e-)
Client  14 : "Midi Through" [Kernel]
  Port   0 : "Midi Through Port-0" (RWe-)

Dev Snd ---------------------------------------------------
total 0
drwxr-xr-x  2 root root      100 ene 11 13:18 by-path
crw-rw----+ 1 root audio 116, 11 ene 11 13:18 controlC0
crw-rw----+ 1 root audio 116, 17 ene 11 13:18 controlC1
crw-rw----+ 1 root audio 116,  3 ene 11 13:18 controlC2
crw-rw----+ 1 root audio 116, 10 ene 11 13:18 hwC0D2
crw-rw----+ 1 root audio 116,  9 ene 11 13:18 hwC0D3
crw-rw----+ 1 root audio 116, 16 ene 11 13:18 hwC1D0
crw-rw----+ 1 root audio 116,  8 ene 11 22:38 pcmC0D0c
crw-rw----+ 1 root audio 116,  7 ene 12 00:28 pcmC0D0p
crw-rw----+ 1 root audio 116,  6 ene 11 13:18 pcmC0D1p
crw-rw----+ 1 root audio 116,  5 ene 11 13:18 pcmC0D2c
crw-rw----+ 1 root audio 116,  4 ene 11 13:18 pcmC0D3p
crw-rw----+ 1 root audio 116, 15 ene 11 13:18 pcmC1D3p
crw-rw----+ 1 root audio 116, 14 ene 11 13:18 pcmC1D7p
crw-rw----+ 1 root audio 116, 13 ene 11 13:18 pcmC1D8p
crw-rw----+ 1 root audio 116, 12 ene 11 13:18 pcmC1D9p
crw-rw----+ 1 root audio 116,  2 ene 11 13:18 pcmC2D0c
crw-rw----+ 1 root audio 116,  1 ene 11 13:18 seq
crw-rw----+ 1 root audio 116, 33 ene 11 13:18 timer

CPU -------------------------------------------------------
model name      : Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
cpu MHz         : 2856.000
model name      : Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
cpu MHz         : 3332.000
model name      : Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
cpu MHz         : 2822.000
model name      : Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
cpu MHz         : 2720.000
model name      : Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
cpu MHz         : 2720.000
model name      : Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
cpu MHz         : 3910.000
model name      : Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
cpu MHz         : 3638.000
model name      : Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
cpu MHz         : 3808.000

RAM -------------------------------------------------------
MemTotal:       15375780 kB
SwapTotal:      20971516 kB

Hardware --------------------------------------------------
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 660 Ti] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)
06:00.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)

Interupts -------------------------------------------------
           CPU0       CPU1       CPU2       CPU3       CPU4       CPU5       CPU6       CPU7       
  0:         24          0          0          0          0          0          0          0   IO-APIC-edge      timer
  1:          2          0          0          0          0          0          0          0   IO-APIC-edge      i8042
  8:          1          0          0          0          0          0          0          0   IO-APIC-edge      rtc0
  9:          0          0          0          0          0          0          0          0   IO-APIC-fasteoi   acpi
 12:          4          0          0          0          0          0          0          0   IO-APIC-edge      i8042
 16:     465130          0          0          0          0          0          0          0   IO-APIC-fasteoi   ehci_hcd:usb1
 17:        519          0          0          0          0          0          0          0   IO-APIC-fasteoi   saa7133[0], saa7133[0], snd_hda_intel
 18:          2          0          0          0          0          0          0          0   IO-APIC-fasteoi   firewire_ohci
 19:          0          0          0          0          0          0          0          0   IO-APIC-fasteoi   ath9k
 23:        354          0          0          0          0          0          0          0   IO-APIC-fasteoi   ehci_hcd:usb2
 41:         15          0          0          0          0          0          0          0   PCI-MSI-edge      mei_me
 42:     127117          0          0          0          0          0          0          0   PCI-MSI-edge      ahci
 43:      53945          0          0          0          0          0          0          0   PCI-MSI-edge      ahci
 44:      42429          0          0          0          0          0          0          0   PCI-MSI-edge      xhci_hcd
 45:     118299          0          0          0          0          0          0          0   PCI-MSI-edge      eno1
 46:         38          0          0          0          0          0          0          0   PCI-MSI-edge      i915
 47:       2695          0          0          0          0          0          0          0   PCI-MSI-edge      snd_hda_intel
 48:     624009          0          0          0          0          0          0          0   PCI-MSI-edge      nvidia
 49:          0          0          0          0          0          0          0          0   PCI-MSI-edge      enp7s0
NMI:        103         76         70         72         25         35         73         27   Non-maskable interrupts
LOC:    2184926    1379297    1443418    1351189     387544     617515     613414     416009   Local timer interrupts
SPU:          0          0          0          0          0          0          0          0   Spurious interrupts
PMI:        103         76         70         72         25         35         73         27   Performance monitoring interrupts
IWI:      30740      45223      39076      39859      10398      10109      16777      16053   IRQ work interrupts
RTR:          7          0          0          0          0          0          0          0   APIC ICR read retries
RES:    4238247    2121069    2385158    2229011    1421250    1367466    1159088    1280858   Rescheduling interrupts
CAL:       1383       1617       1673       1604       1543       1569       1605       1607   Function call interrupts
TLB:      15676      19660       8350      13321      14250       9398       7524      22581   TLB shootdowns
TRM:          0          0          0          0          0          0          0          0   Thermal event interrupts
THR:          0          0          0          0          0          0          0          0   Threshold APIC interrupts
MCE:          0          0          0          0          0          0          0          0   Machine check exceptions
MCP:        137        137        137        137        137        137        137        137   Machine check polls
ERR:          0
MIS:          0

Saludos y gracias.

Pd. Si no me explico bien decirme lo e intento poner un video.

Enviado desde mi GT-I9505G mediante Tapatalk

Última edición por djdevil666bcn; 12-ene-2014 a las 00:46 Razón: ampliar informacion
Responder Citando
  #7  
Antiguo 24-ene-2014, 10:27
Avatar de mikrios
mikrios mikrios está desconectado
Miembro FOROSuSE
 
Fecha de Ingreso: 02-marzo-2013
Ubicación: Lat. 27.994547-Lon -15.405127-160m nivel del mar
Versión: 13.1-2,TW,Leap
Mensajes: 4.530
Agradecimientos: 1.911
Agradecido 1.402 Veces en 1.175 Mensajes
Poder de Credibilidad: 9
mikrios llegará a ser famoso muy pronto
Como había comentado , tengo el pulse audio desactivado desde Yast , sonido ; por lo cual la apariencia del mezclador cambia con respeto a la original .

En ese caso se tiene control de todas las salidas desde el propio mezclador y en sus ajustes se selecciona el canal maestro , que en este caso seria el master del mezclador .
Las salida en estereo se efectúa por el front (o frontal , correspondiente al estereo de un 5.1 o de un 7.1 ) .

Saludos
Imágenes Adjuntas
Tipo de Archivo: jpg instantánea12.jpg (18,9 KB (Kilobytes), 30 visitas)

Última edición por mikrios; 24-ene-2014 a las 10:28 Razón: corregir
Responder Citando
  #8  
Antiguo 24-ene-2014, 15:57
djdevil666bcn djdevil666bcn está desconectado
Aforado
 
Fecha de Ingreso: 31-diciembre-2013
Versión: 13.1
Mensajes: 24
Agradecimientos: 2
Agradecido 2 Veces en 2 Mensajes
Poder de Credibilidad: 0
djdevil666bcn está en el buen camino
Cita:
Iniciado por mikrios Ver Mensaje
Como había comentado , tengo el pulse audio desactivado desde Yast , sonido ; por lo cual la apariencia del mezclador cambia con respeto a la original .

En ese caso se tiene control de todas las salidas desde el propio mezclador y en sus ajustes se selecciona el canal maestro , que en este caso seria el master del mezclador .
Las salida en estereo se efectúa por el front (o frontal , correspondiente al estereo de un 5.1 o de un 7.1 ) .

Saludos
Correcto ese aspecto es el que tiene ahora mi kmixer, pero en mi caso el canal frontal (conector verde de la placa) no funciona (en windows, sí).

Pues mi duda es esa, ¿como le digo a openSUSE que saque el audio por el canal frontal en vez de por el resto?

Gracias.
Responder Citando
  #9  
Antiguo 25-ene-2014, 04:41
Avatar de mikrios
mikrios mikrios está desconectado
Miembro FOROSuSE
 
Fecha de Ingreso: 02-marzo-2013
Ubicación: Lat. 27.994547-Lon -15.405127-160m nivel del mar
Versión: 13.1-2,TW,Leap
Mensajes: 4.530
Agradecimientos: 1.911
Agradecido 1.402 Veces en 1.175 Mensajes
Poder de Credibilidad: 9
mikrios llegará a ser famoso muy pronto
Cambia el canal maestro a front haber que pasa , y otra cosa es que tengas elegido en phonon el correcto , si desde kmixer vas a ajustes de sonido te manda a phonon , o si no desde preferencias del sistema ..multimedia ...sonido ,, debería estar en primer lugar hda intel pch (alc898 analog) , en caso que no sea así que tengas otro o uno por defecto , pues te sitúas sobre el hda intel pch (alc898 analog) y le das a preferir hasta que se ponga en primer lugar .

Saludos
Responder Citando
  #10  
Antiguo 16-feb-2016, 23:42
djdevil666bcn djdevil666bcn está desconectado
Aforado
 
Fecha de Ingreso: 31-diciembre-2013
Versión: 13.1
Mensajes: 24
Agradecimientos: 2
Agradecido 2 Veces en 2 Mensajes
Poder de Credibilidad: 0
djdevil666bcn está en el buen camino
Hola,
Me rendí durante unos años y ahora he vuelto a la carga pensando que con versiones nuevas se habría corregido el bug y no ha sido así.

Estoy en las mismas. No hay manera de sacar el audio por el canal correcto. Alguna solución más desde que lo dejé en el 2014?

Muchas gracias.
Responder Citando
Respuesta

Marcadores


(0 miembros y 1 visitantes)
 
Herramientas
Desplegado

Normas de Publicación
No puedes crear nuevos temas
No puedes responder mensajes
No puedes subir archivos adjuntos
No puedes editar tus mensajes

Los Códigos BB están Activado
Las Caritas están Activado
[IMG] está Activado
El Código HTML está Desactivado

Ir al Foro

Temas Similares
Tema Autor Foro Respuestas Último mensaje
Traducción Tutorial Sonido en openSuse 11.0 tranzorx Hardware 7 02-mar-2012 05:59
Traducción de SDB:AudioTroubleshooting de openSUSE tranzorx Hardware 6 09-mar-2011 20:10
Problema con mi placa de Sonido en OpenSuse 11.2 Prideone Hardware 10 21-ene-2010 10:18
Sonido se me desconfigura. Tarjeta integrada Azalia. tranzorx General OpenSUSE 12 25-sep-2008 19:27



Síguenos en Twitter Suscríbete a nuestras noticias Acompáñanos en Facebook


La franja horaria es GMT +2. Ahora son las 01:30.
Powered by vBulletin™
Copyright © vBulletin Solutions, Inc. All rights reserved.

Esta página está bajo una licencia de Creative Commons, salvo que no se indique lo contrario.
Creative Commons License

Valid CSS!

Diseño por:Designed by: vbdesigns.devbdesigns.de 
Contáctenos - ForoSUSE - Archivo - Declaración de Privacidad - Arriba