Registrarse
Home
Foros
Miembros
Calendario
Normas
Ayuda

Foros de usuarios de openSUSE
Retroceder   ForoSUSE > Zona Software > Escritorios: KDE, Gnome, otros...


Síguenos en Twitter Suscríbete a nuestras noticias Acompáñanos en Facebook

Respuesta
 
Herramientas Desplegado

problema plasma netbook
  #1  
Antiguo 13-nov-2010, 03:40
sic sic está desconectado
Aforado
 
Fecha de Ingreso: 28-febrero-2009
Versión: 11.4
Mensajes: 53
Agradecimientos: 0
Agradecido 2 Veces en 2 Mensajes
Poder de Credibilidad: 10
sic está en el buen camino
problema plasma netbook

Hola,
en un netbook, acer aspire one, donde acabo de instalar kde 4.5, tengo un problema con plasma netbook cuando voy a espacio de trabajo y elijo netbook, al colocar aplicar o aceptar, kde se cuelga y no me queda otra que cerrar sesión (ctrl+alt+del).

algunos datos

00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
03:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)

saludos
Responder Citando
  #2  
Antiguo 13-nov-2010, 14:43
Avatar de xisco
xisco xisco está desconectado
Miembro FOROSuSE
 
Fecha de Ingreso: 23-marzo-2006
Ubicación: Sector Horchata
Versión: La ultima estable
Mensajes: 1.697
Agradecimientos: 29
Agradecido 163 Veces en 133 Mensajes
Poder de Credibilidad: 14
xisco está en el buen camino
hola
no hace falta que pulses control alt del con control alt f1 pasas a consola de texto y como root haces init 3 y pasas al modo texto, despues con inint 5 vuleves al modo grafico.
De todas formas busca el log de xorg no se si se guarda en /var/log/xorg. algo.

Salu2
Responder Citando
  #3  
Antiguo 13-nov-2010, 19:50
sic sic está desconectado
Aforado
 
Fecha de Ingreso: 28-febrero-2009
Versión: 11.4
Mensajes: 53
Agradecimientos: 0
Agradecido 2 Veces en 2 Mensajes
Poder de Credibilidad: 10
sic está en el buen camino
acá está el archivo Xorg.0.log

Código:
[   510.231] 
X.Org X Server 1.8.0
Release Date: 2010-04-02
[   510.231] X Protocol Version 11, Revision 0
[   510.231] Build Operating System: openSUSE SUSE LINUX
[   510.231] Current Operating System: Linux linux-6l1d.site 2.6.34.7-0.5-default #1 SMP 2010-10-25 08:40:12 +0200 i686
[   510.231] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD1600BEVT-22ZCT0_WD-WX80A9964334-part6 resume=/dev/disk/by-id/ata-WDC_WD1600BEVT-22ZCT0_WD-WX80A9964334-part5 splash=silent quiet vga=0x314
[   510.232] Build Date: 19 August 2010  03:34:17PM
[   510.232]  
[   510.232] Current version of pixman: 0.18.0
[   510.232] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   510.232] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   510.232] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 13 19:43:24 2010
[   510.233] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   510.234] (==) No Layout section.  Using the first Screen section.
[   510.234] (**) |-->Screen "Default Screen" (0)
[   510.234] (**) |   |-->Monitor "Default Monitor"
[   510.234] (**) |   |-->Device "Default Device"
[   510.234] (==) Automatically adding devices
[   510.234] (==) Automatically enabling devices
[   510.235] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[   510.235] 	Entry deleted from font path.
[   510.235] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   510.235] 	Entry deleted from font path.
[   510.235] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[   510.235] 	Entry deleted from font path.
[   510.235] (==) FontPath set to:
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/URW/,
	/usr/share/fonts/cyrillic:unscaled,
	/usr/share/fonts/truetype/
[   510.235] (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[   510.235] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   510.235] (II) Loader magic: 0x822db60
[   510.235] (II) Module ABI versions:
[   510.235] 	X.Org ANSI C Emulation: 0.4
[   510.235] 	X.Org Video Driver: 7.0
[   510.235] 	X.Org XInput driver : 9.0
[   510.235] 	X.Org Server Extension : 3.0
[   510.262] (--) PCI:*(0:0:2:0) 8086:27ae:1025:022f Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0x58280000/524288, 0x40000000/268435456, 0x58300000/262144, I/O @ 0x000060f0/8
[   510.262] (--) PCI: (0:0:2:1) 8086:27a6:1025:022f Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x58200000/524288
[   510.262] (II) Open ACPI successful (/var/run/acpid.socket)
[   510.262] (II) LoadModule: "extmod"
[   510.265] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   510.265] (II) Module extmod: vendor="X.Org Foundation"
[   510.265] 	compiled for 1.8.0, module version = 1.0.0
[   510.265] 	Module class: X.Org Server Extension
[   510.265] 	ABI class: X.Org Server Extension, version 3.0
[   510.265] (II) Loading extension MIT-SCREEN-SAVER
[   510.265] (II) Loading extension XFree86-VidModeExtension
[   510.265] (II) Loading extension XFree86-DGA
[   510.265] (II) Loading extension DPMS
[   510.265] (II) Loading extension XVideo
[   510.265] (II) Loading extension XVideo-MotionCompensation
[   510.265] (II) Loading extension X-Resource
[   510.265] (II) LoadModule: "dbe"
[   510.267] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   510.267] (II) Module dbe: vendor="X.Org Foundation"
[   510.267] 	compiled for 1.8.0, module version = 1.0.0
[   510.267] 	Module class: X.Org Server Extension
[   510.267] 	ABI class: X.Org Server Extension, version 3.0
[   510.267] (II) Loading extension DOUBLE-BUFFER
[   510.268] (II) LoadModule: "glx"
[   510.269] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   510.270] (II) Module glx: vendor="X.Org Foundation"
[   510.270] 	compiled for 1.8.0, module version = 1.0.0
[   510.270] 	ABI class: X.Org Server Extension, version 3.0
[   510.270] (==) AIGLX enabled
[   510.270] (II) Loading extension GLX
[   510.270] (II) LoadModule: "record"
[   510.271] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   510.272] (II) Module record: vendor="X.Org Foundation"
[   510.272] 	compiled for 1.8.0, module version = 1.13.0
[   510.272] 	Module class: X.Org Server Extension
[   510.272] 	ABI class: X.Org Server Extension, version 3.0
[   510.272] (II) Loading extension RECORD
[   510.272] (II) LoadModule: "dri"
[   510.274] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   510.274] (II) Module dri: vendor="X.Org Foundation"
[   510.274] 	compiled for 1.8.0, module version = 1.0.0
[   510.274] 	ABI class: X.Org Server Extension, version 3.0
[   510.274] (II) Loading extension XFree86-DRI
[   510.274] (II) LoadModule: "dri2"
[   510.276] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   510.276] (II) Module dri2: vendor="X.Org Foundation"
[   510.276] 	compiled for 1.8.0, module version = 1.2.0
[   510.276] 	ABI class: X.Org Server Extension, version 3.0
[   510.276] (II) Loading extension DRI2
[   510.276] (==) Matched intel as autoconfigured driver 0
[   510.276] (==) Matched fbdev as autoconfigured driver 1
[   510.276] (==) Matched vesa as autoconfigured driver 2
[   510.276] (==) Assigned the driver to the xf86ConfigLayout
[   510.276] (II) LoadModule: "intel"
[   510.277] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   510.278] (II) Module intel: vendor="X.Org Foundation"
[   510.278] 	compiled for 1.8.0, module version = 2.12.0
[   510.278] 	Module class: X.Org Video Driver
[   510.278] 	ABI class: X.Org Video Driver, version 7.0
[   510.278] (II) LoadModule: "fbdev"
[   510.279] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   510.279] (II) Module fbdev: vendor="X.Org Foundation"
[   510.279] 	compiled for 1.8.0, module version = 0.4.1
[   510.279] 	ABI class: X.Org Video Driver, version 7.0
[   510.279] (II) LoadModule: "vesa"
[   510.281] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   510.281] (II) Module vesa: vendor="X.Org Foundation"
[   510.281] 	compiled for 1.8.0, module version = 2.2.1
[   510.281] 	Module class: X.Org Video Driver
[   510.281] 	ABI class: X.Org Video Driver, version 7.0
[   510.281] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[   510.282] (II) FBDEV: driver for framebuffer: fbdev
[   510.282] (II) VESA: driver for VESA chipsets: vesa
[   510.282] (++) using VT number 7

[   510.290] (II) Primary Device is: PCI 00@00:02:0
[   510.342] (WW) Falling back to old probe method for fbdev
[   510.342] (II) Loading sub module "fbdevhw"
[   510.342] (II) LoadModule: "fbdevhw"
[   510.343] (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
[   510.343] (II) Module fbdevhw: vendor="X.Org Foundation"
[   510.344] 	compiled for 1.8.0, module version = 0.0.2
[   510.344] 	ABI class: X.Org Video Driver, version 7.0
[   510.344] (WW) Falling back to old probe method for vesa
[   510.350] drmOpenDevice: node name is /dev/dri/card0
[   510.350] drmOpenDevice: open result is 9, (OK)
[   510.373] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[   510.373] drmOpenDevice: node name is /dev/dri/card0
[   510.373] drmOpenDevice: open result is 9, (OK)
[   510.373] drmOpenByBusid: drmOpenMinor returns 9
[   510.373] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[   510.373] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
[   510.373] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   510.374] (==) intel(0): RGB weight 888
[   510.374] (==) intel(0): Default visual is TrueColor
[   510.374] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[   510.374] (--) intel(0): Chipset: "945GME"
[   510.374] (==) intel(0): video overlay key set to 0x101fe
[   510.404] (II) intel(0): Output VGA1 using monitor section Default Monitor
[   510.506] (II) intel(0): Output LVDS1 has no monitor section
[   510.507] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   510.636] (II) intel(0): EDID for output VGA1
[   510.738] (II) intel(0): EDID for output LVDS1
[   510.739] (II) intel(0): Manufacturer: AUO  Model: 30d2  Serial#: 0
[   510.739] (II) intel(0): Year: 2008  Week: 1
[   510.739] (II) intel(0): EDID Version: 1.3
[   510.739] (II) intel(0): Digital Display Input
[   510.739] (II) intel(0): Max Image Size [cm]: horiz.: 22  vert.: 13
[   510.739] (II) intel(0): Gamma: 2.20
[   510.739] (II) intel(0): No DPMS capabilities specified
[   510.739] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   510.739] (II) intel(0): First detailed timing is preferred mode
[   510.739] (II) intel(0): redX: 0.588 redY: 0.351   greenX: 0.342 greenY: 0.567
[   510.739] (II) intel(0): blueX: 0.158 blueY: 0.123   whiteX: 0.313 whiteY: 0.329
[   510.739] (II) intel(0): Manufacturer's mask: 0
[   510.739] (II) intel(0): Supported detailed timing:
[   510.739] (II) intel(0): clock: 52.0 MHz   Image Size:  223 x 125 mm
[   510.739] (II) intel(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[   510.739] (II) intel(0): v_active: 600  v_sync: 603  v_sync_end 604 v_blanking: 644 v_border: 0
[   510.739] (II) intel(0): Unknown vendor-specific block f
[   510.739] (II) intel(0):  AUO
[   510.739] (II) intel(0):  B101AW03 V0
[   510.739] (II) intel(0): EDID (in hex):
[   510.739] (II) intel(0): 	00ffffffffffff0006afd23000000000
[   510.739] (II) intel(0): 	0112010380160d780ab9a59659579128
[   510.739] (II) intel(0): 	1f505400000001010101010101010101
[   510.740] (II) intel(0): 	0101010101015014004041582c201888
[   510.740] (II) intel(0): 	3100df7d000000180000000f00000000
[   510.740] (II) intel(0): 	00000000000000000020000000fe0041
[   510.740] (II) intel(0): 	554f0a202020202020202020000000fe
[   510.740] (II) intel(0): 	004231303141573033205630200a003c
[   510.740] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   510.740] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   510.740] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   510.740] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   510.740] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   510.740] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   510.740] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   510.740] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   510.740] (II) intel(0): Printing probed modes for output LVDS1
[   510.740] (II) intel(0): Modeline "1024x600"x60.1   52.00  1024 1048 1184 1344  600 603 604 644 -hsync -vsync (38.7 kHz)
[   510.740] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   510.741] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   510.741] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   510.741] (II) intel(0): Output VGA1 disconnected
[   510.741] (II) intel(0): Output LVDS1 connected
[   510.741] (II) intel(0): Using exact sizes for initial modes
[   510.741] (II) intel(0): Output LVDS1 using initial mode 1024x600
[   510.741] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   510.741] (II) intel(0): Kernel page flipping support detected, enabling
[   510.741] (==) intel(0): DPI set to (96, 96)
[   510.741] (II) Loading sub module "fb"
[   510.741] (II) LoadModule: "fb"
[   510.742] (II) Loading /usr/lib/xorg/modules/libfb.so
[   510.743] (II) Module fb: vendor="X.Org Foundation"
[   510.743] 	compiled for 1.8.0, module version = 1.0.0
[   510.743] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   510.743] (II) UnloadModule: "fbdev"
[   510.743] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   510.743] (II) UnloadModule: "fbdevhw"
[   510.743] (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
[   510.743] (II) UnloadModule: "vesa"
[   510.743] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   510.743] (==) Depth 24 pixmap format is 32 bpp
[   510.743] (II) intel(0): [DRI2] Setup complete
[   510.743] (II) intel(0): [DRI2]   DRI driver: i915
[   510.743] (**) intel(0): Tiling enabled
[   510.743] (**) intel(0): SwapBuffers wait enabled
[   510.743] (==) intel(0): VideoRam: 262144 KB
[   510.743] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[   510.744] (II) UXA(0): Driver registered support for the following operations:
[   510.744] (II)         solid
[   510.744] (II)         copy
[   510.744] (II)         composite (RENDER acceleration)
[   510.744] (II)         put_image
[   510.744] (II)         get_image
[   510.744] (==) intel(0): Backing store disabled
[   510.744] (==) intel(0): Silken mouse enabled
[   510.744] (II) intel(0): Initializing HW Cursor
[   510.784] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   510.787] (==) intel(0): DPMS enabled
[   510.788] (==) intel(0): Intel XvMC decoder disabled
[   510.788] (II) intel(0): Set up textured video
[   510.788] (II) intel(0): Set up overlay video
[   510.788] (II) intel(0): direct rendering: DRI2 Enabled
[   510.789] (--) RandR disabled
[   510.789] (II) Initializing built-in extension Generic Event Extension
[   510.789] (II) Initializing built-in extension SHAPE
[   510.789] (II) Initializing built-in extension MIT-SHM
[   510.789] (II) Initializing built-in extension XInputExtension
[   510.789] (II) Initializing built-in extension XTEST
[   510.789] (II) Initializing built-in extension BIG-REQUESTS
[   510.789] (II) Initializing built-in extension SYNC
[   510.789] (II) Initializing built-in extension XKEYBOARD
[   510.789] (II) Initializing built-in extension XC-MISC
[   510.789] (II) Initializing built-in extension SECURITY
[   510.790] (II) Initializing built-in extension XINERAMA
[   510.790] (II) Initializing built-in extension XFIXES
[   510.790] (II) Initializing built-in extension RENDER
[   510.790] (II) Initializing built-in extension RANDR
[   510.790] (II) Initializing built-in extension COMPOSITE
[   510.790] (II) Initializing built-in extension DAMAGE
[   510.816] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   510.816] (II) AIGLX: enabled GLX_INTEL_swap_event
[   510.816] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   510.816] (II) AIGLX: enabled GLX_SGI_make_current_read
[   510.816] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   510.816] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
[   510.816] (II) GLX: Initialized DRI2 GL provider for screen 0
[   510.817] (II) intel(0): Setting screen physical size to 270 x 158
[   510.921] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm
[   510.943] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[   510.943] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   510.943] (**) Power Button: Applying InputClass "LocalKeyboard"
[   510.943] (II) LoadModule: "evdev"
[   510.945] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   510.945] (II) Module evdev: vendor="X.Org Foundation"
[   510.945] 	compiled for 1.8.0, module version = 2.4.0
[   510.945] 	Module class: X.Org XInput Driver
[   510.945] 	ABI class: X.Org XInput driver, version 9.0
[   510.945] (**) Power Button: always reports core events
[   510.946] (**) Power Button: Device: "/dev/input/event5"
[   510.960] (II) Power Button: Found keys
[   510.960] (II) Power Button: Configuring as keyboard
[   510.960] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   510.960] (**) Option "xkb_rules" "evdev"
[   510.960] (**) Option "xkb_model" "evdev"
[   510.960] (**) Option "xkb_layout" "es"
[   510.973] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-B2C91445264C472B55552FCDFD845C5680E9C087.xkm
[   510.975] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[   510.975] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   510.975] (**) Video Bus: Applying InputClass "LocalKeyboard"
[   510.975] (**) Video Bus: always reports core events
[   510.975] (**) Video Bus: Device: "/dev/input/event6"
[   510.988] (II) Video Bus: Found keys
[   510.988] (II) Video Bus: Configuring as keyboard
[   510.988] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[   510.988] (**) Option "xkb_rules" "evdev"
[   510.988] (**) Option "xkb_model" "evdev"
[   510.988] (**) Option "xkb_layout" "es"
[   510.993] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   510.994] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   510.994] (**) Power Button: Applying InputClass "LocalKeyboard"
[   510.994] (**) Power Button: always reports core events
[   510.994] (**) Power Button: Device: "/dev/input/event2"
[   511.008] (II) Power Button: Found keys
[   511.008] (II) Power Button: Configuring as keyboard
[   511.008] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   511.008] (**) Option "xkb_rules" "evdev"
[   511.008] (**) Option "xkb_model" "evdev"
[   511.008] (**) Option "xkb_layout" "es"
[   511.010] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[   511.010] (EE) No input driver/identifier specified (ignoring)
[   511.011] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[   511.011] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   511.011] (**) Sleep Button: Applying InputClass "LocalKeyboard"
[   511.011] (**) Sleep Button: always reports core events
[   511.011] (**) Sleep Button: Device: "/dev/input/event4"
[   511.028] (II) Sleep Button: Found keys
[   511.028] (II) Sleep Button: Configuring as keyboard
[   511.028] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[   511.028] (**) Option "xkb_rules" "evdev"
[   511.028] (**) Option "xkb_model" "evdev"
[   511.028] (**) Option "xkb_layout" "es"
[   511.039] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event9)
[   511.039] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[   511.040] (**) PIXART USB OPTICAL MOUSE: always reports core events
[   511.040] (**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event9"
[   511.056] (II) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[   511.056] (II) PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[   511.056] (II) PIXART USB OPTICAL MOUSE: Found relative axes
[   511.056] (II) PIXART USB OPTICAL MOUSE: Found x and y relative axes
[   511.056] (II) PIXART USB OPTICAL MOUSE: Configuring as mouse
[   511.056] (**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[   511.056] (**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   511.056] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE)
[   511.057] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[   511.057] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[   511.057] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[   511.057] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[   511.057] (II) PIXART USB OPTICAL MOUSE: initialized for relative axes.
[   511.058] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse1)
[   511.058] (EE) No input driver/identifier specified (ignoring)
[   511.062] (II) config/udev: Adding input device CNF9011 (/dev/input/event8)
[   511.062] (**) CNF9011: Applying InputClass "evdev keyboard catchall"
[   511.062] (**) CNF9011: Applying InputClass "LocalKeyboard"
[   511.062] (**) CNF9011: always reports core events
[   511.062] (**) CNF9011: Device: "/dev/input/event8"
[   511.076] (II) CNF9011: Found keys
[   511.076] (II) CNF9011: Configuring as keyboard
[   511.076] (II) XINPUT: Adding extended input device "CNF9011" (type: KEYBOARD)
[   511.076] (**) Option "xkb_rules" "evdev"
[   511.076] (**) Option "xkb_model" "evdev"
[   511.076] (**) Option "xkb_layout" "es"
[   511.082] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   511.082] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   511.082] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[   511.082] (**) AT Translated Set 2 keyboard: always reports core events
[   511.082] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   511.096] (II) AT Translated Set 2 keyboard: Found keys
[   511.096] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   511.096] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[   511.096] (**) Option "xkb_rules" "evdev"
[   511.096] (**) Option "xkb_model" "evdev"
[   511.096] (**) Option "xkb_layout" "es"
[   511.098] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[   511.098] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   511.098] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   511.098] (II) LoadModule: "synaptics"
[   511.101] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   511.101] (II) Module synaptics: vendor="X.Org Foundation"
[   511.101] 	compiled for 1.8.0, module version = 1.2.2
[   511.101] 	Module class: X.Org XInput Driver
[   511.101] 	ABI class: X.Org XInput driver, version 9.0
[   511.101] (II) Synaptics touchpad driver version 1.2.2
[   511.102] (**) Option "Device" "/dev/input/event1"
[   511.148] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[   511.148] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[   511.148] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   511.148] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[   511.148] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[   511.148] (**) Option "HorizScrollDelta" "0"
[   511.188] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   511.188] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   511.204] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[   511.204] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   511.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[   511.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   511.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   511.236] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   511.237] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   511.237] (EE) No input driver/identifier specified (ignoring)
[   511.238] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[   511.238] (EE) No input driver/identifier specified (ignoring)
[   511.954] (II) intel(0): EDID vendor "AUO", prod id 12498
[   511.954] (II) intel(0): Printing DDC gathered Modelines:
[   511.955] (II) intel(0): Modeline "1024x600"x0.0   52.00  1024 1048 1184 1344  600 603 604 644 -hsync -vsync (38.7 kHz)
[   525.082] (II) intel(0): EDID vendor "AUO", prod id 12498
[   525.082] (II) intel(0): Printing DDC gathered Modelines:
[   525.083] (II) intel(0): Modeline "1024x600"x0.0   52.00  1024 1048 1184 1344  600 603 604 644 -hsync -vsync (38.7 kHz)
[   544.001] (II) intel(0): EDID vendor "AUO", prod id 12498
[   544.001] (II) intel(0): Printing DDC gathered Modelines:
[   544.001] (II) intel(0): Modeline "1024x600"x0.0   52.00  1024 1048 1184 1344  600 603 604 644 -hsync -vsync (38.7 kHz)
Responder Citando
  #4  
Antiguo 14-nov-2010, 09:10
Avatar de DiabloRojo
DiabloRojo DiabloRojo está desconectado
Super Moderador
 
Fecha de Ingreso: 19-marzo-2005
Ubicación: En un lugar del planeta Tierra
Versión: La ultima estable
Mensajes: 16.949
Agradecimientos: 629
Agradecido 2.681 Veces en 1.826 Mensajes
Poder de Credibilidad: 10
DiabloRojo llegará a ser famoso muy pronto
Cita:
(EE) No input driver/identifier specified (ignoring)
Este es el error, necesita especificar el driver a carga.

Pero las tarjetas graficas "Intel Corporation Mobile 945GME Express Integrated Graphics Controlle" ya están soportadas nativamente por Xorg. Lo que te ocurre es que a cambiar de modo de vsualizacion de KDE 4 se estropea el servidor gráfico y creo que el problema es otro. No tengo KDE 4.5 y desconozco la opción que comentas.
__________________
NORMAS A CUMPLIR EN LOS FOROS (Lectura obligatoria) Lo siento, no contesto privados sobre problemas con GNU/Linux.
Síguenos en TWITTER y en FACEBOOK
Código:
Buscador de   Alojamiento      Alojamiento     Otros
 paquetes:    de imágenes:     de ficheros:    buscadores:
Search        TinyPic          Ifile Wuala     Simple y Facil
Webpinstant   Paste Suse       SendSpace       TextSnip  Cl1p
Responder Citando
Respuesta

Marcadores


(0 miembros y 1 visitantes)
 
Herramientas
Desplegado

Normas de Publicación
No puedes crear nuevos temas
No puedes responder mensajes
No puedes subir archivos adjuntos
No puedes editar tus mensajes

Los Códigos BB están Activado
Las Caritas están Activado
[IMG] está Activado
El Código HTML está Desactivado

Ir al Foro

Temas Similares
Tema Autor Foro Respuestas Último mensaje
problema con plasma annubis Escritorios: KDE, Gnome, otros... 7 11-ene-2010 21:23
Plasma se queda en negro y problema con Alt+F2 Erestor Escritorios: KDE, Gnome, otros... 1 10-ene-2010 19:11
Problema con plasma! nick Software 19 04-nov-2009 21:53



Síguenos en Twitter Suscríbete a nuestras noticias Acompáñanos en Facebook


La franja horaria es GMT +2. Ahora son las 08:24.
Powered by vBulletin™
Copyright © vBulletin Solutions, Inc. All rights reserved.

Esta página está bajo una licencia de Creative Commons, salvo que no se indique lo contrario.
Creative Commons License

Valid CSS!

Diseño por:Designed by: vbdesigns.devbdesigns.de 
Contáctenos - ForoSUSE - Archivo - Declaración de Privacidad - Arriba