Registrarse
Home
Foros
Miembros
Calendario
Normas
Ayuda

Foros de usuarios de openSUSE
Retroceder   ForoSUSE > Zona OpenSUSE > Hardware


Síguenos en Twitter Suscríbete a nuestras noticias Acompáñanos en Facebook

Respuesta
 
Herramientas Desplegado

Problema con mi placa de Sonido en OpenSuse 11.2
  #1  
Antiguo 16-nov-2009, 05:24
Avatar de Prideone
Prideone Prideone está desconectado
Aforado
 
Fecha de Ingreso: 06-agosto-2008
Ubicación: Buenos Aires, Argentina
Versión: 12.3
Mensajes: 66
Agradecimientos: 14
Agradecido 3 Veces en 3 Mensajes
Poder de Credibilidad: 10
Prideone está en el buen camino
Problema con mi placa de Sonido en OpenSuse 11.2

Buenas a todos!! Instalé la nueva versión de OpenSuse 11.2 y me topé con la sorpresa de que, aunque sí me reconoce la placa de sonido, no escucho ningún sonido.
Es raro, porque tengo mi OpenSuse 11.1 instalado y si tengo sonido, y me reconoce la misma placa de sonido.

Vi un tutorial ( http://www.forosuse.org/forosuse/showthread.php?t=18535 ) para poder instalar los driver y placas de sonido pero me he quedado en la mitad.
Voy a poner todo mi progreso: (disculpas si es muy largo)

Voy al Yast2 -> Hardware -> Información sobre el harware -> Sonido

Y me indica que tengo la marca MCP55 High Definition Audio.

Ahora, me voy a configurar la placa de sonido. Elimino la que tengo y agrego la del modelo y me sale lo siguiente:



Termino de aditar lo de la placa de sonido y queda así:




Sigo con el tutorial con los siguientes comandos:

prideone@linux-u307:~> rpm -q alsa-utils alsa-firmware
alsa-utils-1.0.21-3.1.x86_64
alsa-firmware-1.0.20-3.2.noarch

prideone@linux-u307:~> speaker-test -Dplug:front -c2 -l5 -twav

speaker-test 1.0.21

Playback device is plug:front
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 262144
Period size range from 32 to 131072
Using max buffer size 262144
Periods = 4
was set period_size = 65536
was set buffer_size = 262144
0 - Front Left
1 - Front Right
Time per period = 5,476603
0 - Front Left
1 - Front Right
Time per period = 5,475967
0 - Front Left
1 - Front Right
Time per period = 5,475948
0 - Front Left
1 - Front Right
Time per period = 5,475966
0 - Front Left
1 - Front Right

linux-u307:/home/prideone # alsaconfig
If 'alsaconfig' is not a typo you can use command-not-found to lookup the package that contains it, like this:
cnf alsaconfig
linux-u307:/home/prideone # cnf alsaconfig
alsaconfig: orden no encontrada

linux-u307:/home/prideone # cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.20.

linux-u307:/home/prideone # cat /proc/asound/modules
0 snd_hda_intel

linux-u307:/etc/modprobe.d # mcedit /etc/modprobe.d/50-sound.conf
options snd-hda-intel enable=1 index=0 model=toshiba
# 9LTX.+y3wwbwvfe4:MCP55 High Definition Audio
alias snd-card-0 snd-hda-intel

[[[cuando agrego el modelo en el archivo "50-sound.conf" MCD55 High Defitions Audio me sale lo siguiente:
linux-u307:/etc/modprobe.d # rcalsasound restart
Shutting down sound driver done
Starting sound driver: hda-intelFATAL: Error inserting snd_hda_intel (/lib/modules/2.6.31.5-0.1-desktop/kernel/sound/pci/hda/snd-hda-intel.ko): Unknown symbol in module, or unknown parameter (see dmesg)
failed]]]

Y aquí me he quedado. Alguien sabe que podría llegar a hacer? ^^

Saludos!!

PD: en ningún momento, eh escuchado sonido alguno en cualquier etapa de mi pobre proceso. T_T
__________________
Responder Citando
  #2  
Antiguo 16-nov-2009, 08:34
Avatar de davmont
davmont davmont está desconectado
Moderador
 
Fecha de Ingreso: 13-diciembre-2007
Ubicación: ~/
Versión: 12.3 x86_64
Mensajes: 2.871
Agradecimientos: 78
Agradecido 141 Veces en 125 Mensajes
Poder de Credibilidad: 13
davmont está en el buen camino
y has mirado el dmesg, como te dice, para saber por qué no pone el módulo?

es raro, la verdad... a mi me va todo a la primera :S

un saludo
__________________
No atiendo consultas sobre Linux/openSUSE por privado, usad el foro que para algo está
Normas del foro, de lectura obligada


Responder Citando
  #3  
Antiguo 17-nov-2009, 14:28
Avatar de Xoslorg
Xoslorg Xoslorg está desconectado
Aforado
 
Fecha de Ingreso: 29-mayo-2006
Mensajes: 13
Agradecimientos: 0
Agradecido 0 Veces en 0 Mensajes
Poder de Credibilidad: 0
Xoslorg está en el buen camino
Y tu modelo y marca de portatil?.
Yo he tenido un problema parecido con la imsma tarjeta y lo solucione añadiendo:

options snd-hda-intel model=hp-m4 enable_msi=1

en sound.conf y reiniciando.

Pero dependes tambien del fabricante del ordenador ademas del chipset.
En mi caso era el modelo hp-m4.
Responder Citando
  #4  
Antiguo 17-nov-2009, 17:00
Avatar de Prideone
Prideone Prideone está desconectado
Aforado
 
Fecha de Ingreso: 06-agosto-2008
Ubicación: Buenos Aires, Argentina
Versión: 12.3
Mensajes: 66
Agradecimientos: 14
Agradecido 3 Veces en 3 Mensajes
Poder de Credibilidad: 10
Prideone está en el buen camino
Buenas!!

@davmon: acá está lo que me tiró el dmesg. Por lo poco que se, no veo en donde está lo del audio (ya que puse un buscador, y no encuentra la palabra audio, sound o MCP en todo el trazado).

Código:
prideone@linux-u307:~> dmesg
[    0.000000] Linux version 2.6.31.5-0.1-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2009-10-26 15:49:03 +0100                           
[    0.000000] Command line: root=/dev/disk/by-id/ata-SAMSUNG_HD321KJ_S0MQJ1FQ201621-part1 resume=/dev/disk/by-id/ata-SAMSUNG_HD321KJ_S0MQJ1FQ201621-part5 splash=silent quiet vga=0x31a                  
[    0.000000] KERNEL supported cpus:                                                                
[    0.000000]   Intel GenuineIntel                                                                  
[    0.000000]   AMD AuthenticAMD                                                                    
[    0.000000]   Centaur CentaurHauls                                                                
[    0.000000] BIOS-provided physical RAM map:                                                       
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)                              
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)                            
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)                            
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)                              
[    0.000000]  BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)                           
[    0.000000]  BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)                            
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)                            
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)                            
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)                            
[    0.000000] DMI present.                                                                          
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.                       
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)        
[    0.000000] last_pfn = 0x7ffd0 max_arch_pfn = 0x400000000                                         
[    0.000000] MTRR default type: uncachable                                                         
[    0.000000] MTRR fixed ranges enabled:                                                            
[    0.000000]   00000-9FFFF write-back                                                              
[    0.000000]   A0000-EFFFF uncachable                                                              
[    0.000000]   F0000-FFFFF write-protect                                                           
[    0.000000] MTRR variable ranges enabled:                                                         
[    0.000000]   0 base 0000000000 mask FF80000000 write-back                                        
[    0.000000]   1 disabled                                                                          
[    0.000000]   2 disabled                                                                          
[    0.000000]   3 disabled                                                                          
[    0.000000]   4 disabled                                                                          
[    0.000000]   5 disabled                                                                          
[    0.000000]   6 disabled                                                                          
[    0.000000]   7 disabled                                                                          
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106                      
[    0.000000] Scanning 0 areas for low memory corruption                                            
[    0.000000] modified physical RAM map:                                                            
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)                             
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)                               
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)                             
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)                             
[    0.000000]  modified: 0000000000100000 - 000000007ffd0000 (usable)                               
[    0.000000]  modified: 000000007ffd0000 - 000000007ffde000 (ACPI data)                            
[    0.000000]  modified: 000000007ffde000 - 0000000080000000 (ACPI NVS)                             
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)                             
[    0.000000]  modified: 00000000fee00000 - 00000000fef00000 (reserved)                             
[    0.000000]  modified: 00000000ff780000 - 0000000100000000 (reserved)                             
[    0.000000] initial memory mapped : 0 - 20000000                                                  
[    0.000000] init_memory_mapping: 0000000000000000-000000007ffd0000                                
[    0.000000]  0000000000 - 007fe00000 page 2M                                                      
[    0.000000]  007fe00000 - 007ffd0000 page 4k                                                      
[    0.000000] kernel direct mapping tables up to 7ffd0000 @ 10000-14000                             
[    0.000000] RAMDISK: 379fa000 - 37fefb71                                                          
[    0.000000] ACPI: RSDP 00000000000fa950 00014 (v00 ACPIAM)                                        
[    0.000000] ACPI: RSDT 000000007ffd0000 00034 (v01 A M I  OEMRSDT  06000602 MSFT 00000097)        
[    0.000000] ACPI: FACP 000000007ffd0200 00084 (v02 A M I  OEMFACP  06000602 MSFT 00000097)        
[    0.000000] ACPI: DSDT 000000007ffd0440 064B1 (v01  1ADGH 1ADGH000 00000000 INTL 02002026)        
[    0.000000] ACPI: FACS 000000007ffde000 00040                                                     
[    0.000000] ACPI: APIC 000000007ffd0390 00070 (v01 A M I  OEMAPIC  06000602 MSFT 00000097)        
[    0.000000] ACPI: MCFG 000000007ffd0400 0003C (v01 A M I  OEMMCFG  06000602 MSFT 00000097)        
[    0.000000] ACPI: OEMB 000000007ffde040 0005B (v01 A M I  AMI_OEM  06000602 MSFT 00000097)        
[    0.000000] ACPI: Local APIC address 0xfee00000                                                   
[    0.000000] Scanning NUMA topology in Northbridge 24                                              
[    0.000000] No NUMA configuration found                                                           
[    0.000000] Faking a node at 0000000000000000-000000007ffd0000                                    
[    0.000000] Bootmem setup node 0 0000000000000000-000000007ffd0000                                
[    0.000000]   NODE_DATA [0000000000012000 - 0000000000029fff]                                     
[    0.000000]   bootmap [000000000002a000 -  0000000000039fff] pages 10                             
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 007ffd0000]                          
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]         
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]         
[    0.000000]   #2 [0001000000 - 0001c4bf70]    TEXT DATA BSS ==> [0001000000 - 0001c4bf70]         
[    0.000000]   #3 [00379fa000 - 0037fefb71]          RAMDISK ==> [00379fa000 - 0037fefb71]         
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]         
[    0.000000]   #5 [0001c4c000 - 0001c4c1a8]              BRK ==> [0001c4c000 - 0001c4c1a8]         
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]         
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780                                        
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002200000-ffff880003dfffff] on node 0                                                                                                  
[    0.000000] Zone PFN ranges:                                                                      
[    0.000000]   DMA      0x00000010 -> 0x00001000                                                   
[    0.000000]   DMA32    0x00001000 -> 0x00100000                                                   
[    0.000000]   Normal   0x00100000 -> 0x00100000                                                   
[    0.000000] Movable zone start PFN for each node                                                  
[    0.000000] early_node_map[2] active PFN ranges                                                   
[    0.000000]     0: 0x00000010 -> 0x0000009f                                                       
[    0.000000]     0: 0x00000100 -> 0x0007ffd0                                                       
[    0.000000] On node 0 totalpages: 524127                                                          
[    0.000000]   DMA zone: 56 pages used for memmap                                                  
[    0.000000]   DMA zone: 101 pages reserved                                                        
[    0.000000]   DMA zone: 3826 pages, LIFO batch:0                                                  
[    0.000000]   DMA32 zone: 7112 pages used for memmap                                              
[    0.000000]   DMA32 zone: 513032 pages, LIFO batch:31                                             
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.                                  
[    0.000000] If you got timer trouble try acpi_use_timer_override                                  
[    0.000000] Detected use of extended apic ids on hypertransport bus                               
[    0.000000] ACPI: PM-Timer IO Port: 0x2008                                                        
[    0.000000] ACPI: Local APIC address 0xfee00000                                                   
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)                                    
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)                                    
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])                               
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23                        
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)                              
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.                                                
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)                           
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)                          
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)                          
[    0.000000] ACPI: IRQ9 used by override.                                                          
[    0.000000] ACPI: IRQ14 used by override.                                                         
[    0.000000] ACPI: IRQ15 used by override.                                                         
[    0.000000] Using ACPI (MADT) for SMP configuration information                                   
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs                                                  
[    0.000000] nr_irqs_gsi: 24                                                                       
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000                     
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000                     
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000                     
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)                
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1                            
[    0.000000] PERCPU: Embedded 28 pages at ffff880001c80000, static data 82784 bytes                
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516858           
[    0.000000] Policy zone: DMA32                                                                    
[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HD321KJ_S0MQJ1FQ201621-part1 resume=/dev/disk/by-id/ata-SAMSUNG_HD321KJ_S0MQJ1FQ201621-part5 splash=silent quiet vga=0x31a           
[    0.000000] bootsplash: silent mode.                                                              
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)                                 
[    0.000000] Initializing CPU#0                                                                    
[    0.000000] Checking aperture...                                                                  
[    0.000000] No AGP bridge found                                                                   
[    0.000000] Node 0: aperture @ c8000000 size 32 MB                                                
[    0.000000] Aperture too small (32 MB) than (64 MB)                                               
[    0.000000] Memory: 2048540k/2096960k available (5497k kernel code, 452k absent, 47968k reserved, 4473k data, 980k init)                                                                               
[    0.000000] Hierarchical RCU implementation.                                                      
[    0.000000] NR_IRQS:4352 nr_irqs:424                                                              
[    0.000000] Fast TSC calibration using PIT                                                        
[    0.000000] Detected 2010.163 MHz processor.                                                      
[    0.000012] spurious 8259A interrupt: IRQ7.                                                       
[    0.000108] Console: colour dummy device 80x25                                                    
[    0.000111] console [tty0] enabled                                                                
[    0.000180] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.32 BogoMIPS (lpj=2010163)                                                                                  
[    0.004861] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved     
[    0.004978] Security Framework initialized                                                        
[    0.005009] AppArmor: AppArmor initialized                                                        
[    0.005227] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)                     
[    0.006266] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)                      
[    0.006777] Mount-cache hash table entries: 256                                                   
[    0.006960] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)                     
[    0.006963] CPU: L2 Cache: 256K (64 bytes/line)                                                   
[    0.006966] CPU 0/0x0 -> Node 0                                                                   
[    0.006969] tseg: 0000000000                                                                      
[    0.006983] CPU: Physical Processor ID: 0                                                         
[    0.006985] CPU: Processor Core ID: 0                                                             
[    0.007007] mce: CPU supports 5 MCE banks                                                         
[    0.007017] using C1E aware idle routine                                                          
[    0.007019] Performance Counters: AMD PMU driver.                                                 
[    0.007024] ... version:                 0                                                        
[    0.007026] ... bit width:               48                                                       
[    0.007028] ... generic counters:        4                                                        
[    0.007030] ... value mask:              0000ffffffffffff                                         
[    0.007032] ... max period:              00007fffffffffff                                         
[    0.007034] ... fixed-purpose counters:  0                                                        
[    0.007036] ... counter mask:            000000000000000f                                         
[    0.007657] ACPI: Core revision 20090521                                                          
[    0.018466] Setting APIC routing to flat                                                          
[    0.018925] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1                                  
[    0.028942] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02                      
[    0.028995] Booting processor 1 APIC 0x1 ip 0x6000                                                
[    0.000999] Initializing CPU#1                                                                    
[    0.000999] Calibrating delay using timer specific routine.. 4019.90 BogoMIPS (lpj=2009952)       
[    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)                     
[    0.000999] CPU: L2 Cache: 256K (64 bytes/line)                                                   
[    0.000999] CPU 1/0x1 -> Node 0                                                                   
[    0.000999] CPU: Physical Processor ID: 0                                                         
[    0.000999] CPU: Processor Core ID: 1                                                             
[    0.000999] mce: CPU supports 5 MCE banks                                                         
[    0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106                      
[    0.099408] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02                      
[    0.099429] Brought up 2 CPUs                                                                     
[    0.099429] Total of 2 processors activated (8040.23 BogoMIPS).                                   
[    0.099429] CPU0 attaching sched-domain:                                                          
[    0.099429]  domain 0: span 0-1 level MC                                                          
[    0.099429]   groups: 0 1                                                                         
[    0.099429] CPU1 attaching sched-domain:                                                          
[    0.099429]  domain 0: span 0-1 level MC                                                          
[    0.099429]   groups: 1 0                                                                         
[    0.100043] devtmpfs: initialized                                                                 
[    0.105008] Booting paravirtualized kernel on bare hardware                                       
[    0.105195] regulator: core version 0.5                                                           
[    0.105195] Time: 11:11:45  Date: 11/18/09                                                        
[    0.105195] NET: Registered protocol family 16                                                    
[    0.105304] node 0 link 0: io port [1000, ffffff]                                                 
[    0.105307] node 0 link 0: io port [2000, 3fff]                                                   
[    0.105310] TOM: 0000000080000000 aka 2048M                                                       
[    0.105313] node 0 link 0: mmio [e0000000, efffffff]                                              
[    0.105318] node 0 link 0: mmio [a0000, bffff]                                                    
[    0.105321] node 0 link 0: mmio [80000000, fe0bffff]                                              
[    0.105324] bus: [00,ff] on node 0 link 0                                                         
[    0.105327] bus: 00 index 0 io port: [0, ffff]                                                    
[    0.105329] bus: 00 index 1 mmio: [80000000, fcffffffff]                                          
[    0.105332] bus: 00 index 2 mmio: [a0000, bffff]                                                  
[    0.105341] ACPI: bus type pci registered                                                         
[    0.105422] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255                      
[    0.105425] PCI: Not using MMCONFIG.                                                              
[    0.105427] PCI: Using configuration type 1 for base access                                       
[    0.107118] bio: create slab <bio-0> at 0                                                         
[    0.108839] ACPI: EC: Look up EC in DSDT                                                          
[    0.129476] ACPI: Interpreter enabled                                                             
[    0.129483] ACPI: (supports S0 S1 S3 S4 S5)                                                       
[    0.129526] ACPI: Using IOAPIC for interrupt routing                                              
[    0.129604] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255                      
[    0.139034] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources                     
[    0.144754] PCI: Using MMCONFIG at e0000000 - efffffff                                            
[    0.160651] ACPI Warning: Incorrect checksum in table [OEMB] - E2, should be D3 20090521 tbutils-246                                                                                                   
[    0.160946] ACPI: No dock devices found.                                                          
[    0.161156] ACPI: PCI Root Bridge [PCI0] (0000:00)                                                
[    0.161378] HPET not enabled in BIOS. You might try hpet=force boot option                        
[    0.161417] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f]                                     
[    0.161422] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f]                                     
[    0.161444] pci 0000:00:01.1: PME# supported from D3hot D3cold                                    
[    0.161451] pci 0000:00:01.1: PME# disabled                                                       
[    0.161506] pci 0000:00:02.0: reg 10 32bit mmio: [0xfbffb000-0xfbffbfff]                          
[    0.161529] pci 0000:00:02.0: supports D1 D2                                                      
[    0.161531] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold                           
[    0.161535] pci 0000:00:02.0: PME# disabled                                                       
[    0.161557] pci 0000:00:02.1: reg 10 32bit mmio: [0xfbffac00-0xfbffacff]                          
[    0.161581] pci 0000:00:02.1: supports D1 D2                                                      
[    0.161583] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold                           
[    0.161587] pci 0000:00:02.1: PME# disabled                                                       
[    0.161617] pci 0000:00:04.0: reg 20 io port: [0xffa0-0xffaf]                                     
[    0.161651] pci 0000:00:05.0: reg 10 io port: [0xd800-0xd807]                                     
[    0.161656] pci 0000:00:05.0: reg 14 io port: [0xd480-0xd483]                                     
[    0.161660] pci 0000:00:05.0: reg 18 io port: [0xd400-0xd407]                                     
[    0.161665] pci 0000:00:05.0: reg 1c io port: [0xd080-0xd083]                                     
[    0.161669] pci 0000:00:05.0: reg 20 io port: [0xd000-0xd00f]                                     
[    0.161674] pci 0000:00:05.0: reg 24 32bit mmio: [0xfbff9000-0xfbff9fff]                          
[    0.161710] pci 0000:00:05.1: reg 10 io port: [0xcc00-0xcc07]                                     
[    0.161715] pci 0000:00:05.1: reg 14 io port: [0xc880-0xc883]                                     
[    0.161719] pci 0000:00:05.1: reg 18 io port: [0xc800-0xc807]                                     
[    0.161724] pci 0000:00:05.1: reg 1c io port: [0xc480-0xc483]                                     
[    0.161728] pci 0000:00:05.1: reg 20 io port: [0xc400-0xc40f]                                     
[    0.161733] pci 0000:00:05.1: reg 24 32bit mmio: [0xfbff8000-0xfbff8fff]                          
[    0.161803] pci 0000:00:06.1: reg 10 32bit mmio: [0xfbff4000-0xfbff7fff]                          
[    0.161829] pci 0000:00:06.1: PME# supported from D3hot D3cold                                    
[    0.161833] pci 0000:00:06.1: PME# disabled                                                       
[    0.161872] pci 0000:00:08.0: reg 10 32bit mmio: [0xfbff3000-0xfbff3fff]                          
[    0.161877] pci 0000:00:08.0: reg 14 io port: [0xc080-0xc087]                                     
[    0.161882] pci 0000:00:08.0: reg 18 32bit mmio: [0xfbffa800-0xfbffa8ff]                          
[    0.161886] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfbffa400-0xfbffa40f]                          
[    0.161910] pci 0000:00:08.0: supports D1 D2                                                      
[    0.161913] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold                           
[    0.161917] pci 0000:00:08.0: PME# disabled                                                       
[    0.161957] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold                           
[    0.161960] pci 0000:00:0b.0: PME# disabled                                                       
[    0.162003] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold                           
[    0.162006] pci 0000:00:0c.0: PME# disabled                                                       
[    0.162042] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold                           
[    0.162046] pci 0000:00:0d.0: PME# disabled                                                       
[    0.162082] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold                           
[    0.162086] pci 0000:00:0e.0: PME# disabled                                                       
[    0.162121] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold                           
[    0.162125] pci 0000:00:0f.0: PME# disabled                                                       
[    0.162245] pci 0000:00:06.0: transparent bridge                                                  
[    0.162412] pci 0000:06:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]                          
[    0.162420] pci 0000:06:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]                          
[    0.162428] pci 0000:06:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]                          
[    0.162434] pci 0000:06:00.0: reg 24 io port: [0xec00-0xec7f]                                     
[    0.162439] pci 0000:06:00.0: reg 30 32bit mmio: [0xfebe0000-0xfebfffff]                          
[    0.162469] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'                                                                                         
[    0.162518] pci 0000:00:0f.0: bridge io port: [0xe000-0xefff]                                     
[    0.162521] pci 0000:00:0f.0: bridge 32bit mmio: [0xfc000000-0xfebfffff]                          
[    0.162525] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]                     
[    0.162543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]                                   
[    0.163042] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]                              
[    0.163270] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]                              
[    0.163373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]                              
[    0.163476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]                              
[    0.163578] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]                              
[    0.163680] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]                              
[    0.179919] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.                      
[    0.180245] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.                      
[    0.180559] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.                      
[    0.180871] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.                      
[    0.181190] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.                      
[    0.181502] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10                                
[    0.181814] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.                      
[    0.182134] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.                      
[    0.182446] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15                                
[    0.182759] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.                      
[    0.183078] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10                                
[    0.183390] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10                                
[    0.183711] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15                                
[    0.184028] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11                                
[    0.184341] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5                                 
[    0.184653] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11                                
[    0.184979] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5                                 
[    0.185352] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.                      
[    0.185667] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled.                      
[    0.185939] SCSI subsystem initialized                                                            
[    0.185989] libata version 3.00 loaded.                                                           
[    0.186026] usbcore: registered new interface driver usbfs                                        
[    0.186030] usbcore: registered new interface driver hub                                          
[    0.186036] usbcore: registered new device driver usb                                             
[    0.186036] PCI: Using ACPI for IRQ routing                                                       
[    0.189626] AppArmor: AppArmor Filesystem Enabled                                                 
[    0.191984] pnp: PnP ACPI init                                                                    
[    0.192004] ACPI: bus type pnp registered                                                         
[    0.201463] pnp: PnP ACPI: found 15 devices                                                       
[    0.201468] ACPI: ACPI bus type pnp unregistered                                                  
[    0.201486] system 00:09: ioport range 0x4d0-0x4d1 has been reserved                              
[    0.201490] system 00:09: ioport range 0x800-0x80f has been reserved                              
[    0.201494] system 00:09: ioport range 0x2000-0x207f has been reserved                            
[    0.201498] system 00:09: ioport range 0x2080-0x20ff has been reserved                            
[    0.201501] system 00:09: ioport range 0x2400-0x247f has been reserved                            
[    0.201505] system 00:09: ioport range 0x2480-0x24ff has been reserved                            
[    0.201509] system 00:09: ioport range 0x2800-0x287f has been reserved                            
[    0.201512] system 00:09: ioport range 0x2880-0x28ff has been reserved                            
[    0.201516] system 00:09: ioport range 0x2c00-0x2c7f has been reserved                            
[    0.201520] system 00:09: ioport range 0x2c80-0x2cff has been reserved                            
[    0.201524] system 00:09: iomem range 0xfbf80000-0xfbfbffff has been reserved                     
[    0.201528] system 00:09: iomem range 0xfee01000-0xfeefffff has been reserved                     
[    0.201536] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved                 
[    0.201539] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved                     
[    0.201549] system 00:0c: ioport range 0xa00-0xa0f has been reserved                              
[    0.201552] system 00:0c: ioport range 0xa10-0xa1f has been reserved                              
[    0.201559] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved                     
[    0.201566] system 00:0e: iomem range 0x0-0x9ffff could not be reserved                           
[    0.201570] system 00:0e: iomem range 0xc0000-0xcffff has been reserved                           
[    0.201573] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved                       
[    0.201577] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved                   
[    0.201581] system 00:0e: iomem range 0xff780000-0xffffffff has been reserved                     
[    0.206455] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01                                   
[    0.206458] pci 0000:00:06.0:   IO window: disabled                                               
[    0.206462] pci 0000:00:06.0:   MEM window: disabled                                              
[    0.206465] pci 0000:00:06.0:   PREFETCH window: disabled                                         
[    0.206468] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02                                   
[    0.206471] pci 0000:00:0b.0:   IO window: disabled                                               
[    0.206474] pci 0000:00:0b.0:   MEM window: disabled                                              
[    0.206477] pci 0000:00:0b.0:   PREFETCH window: disabled                                         
[    0.206480] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03                                   
[    0.206483] pci 0000:00:0c.0:   IO window: disabled                                               
[    0.206486] pci 0000:00:0c.0:   MEM window: disabled                                              
[    0.206489] pci 0000:00:0c.0:   PREFETCH window: disabled                                         
[    0.206492] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04                                   
[    0.206495] pci 0000:00:0d.0:   IO window: disabled                                               
[    0.206498] pci 0000:00:0d.0:   MEM window: disabled                                              
[    0.206501] pci 0000:00:0d.0:   PREFETCH window: disabled                                         
[    0.206504] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05                                   
[    0.206506] pci 0000:00:0e.0:   IO window: disabled                                               
[    0.206510] pci 0000:00:0e.0:   MEM window: disabled                                              
[    0.206513] pci 0000:00:0e.0:   PREFETCH window: disabled                                         
[    0.206517] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:06                                   
[    0.206520] pci 0000:00:0f.0:   IO window: 0xe000-0xefff                                          
[    0.206524] pci 0000:00:0f.0:   MEM window: 0xfc000000-0xfebfffff                                 
[    0.206528] pci 0000:00:0f.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff                
[    0.206538] pci 0000:00:06.0: setting latency timer to 64                                         
[    0.206545] pci 0000:00:0b.0: setting latency timer to 64                                         
[    0.206551] pci 0000:00:0c.0: setting latency timer to 64                                         
[    0.206558] pci 0000:00:0d.0: setting latency timer to 64                                         
[    0.206564] pci 0000:00:0e.0: setting latency timer to 64                                         
[    0.206985] Switched to high resolution mode on CPU 0                                             
[    0.206572] pci 0000:00:0f.0: setting latency timer to 64                                         
[    0.206579] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]                                        
[    0.206582] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]                        
[    0.206585] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]                                        
[    0.206588] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]                        
[    0.206592] pci_bus 0000:06: resource 0 io:  [0xe000-0xefff]                                      
[    0.206595] pci_bus 0000:06: resource 1 mem: [0xfc000000-0xfebfffff]                              
[    0.206598] pci_bus 0000:06: resource 2 pref mem [0xd0000000-0xdfffffff]                          
[    0.206713] NET: Registered protocol family 2                                                     
[    0.206903] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)                     
[    0.207403] Switched to high resolution mode on CPU 1                                             
[    0.208493] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)                 
[    0.210328] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)                          
[    0.210772] TCP: Hash tables configured (established 262144 bind 65536)                           
[    0.210775] TCP reno registered                                                                   
[    0.210948] NET: Registered protocol family 1                                                     
[    0.211030] Unpacking initramfs...                                                                
[    0.349816] Freeing initrd memory: 6102k freed                                                    
[    0.353002] Scanning for low memory corruption every 60 seconds                                   
[    0.353241] audit: initializing netlink socket (disabled)                                         
[    0.353287] type=2000 audit(1258542704.353:1): initialized                                        
[    0.356900] HugeTLB registered 2 MB page size, pre-allocated 0 pages                              
[    0.357130] VFS: Disk quotas dquot_6.5.2                                                          
[    0.357183] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)                             
[    0.357461] msgmni has been set to 1003                                                           
[    0.357600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)                  
[    0.357604] io scheduler noop registered                                                          
[    0.357606] io scheduler anticipatory registered                                                  
[    0.357609] io scheduler deadline registered                                                      
[    0.357648] io scheduler cfq registered (default)                                                 
[    0.882343] pci 0000:00:05.0: Enabling HT MSI Mapping                                             
[    0.882397] pci 0000:00:05.1: Enabling HT MSI Mapping                                             
[    0.882449] pci 0000:00:06.0: Enabling HT MSI Mapping                                             
[    0.882506] pci 0000:00:06.1: Enabling HT MSI Mapping                                             
[    0.882572] pci 0000:00:08.0: Enabling HT MSI Mapping                                             
[    0.882640] pci 0000:00:0b.0: Enabling HT MSI Mapping                                             
[    0.882713] pci 0000:00:0c.0: Enabling HT MSI Mapping                                             
[    0.882791] pci 0000:00:0d.0: Enabling HT MSI Mapping                                             
[    0.882875] pci 0000:00:0e.0: Enabling HT MSI Mapping                                             
[    0.882963] pci 0000:00:0f.0: Enabling HT MSI Mapping                                             
[    0.882984] pci 0000:06:00.0: Boot video device                                                   
[    0.884318]   alloc irq_desc for 24 on node 0                                                     
[    0.884321]   alloc kstat_irqs on node 0                                                          
[    0.884333] pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X                                    
[    0.884339] pcieport-driver 0000:00:0b.0: setting latency timer to 64                             
[    0.885303]   alloc irq_desc for 25 on node 0                                                     
[    0.885306]   alloc kstat_irqs on node 0                                                          
[    0.885319] pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X                                    
[    0.885324] pcieport-driver 0000:00:0c.0: setting latency timer to 64                             
[    0.886311]   alloc irq_desc for 26 on node 0                                                     
[    0.886313]   alloc kstat_irqs on node 0                                                          
[    0.886321] pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X                                    
[    0.886326] pcieport-driver 0000:00:0d.0: setting latency timer to 64                             
[    0.887312]   alloc irq_desc for 27 on node 0                                                     
[    0.887315]   alloc kstat_irqs on node 0                                                          
[    0.887323] pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X                                    
[    0.887329] pcieport-driver 0000:00:0e.0: setting latency timer to 64                             
[    0.888313]   alloc irq_desc for 28 on node 0                                                     
[    0.888315]   alloc kstat_irqs on node 0                                                          
[    0.888322] pcieport-driver 0000:00:0f.0: irq 28 for MSI/MSI-X                                    
[    0.888329] pcieport-driver 0000:00:0f.0: setting latency timer to 64                             
[    0.888429] pci-stub: invalid id string ""                                                        
[    0.888610] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010980000, using 5120k, total 262144k                                                                                                
[    0.888613] vesafb: mode is 1280x1024x16, linelength=2560, pages=1                                
[    0.888616] vesafb: scrolling: redraw                                                             
[    0.888619] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0                                       
[    0.888833] bootsplash 3.1.6-2004/03/31: looking for picture...                                   
[    0.907639] bootsplash: silentjpeg size 130564 bytes                                              
[    0.933066] bootsplash: ...found (1280x1024, 29083 bytes, v3).                                    
[    0.991964] Console: switching to colour frame buffer device 156x60                               
[    1.050461] fb0: VESA VGA frame buffer device                                                     
[    1.052486] Non-volatile memory driver v1.3                                                       
[    1.052490] Linux agpgart interface v0.103                                                        
[    1.052496] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled                              
[    1.052599] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A                                  
[    1.052704] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A                                  
[    1.053094] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A                                       
[    1.053408] Fixed MDIO Bus: probed                                                                
[    1.053416] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver                            
[    1.053962] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23                                     
[    1.053968]   alloc irq_desc for 23 on node 0                                                     
[    1.053971]   alloc kstat_irqs on node 0                                                          
[    1.053982] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23       
[    1.054017] ehci_hcd 0000:00:02.1: setting latency timer to 64                                    
[    1.054021] ehci_hcd 0000:00:02.1: EHCI Host Controller                                           
[    1.054062] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1                  
[    1.054092] ehci_hcd 0000:00:02.1: debug port 1                                                   
[    1.054098] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported                         
[    1.054122] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfbffac00                                      
[    1.060021] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00                                     
[    1.060054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002                         
[    1.060057] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1                    
[    1.060060] usb usb1: Product: EHCI Host Controller                                               
[    1.060062] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd                           
[    1.060065] usb usb1: SerialNumber: 0000:00:02.1                                                  
[    1.060172] usb usb1: configuration #1 chosen from 1 choice                                       
[    1.060209] hub 1-0:1.0: USB hub found                                                            
[    1.060220] hub 1-0:1.0: 10 ports detected                                                        
[    1.060308] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver                                
[    1.061739] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22                                     
[    1.061745]   alloc irq_desc for 22 on node 0                                                     
[    1.061748]   alloc kstat_irqs on node 0                                                          
[    1.061760] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22       
[    1.061781] ohci_hcd 0000:00:02.0: setting latency timer to 64                                    
[    1.061784] ohci_hcd 0000:00:02.0: OHCI Host Controller                                           
[    1.061804] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2                  
[    1.061841] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfbffb000                                      
[    1.114060] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001                         
[    1.114064] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1                    
[    1.114067] usb usb2: Product: OHCI Host Controller                                               
[    1.114069] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-desktop ohci_hcd                           
[    1.114072] usb usb2: SerialNumber: 0000:00:02.0                                                  
[    1.114181] usb usb2: configuration #1 chosen from 1 choice                                       
[    1.114220] hub 2-0:1.0: USB hub found                                                            
[    1.114231] hub 2-0:1.0: 10 ports detected                                                        
[    1.114324] uhci_hcd: USB Universal Host Controller Interface driver                              
[    1.114380] Initializing USB Mass Storage driver...                                               
[    1.114410] usbcore: registered new interface driver usb-storage                                  
[    1.114414] USB Mass Storage support registered.                                                  
[    1.114446] usbcore: registered new interface driver libusual                                     
[    1.114459] usbcore: registered new interface driver ums-alauda                                   
[    1.114472] usbcore: registered new interface driver ums-cypress                                  
[    1.114486] usbcore: registered new interface driver ums-datafab                                  
[    1.114500] usbcore: registered new interface driver ums-freecom                                  
[    1.114513] usbcore: registered new interface driver ums-isd200                                   
[    1.114527] usbcore: registered new interface driver ums-jumpshot                                 
[    1.114540] usbcore: registered new interface driver ums-karma                                    
[    1.114556] usbcore: registered new interface driver ums-onetouch                                 
[    1.114570] usbcore: registered new interface driver ums-sddr09                                   
[    1.114588] usbcore: registered new interface driver ums-sddr55                                   
[    1.114602] usbcore: registered new interface driver ums-usbat                                    
[    1.114649] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1                                
[    1.114652] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp                                                                                             
[    1.115052] serio: i8042 KBD port at 0x60,0x64 irq 1                                              
[    1.115156] mice: PS/2 mouse device common for all mice                                           
[    1.115298] rtc_cmos 00:02: RTC can wake from S4                                                  
[    1.115355] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0                                 
[    1.115389] rtc0: alarms up to one year, y3k, 114 bytes nvram                                     
[    1.115408] cpuidle: using governor ladder                                                        
[    1.115411] cpuidle: using governor menu                                                          
[    1.115788] usbcore: registered new interface driver hiddev                                       
[    1.115805] usbcore: registered new interface driver usbhid                                       
[    1.115808] usbhid: v2.6:USB HID core driver                                                      
[    1.131581] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0    
[    1.214857] TCP cubic registered                                                                  
[    1.214967] NET: Registered protocol family 10                                                    
[    1.215582] lo: Disabled Privacy Extensions                                                       
[    1.216024] lib80211: common routines for IEEE802.11 drivers                                      
[    1.216027] lib80211_crypt: registered algorithm 'NULL'                                           
[    1.216155] PM: Checking image partition /dev/disk/by-id/ata-SAMSUNG_HD321KJ_S0MQJ1FQ201621-part5 
[    1.216159] PM: Resume from disk failed.                                                          
[    1.216179] registered taskstats version 1                                                        
[    1.216355]   Magic number: 1:166:176                                                             
[    1.216398] acpi device:0c: hash matches                                                          
[    1.216448] rtc_cmos 00:02: setting system clock to 2009-11-18 11:11:46 UTC (1258542706)          
[    1.216594] Freeing unused kernel memory: 980k freed                                              
[    1.217007] Write protecting the kernel read-only data: 8856k                                     
[    1.259178] sata_nv 0000:00:05.0: version 3.5                                                     
[    1.259607] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21                                     
[    1.259614]   alloc irq_desc for 21 on node 0                                                     
[    1.259617]   alloc kstat_irqs on node 0                                                          
[    1.259630] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21        
[    1.259633] sata_nv 0000:00:05.0: Using SWNCQ mode                                                
[    1.259681] sata_nv 0000:00:05.0: setting latency timer to 64                                     
[    1.259841] scsi0 : sata_nv                                                                       
[    1.259995] scsi1 : sata_nv                                                                       
[    1.313744] ata1: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 21                     
[    1.313749] ata2: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 21                     
[    1.314221] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20                                     
[    1.314227]   alloc irq_desc for 20 on node 0                                                     
[    1.314230]   alloc kstat_irqs on node 0                                                          
[    1.314241] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20        
[    1.314245] sata_nv 0000:00:05.1: Using SWNCQ mode                                                
[    1.314291] sata_nv 0000:00:05.1: setting latency timer to 64                                     
[    1.314440] scsi2 : sata_nv                                                                       
[    1.314530] scsi3 : sata_nv                                                                       
[    1.316192] ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 20                     
[    1.316196] ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 20                     
[    1.324250] ata1: SATA link down (SStatus 0 SControl 300)                                         
[    1.334681] ata3: SATA link down (SStatus 0 SControl 300)                                         
[    1.475050] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)                                
[    1.497237] ata2.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7                                  
[    1.497240] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)                         
[    1.500250] ata2.00: configured for UDMA/133                                                      
[    1.500376] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5          
[    1.500547] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)                 
[    1.500615] sd 1:0:0:0: [sda] Write Protect is off                                                
[    1.500618] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00                                             
[    1.500642] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA                                                                                                    
[    1.500810]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >                                               
[    1.531021] sd 1:0:0:0: [sda] Attached SCSI disk                                                  
[    1.579031] usb 2-4: new low speed USB device using ohci_hcd and address 2                        
[    1.651047] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)                                
[    1.655146] ata4.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133                                
[    1.655150] ata4.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 31/32)                         
[    1.662130] ata4.00: configured for UDMA/133                                                      
[    1.662216] scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6V200E0   VA11 PQ: 0 ANSI: 5          
[    1.662224] ata4.00: Disabling SWNCQ mode (depth 1)                                               
[    1.662393] sd 3:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB)                 
[    1.662445] sd 3:0:0:0: [sdb] Write Protect is off                                                
[    1.662449] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00                                             
[    1.662475] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA                                                                                                    
[    1.662631]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >                                                    
[    1.706943] sd 3:0:0:0: [sdb] Attached SCSI disk                                                  
[    1.711406] pata_amd 0000:00:04.0: version 0.4.1                                                  
[    1.711451] pata_amd 0000:00:04.0: setting latency timer to 64                                    
[    1.711535] scsi4 : pata_amd                                                                      
[    1.711622] scsi5 : pata_amd                                                                      
[    1.714822] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14                       
[    1.714826] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15                       
[    1.770056] usb 2-4: New USB device found, idVendor=0458, idProduct=0056                          
[    1.770061] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0                     
[    1.770065] usb 2-4: Product: 4D Scroll Mouse                                                     
[    1.770067] usb 2-4: Manufacturer: Genius                                                         
[    1.770160] usb 2-4: configuration #1 chosen from 1 choice                                        
[    1.788535] input: Genius 4D Scroll Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input1                                                                                            
[    1.788645] generic-usb 0003:0458:0056.0001: input,hidraw0: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:02.0-4/input0                                                                  
[    1.868356] ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H20N, 1.01, max UDMA/33                           
[    1.868383] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)                                                                                            
[    1.874313] ata5.00: configured for UDMA/33                                                       
[    1.887503] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H20N 1.01 PQ: 0 ANSI: 5          
[    1.887655] ata6: port disabled. ignoring.                                                        
[    1.923547] Uniform Multi-Platform E-IDE driver                                                   
[    1.934103] processor LNXCPU:00: registered as cooling_device0                                    
[    1.934148] processor LNXCPU:01: registered as cooling_device1                                    
[    1.943369] udev: starting version 146                                                            
[    2.376564] PM: Marking nosave pages: 000000000009f000 - 0000000000100000                         
[    2.376571] PM: Basic memory bitmaps created                                                      
[    2.392000] PM: Basic memory bitmaps freed                                                        
[    2.402243] PM: Starting manual resume from disk                                                  
[    2.402247] PM: Resume from partition 8:5                                                         
[    2.402250] PM: Checking hibernation image.                                                       
[    2.402466] PM: Resume from disk failed.                                                          
[    2.803168] kjournald starting.  Commit interval 15 seconds                                       
[    2.803279] EXT3 FS on sda1, internal journal                                                     
[    2.803285] EXT3-fs: mounted filesystem with ordered data mode.                                   
[    4.098333] preloadtrace: systemtap: 0.9.9/0.142, base: ffffffffa0087000, memory: 49196+82372+22256+14000 data+text+ctx+net, probes: 44                                                                
[    5.598088] udev: starting version 146                                                            
[    5.635181] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00                                    
[    5.635202] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00                                    
[    5.645723] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2                  
[    5.645797] ACPI: Power Button [PWRF]                                                             
[    5.645880] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3         
[    5.645913] ACPI: Power Button [PWRB]                                                             
[    5.673226] parport_pc 00:08: reported by Plug and Play ACPI                                      
[    5.673303] parport0: PC-style at 0x378, irq 7 [PCSPP]                                            
[    5.681498] Floppy drive(s): fd0 is 1.44M                                                         
[    5.698910] FDC 0 is a post-1991 82077                                                            
[    5.708017] sd 1:0:0:0: Attached scsi generic sg0 type 0                                          
[    5.708057] sd 3:0:0:0: Attached scsi generic sg1 type 0                                          
[    5.708094] sr 4:0:0:0: Attached scsi generic sg2 type 5                                          
[    5.727734] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray                 
[    5.727740] Uniform CD-ROM driver Revision: 3.20                                                  
[    5.727878] sr 4:0:0:0: Attached scsi CD-ROM sr0                                                  
[    5.746048] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.                   
[    5.746497] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23                                     
[    5.746504] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23      
[    5.746510] forcedeth 0000:00:08.0: setting latency timer to 64                                   
[    5.746565] nv_probe: set workaround bit for reversed mac addr                                    
[    5.751118] nvidia: module license 'NVIDIA' taints kernel.                                        
[    5.751122] Disabling lock debugging due to kernel taint                                          
[    5.763782] EDAC MC: Ver: 2.1.0 Oct 27 2009                                                       
[    5.843961] input: PC Speaker as /devices/platform/pcspkr/input/input4                            
[    5.846893] ppdev: user-space parallel port driver                                                
[    5.894934] EDAC amd64_edac:  Ver: 3.2.0 Oct 27 2009                                              
[    6.106364] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19                                     
[    6.106371]   alloc irq_desc for 19 on node 0                                                     
[    6.106374]   alloc kstat_irqs on node 0                                                          
[    6.106387] nvidia 0000:06:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19         
[    6.106396] nvidia 0000:06:00.0: setting latency timer to 64                                      
[    6.106639] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009  
[    6.260941] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 00:16:17:bc:f4:87        
[    6.260946] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3         
[    6.261181] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141         
[    6.262870] EDAC amd64: This node reports that Memory ECC is currently disabled.                  
[    6.262877] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled                                                                                     
[    6.262880] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.                                                                                                  
[    6.262882]     Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.        
[    6.262884]     Might be a BIOS bug, if BIOS says ECC is enabled                                  
[    6.262885]     Use of the override can cause unknown side effects.                               
[    6.262914] amd64_edac: probe of 0000:00:18.2 failed with error -22                               
[    6.263820] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22                                     
[    6.263827] HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22      
[    6.263860] HDA Intel 0000:00:06.1: setting latency timer to 64                                   
[    6.504097] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/input/input5            
[    6.832316] Adding 1052216k swap on /dev/sda5.  Priority:-1 extents:1 across:1052216k             
[    7.047069] device-mapper: uevent: version 1.0.3                                                  
[    7.047622] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com      
[    8.046421] loop: module loaded                                                                   
[    8.088846] kjournald starting.  Commit interval 15 seconds                                       
[    8.089077] EXT3 FS on sda2, internal journal                                                     
[    8.089084] EXT3-fs: mounted filesystem with ordered data mode.                                   
[    8.104762] kjournald starting.  Commit interval 15 seconds                                       
[    8.105029] EXT3 FS on sda6, internal journal                                                     
[    8.105036] EXT3-fs: mounted filesystem with ordered data mode.                                   
[    8.472793] fuse init (API version 7.12)                                                          
[    9.415704] type=1505 audit(1258553514.698:2): operation="profile_load" pid=1041 name=/bin/ping   
[    9.461399] type=1505 audit(1258553514.744:3): operation="profile_load" pid=1042 name=/sbin/klogd 
[    9.535106] type=1505 audit(1258553514.817:4): operation="profile_load" pid=1043 name=/sbin/syslog-ng                                                                                                  
[    9.637371] type=1505 audit(1258553514.920:5): operation="profile_load" pid=1044 name=/sbin/syslogd                                                                                                    
[    9.713273] type=1505 audit(1258553514.996:6): operation="profile_load" pid=1045 name=/usr/sbin/avahi-daemon                                                                                           
[    9.786484] type=1505 audit(1258553515.069:7): operation="profile_load" pid=1046 name=/usr/sbin/identd                                                                                                 
[    9.856168] type=1505 audit(1258553515.138:8): operation="profile_load" pid=1047 name=/usr/sbin/mdnsd
[    9.949115] type=1505 audit(1258553515.231:9): operation="profile_load" pid=1048 name=/usr/sbin/nscd
[   10.080246] type=1505 audit(1258553515.362:10): operation="profile_load" pid=1049 name=/usr/sbin/ntpd
[   10.152348] type=1505 audit(1258553515.435:11): operation="profile_load" pid=1050 name=/usr/sbin/traceroute
[   10.649219] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.772312] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.805492] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   10.805661] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   10.805669] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   10.805677] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   12.644346] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ processors (2 cpu cores) (version 2.20.00)
[   12.644368] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[   12.644370] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[   13.699781]   alloc irq_desc for 29 on node 0
[   13.699787]   alloc kstat_irqs on node 0
[   13.699800] forcedeth 0000:00:08.0: irq 29 for MSI/MSI-X
[   13.766832] NET: Registered protocol family 17
[   23.978015] eth0: no IPv6 routers present
[   36.272058] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[   38.534207] bootsplash: status on console 0 changed to on
prideone@linux-u307:~>
@Xoslorg: Mirá, mi compu es una PC doméstica. No una notebook. Pero le agregué la línea que me dijiste (obviamente, poniendo como modelo a nVidia MCP55 High Definition Audio) pero nada. También probé poner la línea que tenía en opensuse 11.1 que tenía instalado, pero tampoco tengo éxito.

Voy a seguir intentando. T_T

Saludos!!
__________________
Responder Citando
  #5  
Antiguo 17-nov-2009, 17:28
Avatar de davmont
davmont davmont está desconectado
Moderador
 
Fecha de Ingreso: 13-diciembre-2007
Ubicación: ~/
Versión: 12.3 x86_64
Mensajes: 2.871
Agradecimientos: 78
Agradecido 141 Veces en 125 Mensajes
Poder de Credibilidad: 13
davmont está en el buen camino
eso es lo que te arroja tras ejecutar los comandos?

suele ayudar, además, usar dmesg|tail (para que sólo muestre los últimos mensajes del kernel)

un saludo
__________________
No atiendo consultas sobre Linux/openSUSE por privado, usad el foro que para algo está
Normas del foro, de lectura obligada


Responder Citando
  #6  
Antiguo 17-nov-2009, 23:43
Avatar de Xoslorg
Xoslorg Xoslorg está desconectado
Aforado
 
Fecha de Ingreso: 29-mayo-2006
Mensajes: 13
Agradecimientos: 0
Agradecido 0 Veces en 0 Mensajes
Poder de Credibilidad: 0
Xoslorg está en el buen camino
ciertamente pero no vienen especificadas todas, luego hay que ir a buscar el modelo en concreto a la documentacion de alsa.
Alli vienen el listado completo de chipset y en cada chipset los genericos y tambien si hay alguno especifico para el fabricante.
Cuando sepas el chipset mira en este listado, lo buscas y mira si alguno concuerda con tu fabricante.

http://www.mjmwired.net/kernel/Docum...dio-Models.txt

El mio equivalia a:

STAC92HD71B*
============
ref Reference board
dell-m4-1 Dell desktops
dell-m4-2 Dell desktops
dell-m4-3 Dell desktops
hp-m4 HP mini 1000
hp-dv5 HP dv series
hp-hdx HP HDX series
hp-dv4-1222nr HP dv4-1222nr (with LED support)
auto BIOS setup (default)

tienes que mirar cual se adapta mejor a la tuya.

Última edición por Xoslorg; 17-nov-2009 a las 23:55
Responder Citando
  #7  
Antiguo 20-nov-2009, 04:23
Avatar de Prideone
Prideone Prideone está desconectado
Aforado
 
Fecha de Ingreso: 06-agosto-2008
Ubicación: Buenos Aires, Argentina
Versión: 12.3
Mensajes: 66
Agradecimientos: 14
Agradecido 3 Veces en 3 Mensajes
Poder de Credibilidad: 10
Prideone está en el buen camino
Hola Xoslorg.

Mirá, realmente en la la página que me pasaste no encontré nada para mi placa. Tal vez sea yo, pero no encontré nada. Te paso una imagen de lo que el yast me dice acerca de la información del hardware de mi placa de sonido:



¿Como supiste vos lo del "STAC92HD71B"? ¿Como obtuviste ese dato en tu máquina? Si lo puedo obtener, puedo buscarlo dentro de la página que me diste.

Y si no espero a que se actualice el kernel de linux... ¿pero y si no se arregla? chan ^^

Sigo buscando información y probando ^^

Saludos!!
__________________
Responder Citando
  #8  
Antiguo 01-dic-2009, 20:32
Sibelius Sibelius está desconectado
Aforado
 
Fecha de Ingreso: 23-noviembre-2009
Versión: 11.2
Mensajes: 6
Agradecimientos: 0
Agradecido 0 Veces en 0 Mensajes
Poder de Credibilidad: 0
Sibelius está en el buen camino
Hola, ¿qué tal?

Yo no sé si el problema del sonido tiene algo que ver con que SUSE no cargue por defecto algún driver. Más bien pienso que hay problemas de configuración y de estabilidad. Lo digo porque yo, cuando he instalado OpenSUSE 11.2 desde el dvd, he podido escuchar sonido sin problemas, pero de repente ahora ya no, ni por los altavoces ni por los auriculares. No tengo ni idea de por qué pasa, pero sí sé que los drivers los carga el kernel, porque desde Yast hago la prueba de la tarjeta de sonido y se oye perfectamente. Parece tratarse más bien de algún problema con KDE 4.3

Por si alguien puede ayudarme, quiero decir que hace un par de días tuve que reiniciar el sistema con la opción "pci=noacpi", para probar una solución que había colgado alguien en otro foro respecto a un problema de cuelgue de OpenSUSE 11.2 cuando se le quiere apagar. No sé si es por eso, pero desde entonces, incluso aunque ya no incluyo esa opción en el GRUB, no oigo ningún sonido ... y el sistema se me sigue colgando exactamente igual que antes al apagarlo.

Creo que los de OpenSUSE han sacado la versión 11.2 con KDE4.3 algo inmadura, me produce errores básicos que nunca antes había tenido que sufrir con ninguna de las versiones anteriores. Espero que vayan colgando parches pronto para ir solucionando estos inconvenientes, ya que por lo demás la versión es extraordinaria y funciona muy bien.

Si alguien puede ayudarme con esto del sonido se lo agradeceré mucho
Responder Citando
  #9  
Antiguo 03-dic-2009, 19:13
Esael Esael está desconectado
Habitual
 
Fecha de Ingreso: 29-junio-2007
Versión: 11.3
Mensajes: 212
Agradecimientos: 5
Agradecido 3 Veces en 2 Mensajes
Poder de Credibilidad: 11
Esael está en el buen camino
Me uno a la peticion, no me funcionaba el sonido del hdmi de la tarjeta grafica. Hoy lo he intentado con unos altavoces a la placa base y pasa lo mismo, solo se escuchan las melodias de inicio y fin de sesion.
Responder Citando
  #10  
Antiguo 03-dic-2009, 21:54
Sibelius Sibelius está desconectado
Aforado
 
Fecha de Ingreso: 23-noviembre-2009
Versión: 11.2
Mensajes: 6
Agradecimientos: 0
Agradecido 0 Veces en 0 Mensajes
Poder de Credibilidad: 0
Sibelius está en el buen camino
hola, de nuevo

¡bueno, bueno! He conseguido por fin resolver yo solito mi problema con el sonido de OpenSUSE 11.2. Para ello he desactualizado la versión de KDE de la 4.3.3 a la 4.3.1, que viene con el dvd de instalación, y además he forzado la reinstalación de mi sistema base, con el kernel inicial, etc... ¡Y de nuevo tengo sonido en mi OpenSUSE!

Por tanto, parece confirmarse que, al menos en mi caso, el problema es que las actualizaciones del escritorio KDE 4.3 que están lanzando en estos últimos días los colaboradores de OpenSUSE no están suficientemente maduras.

De todas maneras, persiste el problema que tengo desde el principio con esta versión de SUSE: al apagar el portátil se cuelga, tengo que desconectar a lo bestia todas las fuentes de alimentación, y cuando vuelvo a poner en marcha SUSE ya no me habilita la tarjeta wifi, con lo que me veo obligado a iniciar Windows para conseguir habilitarla. Creo que esto es un problema del kernel 2.6.31.5 que nos suministra el dvd de instalación, así que sigo esperando con ansiedad el parche que corrija este aparatoso problema.

Gracias a todos
Responder Citando
Respuesta

Marcadores


(0 miembros y 1 visitantes)
 
Herramientas
Desplegado

Normas de Publicación
No puedes crear nuevos temas
No puedes responder mensajes
No puedes subir archivos adjuntos
No puedes editar tus mensajes

Los Códigos BB están Activado
Las Caritas están Activado
[IMG] está Activado
El Código HTML está Desactivado

Ir al Foro

Temas Similares
Tema Autor Foro Respuestas Último mensaje
Disponible openSUSE 11.2. openSUSE 11.2 is out. DiabloRojo Portal de ForoSUSE 67 09-abr-2010 07:07
¿Nvidia 1-ClickInstaller en OpenSuse 11.2? bakudan Software 4 24-ago-2009 22:48
Convocatoria para la comunidad Opensuse obelich General OpenSUSE 8 25-oct-2008 00:47
plasma en kde4.1 no arranca ÆPEDRAZA Software 18 27-sep-2008 01:13
Problema con sonido y Opensuse 10.3 head777 Hardware 2 08-ago-2008 21:17



Síguenos en Twitter Suscríbete a nuestras noticias Acompáñanos en Facebook


La franja horaria es GMT +2. Ahora son las 00:43.
Powered by vBulletin™
Copyright © vBulletin Solutions, Inc. All rights reserved.

Esta página está bajo una licencia de Creative Commons, salvo que no se indique lo contrario.
Creative Commons License

Valid CSS!

Diseño por:Designed by: vbdesigns.devbdesigns.de 
Contáctenos - ForoSUSE - Archivo - Declaración de Privacidad - Arriba