Registrarse
Home
Foros
Miembros
Calendario
Normas
Ayuda

Foros de usuarios de openSUSE
Retroceder   ForoSUSE > Zona OpenSUSE > Hardware


Síguenos en Twitter Suscríbete a nuestras noticias Acompáñanos en Facebook

Respuesta
 
Herramientas Desplegado

Configurar automount para dispositivos USB [solucionado]
  #1  
Antiguo 03-jun-2008, 08:47
Avatar de manelleon
manelleon manelleon está desconectado
Miembro Junior
 
Fecha de Ingreso: 05-diciembre-2005
Ubicación: L-V: Madrid ... V-D: Cáceres
Versión: Trabajando sobre 12.3 x86_64 + KDE 4
Mensajes: 531
Agradecimientos: 51
Agradecido 7 Veces en 6 Mensajes
Poder de Credibilidad: 13
manelleon está en el buen camino
Enviar un mensaje por MSN a manelleon
Cool Configurar automount para dispositivos USB [solucionado]

Hola a tod@s.

Después de reinstalar cómo unas 4 veces el sistema (openSUSE 10.3), he llegado a la conclusión que el kernel que más se ajusta a mi portátil (laptop) es el 2.6.22. Aunque el único problema que tengo, es que no me detecta cuando conecto los dispositivos USB.

He probado a verificar lo que aquí pone (http://docs.kde.org/stable/es/kdebase-runtime/userguide/multimedia.html), pero según parece tengo los servicios HALD - DBUS-DAEMON - UDEVD activos, sin embargo, no tengo automount activo.

¿Alguna sugerencia?

Un abrazo.

Esto es lo que me surge al ejecutar el comando DMESG:

Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: nVIDIA MPTABLE: Product ID: C51-MCP51 MPTABLE: APIC at: 0x
FEE00000
I/O APIC #2 at 0xFEC00000.
Setting APIC routing to flat
Processors: 2
swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 50296 bytes of per cpu data
Built 1 zonelists. Total pages: 378137
Kernel command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2120NW9XT6829V8E-
part6 vga=0x317 noapic resume=/dev/sda5 splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 1607.334 MHz processor.
Console: colour dummy device 80x25
Checking aperture...
CPU 0: aperture @ 1210000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 1507944k/1539072k available (2053k kernel code, 30732k reserved, 1017k d
ata, 316k init)
Calibrating delay using timer specific routine.. 3217.61 BogoMIPS (lpj=6435236)
Security Framework v1.0.0 initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
Unpacking initramfs... done
Freeing initrd memory: 4377k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 727 Objects with 78 Devices 246 Methods 26 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
ACPI: setting ELCR to 0200 (from 0ca0)
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Using local APIC timer interrupts.
result 12557311
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
spurious 8259A interrupt: IRQ7.
Calibrating delay using timer specific routine.. 3220.82 BogoMIPS (lpj=6441652)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
Brought up 2 CPUs
migration_cost=163
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000 - e06fffff
PCI: No mmconfig possible on device 00:18
PCI: No mmconfig possible on device 07:05
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 1 Wake, Enabled 1 Runtime GPEs
in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:..........................
.................................................
Initialized 25/26 Regions 5/5 Fields 24/24 Buffers 21/23 Packages (744 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:
Executed 0 _INI methods requiring 0 _STA executions (examined 83 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:10.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUS2] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LSI1] (IRQs 5 7 9 *10 11 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
pnp: 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
pnp: 00:00: iomem range 0x0-0x0 could not be reserved
pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:03: ioport range 0x1000-0x107f has been reserved
pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
pnp: 00:03: ioport range 0x1400-0x147f has been reserved
pnp: 00:03: ioport range 0x1480-0x14ff has been reserved
pnp: 00:03: ioport range 0x1800-0x187f has been reserved
pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
pnp: 00:03: ioport range 0x2000-0x203f has been reserved
PCI: Bridge: 0000:00:02.0
IO window: 4000-4fff
MEM window: b3000000-b31fffff
PREFETCH window: d0000000-d01fffff
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: b3200000-b33fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:10.0
IO window: disabled.
MEM window: b3400000-b34fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1212446431.476:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:05.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0cie00]
Allocate Port Service[0000:00:02.0cie03]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0cie00]
Allocate Port Service[0000:00:03.0cie03]
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20001280000, using 6144k, to
tal 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 78436 bytes
bootsplash: ...found (1024x768, 28133 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input2
NET: Registered protocol family 1
Freeing unused kernel memory: 316k freed
ACPI: Thermal Zone [THRM] (75 C)
SCSI subsystem initialized
libata version 3.00 loaded.
pata_amd 0000:00:0d.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:0d.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00
00000000013080 irq 14
ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00
00000000013088 irq 15
ata1.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.05, max MWDMA2
ata1.00: configured for MWDMA2
ata2: port disabled. ignoring.
scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.05 PQ: 0 ANSI: 5
sata_nv 0000:00:0e.0: version 3.4
PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 5 (level, low) -> IRQ
5
PCI: Setting latency timer of device 0000:00:0e.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x00000000000130c0 ctl 0x00000000000130b6 bmdma 0x00
00000000013090 irq 5
ata4: SATA max UDMA/133 cmd 0x00000000000130b8 ctl 0x00000000000130b2 bmdma 0x00
00000000013098 irq 5
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: FUJITSU MHV2120BH PL, 892C, max UDMA/100
ata3.00: 234441648 sectors, multi 16: LBA48
ata3.00: configured for UDMA/100
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2120B 892C PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.1[b] -> Link [LUS2] -> GSI 7 (level, low) -> IRQ
7
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 7, io mem 0xb0005000
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda:ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 11 (level, low) -> IRQ
11
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 11, io mem 0xb0004000
sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
sd 2:0:0:0: [sda] Attached SCSI disk
usb 2-6: new low speed USB device using ohci_hcd and address 2
usb 2-6: new device found, idVendor=046d, idProduct=c00e
usb 2-6: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-6: Product: USB-PS/2 Optical Mouse
usb 2-6: Manufacturer: Logitech
usb 2-6: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0
-6
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
swsusp: Marking nosave pages: 000000000009d000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
scsi 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
ieee80211_crypt: registered algorithm 'NULL'
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
ACPI: AC Adapter [ACAD] (on-line)
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 10 (level, low) -> IRQ
10
PCI: Setting latency timer of device 0000:00:14.0 to 64
forcedeth: using HIGHDMA
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input7
ACPI: Lid Switch [LID]
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:07 failed with error -16
bcm43xx driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0
ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 11
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 11 (level, low) -> IRQ
11
PCI: Setting latency timer of device 0000:03:00.0 to 64
bcm43xx: Chip ID 0x4311, rev 0x1
bcm43xx: Number of cores: 4
eth0 renamed to eth1
udev: renamed network interface eth0 to eth1
bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243
bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243
bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:10.1[b] -> Link [LAZA] -> GSI 10 (level, low) -> IRQ
10
PCI: Setting latency timer of device 0000:00:10.1 to 64
sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
ACPI: PCI Interrupt 0000:07:05.1[b] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ
11
mmc0: SDHCI at 0xb3400800 irq 11 DMA
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 9 (level, low) -> IRQ
9
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[b3400000-b34007ff] Max
Packet=[2048] IR/IT contexts=[4/4]
Adding 1638588k swap on /dev/sda5. Priority:-1 extents:1 across:1638588k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc0008714b200]
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.8)
AppArmor: AppArmor initialized
audit(1212446444.544:2): type=1505 info="AppArmor initialized" pid=2074
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (ve
rsion 2.00.00)
powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13
powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
audit(1212439260.908:3): audit_pid=3014 old=0 by auid=4294967295
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
NET: Registered protocol family 17
bootsplash: status on console 0 changed to on
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=64
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=37
0 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=350
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=25
7 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=237
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=37
0 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=350
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=37
0 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=350
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=34
0 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=320
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=18
1 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=161
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=18
1 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=161
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=18
1 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=161
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=64
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
eth1: no IPv6 routers present
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=64
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=64
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=64
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
irq 7: nobody cared (try booting with the "irqpoll" option)

Call Trace:
<IRQ> [<ffffffff80260de3>] __report_bad_irq+0x30/0x7d
[<ffffffff80261032>] note_interrupt+0x202/0x244
[<ffffffff80261ac2>] handle_level_irq+0xac/0xe6
[<ffffffff80208ce4>] default_idle+0x0/0x3d
[<ffffffff8020c136>] do_IRQ+0x6c/0xd6
[<ffffffff80208ce4>] default_idle+0x0/0x3d
[<ffffffff80208ce4>] default_idle+0x0/0x3d
[<ffffffff8020a141>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff80208d0d>] default_idle+0x29/0x3d
[<ffffffff80208daf>] cpu_idle+0x8e/0xb1

handlers:
[<ffffffff880e0d76>] (usb_hcd_irq+0x0/0x52 [usbcore])
Disabling IRQ #7
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=64
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.0.194 DST=224.0.0.251 LEN=64
TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
bcm43xx: core_up for active 802.11 core failed (-2)
__________________
¡¡¡ El rey (KDE3) ha muerto , viva el rey (KDE4) !!!

Manel y ...
OpenSuSE
... ¡¡¡ REIVINDICA LO SIMPLE !!! ...




Última edición por manelleon; 03-jun-2008 a las 09:09 Razón: Añadir información
Responder Citando
  #2  
Antiguo 03-jun-2008, 11:09
AlexDDR AlexDDR está desconectado
Aforado
 
Fecha de Ingreso: 17-enero-2008
Versión: 10.3
Mensajes: 94
Agradecimientos: 0
Agradecido 0 Veces en 0 Mensajes
Poder de Credibilidad: 11
AlexDDR está en el buen camino
alguna vez tuve ese problema y lo solucione/soulucionaba agregando al fstab una linea de codigo que decia usbfs

y creo que era ese

usbfs /proc/bus/usb usbfs noauto 0 0

se agrega al final del archivo /etc/fstab

bueno ojala te sirva, puedes probar el noauto cambiarlo por auto

saludos
Responder Citando
Configurar automount para dispositivos USB [Solucionado]
  #3  
Antiguo 03-jun-2008, 12:30
Avatar de manelleon
manelleon manelleon está desconectado
Miembro Junior
 
Fecha de Ingreso: 05-diciembre-2005
Ubicación: L-V: Madrid ... V-D: Cáceres
Versión: Trabajando sobre 12.3 x86_64 + KDE 4
Mensajes: 531
Agradecimientos: 51
Agradecido 7 Veces en 6 Mensajes
Poder de Credibilidad: 13
manelleon está en el buen camino
Enviar un mensaje por MSN a manelleon
Wink Configurar automount para dispositivos USB [Solucionado]

Cita:
Iniciado por AlexDDR
alguna vez tuve ese problema y lo solucione/soulucionaba agregando al fstab una linea de codigo que decia usbfs

y creo que era ese

usbfs /proc/bus/usb usbfs noauto 0 0

se agrega al final del archivo /etc/fstab

bueno ojala te sirva, puedes probar el noauto cambiarlo por auto

saludos
Al final te he hecho caso. He revisado mi archivo /etc/fstab y en la línea USBFS he cambiado el parámetro NOAUTO, por AUTO ... y ya me monta los dispositivos USB's y DVD's automáticamente.

Gracias por la ayuda. Un abrazo.
__________________
¡¡¡ El rey (KDE3) ha muerto , viva el rey (KDE4) !!!

Manel y ...
OpenSuSE
... ¡¡¡ REIVINDICA LO SIMPLE !!! ...




Última edición por manelleon; 03-jun-2008 a las 12:32 Razón: Cerrar el hilo
Responder Citando
automount usb pens 11.1
  #4  
Antiguo 12-ene-2009, 22:17
lorvalidor lorvalidor está desconectado
Aforado
 
Fecha de Ingreso: 12-febrero-2008
Versión: OpenSuse 11.1 64b kde 4.2
Mensajes: 8
Agradecimientos: 2
Agradecido 0 Veces en 0 Mensajes
Poder de Credibilidad: 0
lorvalidor está en el buen camino
automount usb pens 11.1

Hola,

tengo instalado opensuse 11.1 con kde 4.1, el problema que tengo es que no me monta automaticamente las memorias usb. He modificado la linea del fstab que hace referencia este mismo hilo. He modificado el archivo /usr/share/Policykit/policy/org.freedesktop.hal.storage.policy con este procedimiento http://sathyasays.com/2008/08/20/how...n-opensuse-11/
Pero sigue sin funcionar.
¿Alguna idea?

Gracias.
Responder Citando
  #5  
Antiguo 14-ene-2009, 22:58
Avatar de manelleon
manelleon manelleon está desconectado
Miembro Junior
 
Fecha de Ingreso: 05-diciembre-2005
Ubicación: L-V: Madrid ... V-D: Cáceres
Versión: Trabajando sobre 12.3 x86_64 + KDE 4
Mensajes: 531
Agradecimientos: 51
Agradecido 7 Veces en 6 Mensajes
Poder de Credibilidad: 13
manelleon está en el buen camino
Enviar un mensaje por MSN a manelleon
Wink

Cita:
Iniciado por lorvalidor
Hola,

tengo instalado opensuse 11.1 con kde 4.1, el problema que tengo es que no me monta automaticamente las memorias usb. He modificado la linea del fstab que hace referencia este mismo hilo. He modificado el archivo /usr/share/Policykit/policy/org.freedesktop.hal.storage.policy con este procedimiento http://sathyasays.com/2008/08/20/how...n-opensuse-11/
Pero sigue sin funcionar.
¿Alguna idea?

Gracias.
A mi lo que realmente me daba problemas, aparte de la instrucción en el USBFS, era el ACPI, dado el modelo de mi ordenador (HP-Compaq Presario V6139EU). Fijate en las opciones de arranque que no tengas algún parámetro que no te active el ACPI.

Un abrazo.
__________________
¡¡¡ El rey (KDE3) ha muerto , viva el rey (KDE4) !!!

Manel y ...
OpenSuSE
... ¡¡¡ REIVINDICA LO SIMPLE !!! ...



Responder Citando
Respuesta

Marcadores


(0 miembros y 1 visitantes)
 
Herramientas
Desplegado

Normas de Publicación
No puedes crear nuevos temas
No puedes responder mensajes
No puedes subir archivos adjuntos
No puedes editar tus mensajes

Los Códigos BB están Activado
Las Caritas están Activado
[IMG] está Activado
El Código HTML está Desactivado

Ir al Foro

Temas Similares
Tema Autor Foro Respuestas Último mensaje
script simple para eliminar archivos [SOLUCIONADO] Juan Carlos Programación y Scripts 3 18-mar-2008 12:03
Bienvenido a GNU/Linux (y III) karlggest FAQs, Manuales y Tutoriales 0 13-ene-2008 18:26
Bienvenido a GNU/Linux (y II) karlggest FAQs, Manuales y Tutoriales 0 09-ene-2008 02:10
Configurar AP para mi portátil. trykenter General OpenSUSE 12 30-jul-2007 00:50
Ayuda para configurar touchpad Mdk Hardware 9 24-ago-2004 09:29



Síguenos en Twitter Suscríbete a nuestras noticias Acompáñanos en Facebook


La franja horaria es GMT +2. Ahora son las 02:51.
Powered by vBulletin™
Copyright © vBulletin Solutions, Inc. All rights reserved.

Esta página está bajo una licencia de Creative Commons, salvo que no se indique lo contrario.
Creative Commons License

Valid CSS!

Diseño por:Designed by: vbdesigns.devbdesigns.de 
Contáctenos - ForoSUSE - Archivo - Declaración de Privacidad - Arriba